Skip to Content
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • 15 million satisfied customers 15 million satisfied customers
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store

Kdte254ess Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Dishwasher Lower Rack Track Assembly (Left Side)
Genuine Whirlpool part
By: Whirlpool
Part Number: W10822165

Left-hand track assembly for dishwasher lower rack. Guides rack smoothly in and out. Replace if broken, cracked, or worn plastic race causes instability.

Do-It-Yourself Stories from Customers like You Lower basket l & r track repair   Tim C. • Hubert , NC • April 21, 2020

The lower basket L& R track bearing brackets on my KitchenAid dishwasher (KDTE704DSSO) finally gave out (ball bearings everywhere) after (6) years of daily, family use. The service techs provided me with all the information I needed to successfully and quickly complete my project. My parts were mailed to me very quickly and my dishwasher was up and running in short order. The parts were clean and in perfect working condition. (After pulling your dishwasher out, there are two sets of screws on... Read more

More
$115.49
Compare At:
$137.43
You Save:
$21.94

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP302868

Color: Black. Screw for lower toe panel. For Biscuit screw use 3400865, for white screw use WP3400836.

Do-It-Yourself Stories from Customers like You Dishwasher door panel was rusting   Prashant K. • Fishers , IN • October 11, 2014

I had no hope of separating the panel from the frame without damaging the frame since the two parts were rusted pretty badly and the screws holding the panel to the frame were completely beyond salvage. So I had to replace both the panel and the frame. I ended up removing the electrical/electronic connections, removing the panel/frame from the hinge and then replacing it with the new parts. Took about 90 minutes but the hardest part was removing other items from the rusting frame without... Read more

More
$7.56
Compare At:
$8.90
You Save:
$1.34

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Dishwasher Upper Dishrack Support Bracket
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10473809

Right-hand dishrack support bracket mounts to the interior side wall of your dishwasher tub to stabilize the upper rack. Replace if cracked or broken.

Do-It-Yourself Stories from Customers like You Bottom track was worn out on left hand side   Jon K. • Bellevue , NE • February 23, 2020

Removed the bottom rack from the dishwasher. Removed the 2 front plates at bottom of the dishwasher. Removed the two screws from the top of the dishwasher holding the dishwasher to the counter-top. Pulled the dishwasher out. Removed the 8 mm screws from the outside of the dishwasher-- 4 per side (Underneath the sound proofing). Pulled the old tracks and placed the new tracks into place and tightened the screws back up. Pushed the dishwasher back into place. Reinstalled the screws securing... Read more

More
$26.95
Compare At:
$32.34
You Save:
$5.39

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Dishwasher Turbidity Sensor
Genuine Whirlpool part
By: Whirlpool
Part Number: W11084121

Dishwasher won't advance to dry cycle or runs too long? The turbidity sensor monitors water clarity to control cycle length. Accessed from underneath.

More
$56.34
Compare At:
$67.04
You Save:
$10.70

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Dishwasher Dishrack Support (Left-Hand)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10473807

Left-hand dishrack support mounts to the rack assembly to hold it level and guide smooth travel. Replace if cracked, broken, or worn to restore alignment.

Do-It-Yourself Stories from Customers like You Bottom track was worn out on left hand side   Jon K. • Bellevue , NE • February 23, 2020

Removed the bottom rack from the dishwasher. Removed the 2 front plates at bottom of the dishwasher. Removed the two screws from the top of the dishwasher holding the dishwasher to the counter-top. Pulled the dishwasher out. Removed the 8 mm screws from the outside of the dishwasher-- 4 per side (Underneath the sound proofing). Pulled the old tracks and placed the new tracks into place and tightened the screws back up. Pushed the dishwasher back into place. Reinstalled the screws securing... Read more

More
$26.95
Compare At:
$32.07
You Save:
$5.12

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Cover
Genuine Whirlpool part
By: Whirlpool
Part Number: W10795980

The Screw Hole Cap is an OEM part for Whirlpool dishwashers. It covers the screw holes, providing a clean and finished appearance while preventing moisture and debris from entering the screw openings. This helps maintain the dishwasher's aesthetic and ensures that screws remain protected from rust and corrosion.

