Kitchenaid Kgss907xsp01 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195934
Fix F5-E1 errors or doors that won't stay closed with a new door latch assembly. Solves latch cycling issues and false door-open warnings.
Do-It-Yourself Stories from Customers like You
Said door was open even when it was close Connie S. • River , KY • August 11, 2016
Replaced the latch. Everything works fine now
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4451722
Fixes heat loss and hot exterior oven door surfaces. Thermal insulation maintains internal temperature. Advanced repair requiring door removal, 15+ min.
Do-It-Yourself Stories from Customers like You
Heat loss due to old worn door gasket door insulation damaged Raymond M. • Mundelein , IL • February 09, 2016
Replacing the Door Gasket is very easy and will take about 2-3 mins per door. Simply remove the Gasket Retainer (1 screw), and pull off the old Gasket. Install the new gasket by simply pushing the gasket clips into the holes where the old clips came out from. Be sure to start gasket at the first hole either side of the Gasket Retainer and work your way around. Reinstall Gasket retainer.
The Door Insulation is a very involved repair, and best to follow specific repair manual instructions. Door...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9755542
Probe indicator stays on or won't light when plugged in? This meat probe monitors internal food temperature. Easy DIY fix with video guide included.
Do-It-Yourself Stories from Customers like You
We purchased home and these parts were missing Mark P. • Little Egg Harbor , NJ • October 23, 2015
Purchased the parts on-line.
The website is very easy to use and found it easy to identify the parts needed.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4448933
The Gasket Retainer is an OEM part for Whirlpool ovens. It secures the oven door gasket in place, ensuring a tight seal that prevents heat from escaping during cooking. This helps maintain consistent cooking temperatures and improves energy efficiency.
Causes of a bad oven gasket retainer can include wear and tear from repeated use, heat damage, or accidental impact that causes the retainer to break or become misshapen.
Symptoms of a bad oven gasket retainer include:
- The oven door gasket not staying in place
- Heat escaping from the oven, leading to uneven cooking
- Visible damage or deformation of the retainer
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Heat loss due to old worn door gasket door insulation damaged Raymond M. • Mundelein , IL • February 09, 2016
Replacing the Door Gasket is very easy and will take about 2-3 mins per door. Simply remove the Gasket Retainer (1 screw), and pull off the old Gasket. Install the new gasket by simply pushing the gasket clips into the holes where the old clips came out from. Be sure to start gasket at the first hole either side of the Gasket Retainer and work your way around. Reinstall Gasket retainer.
The Door Insulation is a very involved repair, and best to follow specific repair manual instructions. Door...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4173175
120-130 volt, 15 watt.
Do-It-Yourself Stories from Customers like You
Oven light burned out and being that it was an unusual design the replacement can not be found in nearby stores Janet R. • Greenville , WI • January 15, 2016
Found Appliance Pros online and they carried the bulb I needed. I ordered on Monday and got it the next day. I bake a lot so it is really annoying when the bulb burns out. My oven actually has two of these bulbs and they are expensive.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9761566
Replaces worn, cracked, or unresponsive oven control panel touch pad. Installs on the front control display where buttons are pressed to operate functions.
Do-It-Yourself Stories from Customers like You
The kitchen aid oven keypad had an error message saying a key was stuck Michelle I. • Hayden , ID • September 09, 2014
I read about the particular error code on blogs online. Most people agreed that it was the keypad membrane that was not working. I have never done any repairs on an appliance, but YouTube had great videos of someone changing out that particular part.
I could have ordered the part for less through an appliance supply store locally, but they did not offer any return option on electronics. I ordered through Appliance Parts Pros and they were very prompt in their delivery.
I am thrilled to say...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400832
Mounting screw for securing trim, hinges, drawer guides, and interior components. Replace if missing, stripped, or broken during repair or maintenance.
Do-It-Yourself Stories from Customers like You
The right front drawer support/guide was broken off Kenneth P. • Albany , OR • March 10, 2019
The replacement part was identical, arrived quickly as promised, and took only a couple of minutes to install. Excellent service. Very happy with the end result and the whole process.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9760229
This spark electrode mounts at the bake burner and creates the ignition spark to light the oven flame. Replacing a worn or cracked electrode restores fast, reliable bake ignition and consistent oven temperatures.