Causes of a bad screw hole cap can include regular wear and tear, accidental impacts, or misplacement during maintenance.

Symptoms of a bad screw hole cap include:

  • Missing or loose caps
  • Moisture or debris accumulating in screw holes
  • Visible wear or damage to the caps

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Screw hole plastic cap broke during installation   Lori D. • Louisville , KY • March 28, 2017

I ordered the part and it was delivered the next day! Amazing experience! Read more

More
$13.95
Compare At:
$16.60
You Save:
$2.65

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Dishwasher Door Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: W11213719

Prevents water leaks around your dishwasher door during wash cycles. Replace if you notice moisture, dripping, or pooling water at the base of the door.

More
$78.29
Compare At:
$93.17
You Save:
$14.88

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Dishwasher Rack Dishrack
Genuine Whirlpool part
By: Whirlpool
Part Number: W11498446

The Lower Dishrack is an OEM part for Whirlpool dishwashers. It provides space for arranging and securely holding your dishes during the dishwashing cycle.

A bad lower dishwasher dishrack can be caused by regular wear and tear, exposure to hot water and cleaning agents, or accidental damage. If you notice rusting, chipping, or broken tines on the dishrack, it may indicate a problem with the rack itself.

Symptoms of a bad lower dishwasher dishrack include:

  • Rust stains or residue on your dishes after a wash cycle
  • Difficulty in loading or unloading dishes 
  • Unstable or wobbling dishes during the wash cycle
  • Limited space or reduced capacity for dishes

Replace your faulty lower dishwasher dishrack with this genuine OEM part to restore your dishwasher. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

Do-It-Yourself Stories from Customers like You Broken roller and rusty lower rack   Duane D. • Lancaster , CA • November 11, 2024

I replaced the rack and put the new roller on it with the old ones I took off of the old rusty rack. Read more

More
$202.95
Compare At:
$241.51
You Save:
$38.56

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Mounting Bracket (Component Support)
Genuine Whirlpool part
By: Whirlpool
Part Number: W10837623

This mounting bracket secures an appliance component in the correct position, providing stable support and alignment. Replacing a damaged bracket helps stop looseness and vibration that can lead to noise, poor fit, or premature wear.

  • Provides a rigid mounting point to hold the related assembly in place
  • Restores proper spacing and alignment for consistent operation
  • Helps reduce rattling, buzzing, or vibration from movement
  • Replaces cracked, bent, or corroded brackets that no longer hold securely
What's included: 1 mounting bracket Install notes:
  • Disconnect power; shut off water supply if applicable
  • Note the original orientation; transfer any clips, spacers, or grommets from the old bracket
  • Reuse existing screws/fasteners; hand-start threads to avoid cross-threading
  • Do not overtighten fasteners; confirm clearance and smooth operation before reassembly

Do-It-Yourself Stories from Customers like You Puddles on the floor after a load   Christopher P. • Derry , NH • February 03, 2019

The original gasket was popping loose and not always noticeable when loading. Followed video for removal, cleaning channel with q-tips, and installation of new gasket. Read more

More
$22.53
Compare At:
$26.81
You Save:
$4.28

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Dishwasher Sump Cap Cover
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10455272

This is a cap or cover that fits over the sump area near the pump outlet at the bottom of the dishwasher. It helps seal and direct water flow within the sump and pump assembly during wash and drain cycles. Replace this cover if it is cracked, warped, or missing, which can cause water leaks or reduced wash performance.

Do-It-Yourself Stories from Customers like You The rubber seal where the diverter motor slides into the sump seal was broke and motor was making a funny noise   Wendy W. • Valdosta , GA • April 10, 2020

Since I was already taking the sump seal out, I decided to replace the two motors that looked nasty and was making noise too. The ease of ordering these parts with your site made this repair much faster including the repair videos you offer. Thank you for your help. Read more

More
$52.95
Compare At:
$63.54
You Save:
$10.59

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Dishwasher Door Latch Strike
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10544004

Dishwasher won't start or door won't close? The door latch strike creates a secure catch point for proper door latching. Easy DIY repair.

Do-It-Yourself Stories from Customers like You If the control button beep to accept command it would not start just kept beeping   Gale B. • Palmer , AK • July 27, 2025

Replaced the strike plate so door knew it was shut, replaced latch too then switched the new control button pushy button bar Read more

More
$51.62
Compare At:
$60.91
You Save:
$9.29

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Power Cord Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 4317824

The Power Cord Kit is an OEM replacement part for Whirlpool dishwashers. It is a 3-prong grounded, 16-gauge cord that includes all the hardware needed for installation. Includes all hardware needed for installation.

Causes of a bad power cord can include normal wear and tear over years of use, accidental impacts or cuts to the wiring, or improper installation that damages components.

Symptoms of a bad power cord include:

  • The dishwasher not turning on or completing cycles
  • Warm or hot power cords during operation
  • Frayed, cracked, or exposed copper wiring

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Mice chewed the drain hose and power cord   Noah C. • Eastsound , WA • February 16, 2015

Read directions on how to change the power cord and watched video on your site on how to change the drain hose. Everything went perfectly. Read more

More
$22.53
Compare At:
$26.81
You Save:
$4.28

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9741232

Quantity of ONE. Size: 8-18 x 5/8 inch. (#8 screw, 18 threads per inch, 5/8 inch long)

Do-It-Yourself Stories from Customers like You Leaking around dishwasher door previous repair missing parts   Patrick R. • Peachtree City , GA • November 15, 2014

I ordered new seals from AppliancePartsPros.com. Finding the right seals was very easy, all based on model number of the appliance. While looking my unit over for other signs of wear, I noticed that a repair done by the prior homeowner to the lower wash arm was done improperly: a seal there was set protruding from the cover, the cover was missing screws, and the arm was missing the upper bushing. So I ordered a new seal, the missing screws, and both the top and bottom bushings (just to be... Read more

More
$7.56
Compare At:
$8.90
You Save:
$1.34

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Appliance Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10348409

Fixes loose panels, rattling doors, or wobbly components caused by stripped or missing screws. Secures brackets, covers, and mounting hardware. Easy DIY.

Do-It-Yourself Stories from Customers like You Dishwasher would not start   Mark M. • Midlothian , VA • July 16, 2016

Maytag Dishwasher (about 5 years old). Some of the buttons had stopped functioning. Then the Start button began choosing whether or not to work. Eventually it would not start at all. Upon removing the control panel, the first thing I noticed was that the brackets that hold the two lower screws were broken. (So this was the reason that the door was so hard to open from the time it was new.) I trouble shot the thermal fuse, the door-latch switches, and inspected the control board trying to find... Read more

More
$7.56
Compare At:
$8.98
You Save:
$1.42

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Track
Genuine Whirlpool part
By: Whirlpool
Part Number: W10914507

The Dishrack Track (Right) is an OEM part for Whirlpool dishwashers. It is responsible for supporting the third-level dishrack and allowing it to glide in and out smoothly during the loading and unloading process. This track is designed specifically for the right side of the third-level rack. 

Causes of a bad track include damage from heavy use over time, such as dulling or bending of the metal track surface from repeated loading/unloading of dishes. Debris or residue buildup along the track can also cause issues.

Symptoms of a bad track include:  

  • Rack that will not fully extend or retract
  • Binding or sticking during rack movement  
  • Rack that will not stay positioned above

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

More
$78.78
Compare At:
$93.75
You Save:
$14.97

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Dishwasher Tine Row Holder
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8539102

Secures tines in your dishwasher rack to hold dishes and utensils in place. Replace if cracked, broken, or missing to restore proper rack function.

Do-It-Yourself Stories from Customers like You Broken plastic parts   Debbie K. • Manson , WA • March 04, 2017

Ordered and installed new parts. Amazingly fast service and user friendly website. Read more

More
$60.52
Compare At:
$72.62
You Save:
$12.10

IN STOCK
Ships Monday Guaranteed
Add to Cart
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store