- Generates a high-voltage spark to ignite gas at the bake burner
- Helps correct symptoms such as no heat on Bake, repeated clicking without ignition, or intermittent bake heating
- Wear, contamination, cracks, or misalignment of the tip can prevent proper ignition
- Restores dependable oven lighting and reduces delayed ignition
What's included: One bake burner spark electrode Install notes:
- Disconnect power and shut off gas supply before servicing
- Remove oven racks, oven bottom panel, and flame spreader to access the bake burner area
- Note wire routing and electrode position; transfer any bracket as needed and secure the new electrode
- Align the electrode tip close to the burner, then restore power and test ignition
Do-It-Yourself Stories from Customers like You
Oven wasn't preheating Paul W. • Jersey City , NJ • January 25, 2015
Had a repair person come into my home and he suggested a different ($200) part, labor would have been another $125. Seeing that it would cost almost $400 fix it, we were just going to buy a new oven. The next day, I called Appliancepartpros and spoke to someone from their support. I explained the symptoms and they suggested this $50 part and told me that I could return it, even if it didn't work. Figured I had nothing to lose. Based on the diagram they sent, I was able to fix the oven (I'm...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10491987
This foam seal fits between mating parts to create a tight barrier that helps prevent leaks and rattling. Replacing a worn or missing seal restores proper sealing and helps keep your appliance running quietly. What it does:
- Creates a compliant gasket between components to limit air or moisture passage
- Helps dampen vibration and reduce rattling/buzzing where parts meet
- Helps maintain proper airflow or fluid routing as designed
- Typical symptoms include leaks, condensation/frost near a joint, or new vibration noises
What's included:
Install notes:
- Disconnect power; turn off the water supply before service
- Note the original seal's routing/orientation before removal
- Clean and dry all mating surfaces; remove old foam and residue
- Install without stretching or over-compressing; ensure even contact with no gaps
Do-It-Yourself Stories from Customers like You
Upper cooling blower was making loud noise no error code Raymond M. • Mundelein , IL • February 06, 2016
I have a 10 year old Kitchenaid double oven with warming drawer below and electrical connection is located in cabinet below. I order a service manual from http://www.allrepairmanuals.com. If you have the service manual follow it, it walks a technician thru each step. If you don't have a manual here are a few highlights. Disclaimer the following is for my oven model KEBS208DBL8, your oven service steps may vary.
IMPORTANT! First step turn-off the power to the oven (mine was a 40 amp breaker)...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10406797
Burner head for gas ranges and cooktops. Distributes gas evenly to create a proper flame. Replace if cracked, damaged, or clogged with buildup.
Do-It-Yourself Stories from Customers like You
Needed new burner heads & orifices Kyle W. • Lansing , MI • February 19, 2017
In an attempt to clean the range from the grease-gunk build-up, I had to remove the burner heads. Unfortunately, the 2 most used burner heads had immovable screws that locked them into the orifices underneath. After numerous hours in attempts to salvage the old burner heads and orifices attempting to remove the immovable screws, I gave up. Checked Maytag's website for parts and found nothing. Turned to AppliancePartsPros.com and found the correct parts for reasonable price in a matter of...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10794022
This fan motor powers the cooling fan that moves air through your unit. Replacing a worn or noisy motor restores proper airflow to help maintain stable temperatures and reliable performance. What it does:
- Drives the fan blade to circulate air for cooling and temperature control
- Helps prevent component overheating caused by weak or stalled airflow
- Fixes: fan not running or starting intermittently
- Fixes: loud humming, grinding, or rattling from the fan area
- Fixes: longer run times or warm spots due to poor airflow
What's included:
Install notes:
- Disconnect power before servicing; allow moving parts to stop
- Note wire positions and motor orientation; take a photo for reference
- Transfer the existing fan blade and mounting hardware as needed
- After install, ensure the fan spins freely and no wiring contacts moving parts before restoring power
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
- Fastens panels, brackets, covers, or internal parts to the chassis or frame
- Helps maintain alignment and support, reducing rattle, vibration, or looseness
- Replaces missing or damaged screws that have backed out, broken, or stripped
- Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supplies before servicing
- Use the correct driver; start threads by hand to avoid cross-threading
- Match length and thread to the original location; do not substitute with longer hardware
- Tighten snugly; do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11684512
The Screw is an OEM replacement part for Whirlpool ranges. This screw is used to secure various components of the range, ensuring that parts such as panels, brackets, or burners remain firmly in place during operation. It is designed to withstand the high-heat environment of a range, providing long-lasting durability.
Symptoms of a bad or missing Screw include:
- Loose or misaligned range components
- Rattling or unusual noises during operation
- Difficulty maintaining the range's structural stability
Causes of a failing or missing screw can include normal wear over time, accidental loss during maintenance or repairs, or damage from overtightening. Replacing faulty screws ensures the appliance remains safe and functional.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken dryer baffles Ann B. • Bridgeport , NY • September 20, 2014
I am a 78year old woman and 40 years ago I replaced the belt on a dryer but could not even consider such a feat today. I ordered the parts from you on line and also found the video that you very nicely have attached to the site and I saved this under my favorites. The baffles arrived within 3 days and due to my age was unaware that dryers now come in two sizes and the ones I ordered were for the smaller but same model. I worked with a very nice customer service agent on line who got me the...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9757706
Inner glass pane for oven door window. Installs inside the door frame. Replace if shattered, cracked, or broken to restore safe viewing and thermal insulation.
Do-It-Yourself Stories from Customers like You
Inner glass door shattered! Bethany H. • Seneca Falls , NY • September 21, 2015
Called up AppliancePartsPros and ordered the part. My husband took the oven door apart and had it replaced within 15 minutes.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10338795
This is a replacement surface grate kit for select gas cooktops and ranges. It restores a stable, level cooking surface when the original grates are worn, cracked, or discolored, helping cookware sit securely over the burners.
- Supports pots and pans over the surface burners for proper heating
- Provides a stable, level cooking platform to reduce rocking or wobble
- Common replacement for cracked, chipped, warped, or heavily discolored grates
- Helps when grates no longer sit flat or align properly on the cooktop
What's included: Cooktop/range surface grate kit in black finish Install notes:
- Turn all burners off and allow the appliance to cool completely before handling grates
- Lift off and remove old grates; clean the cooktop surface around the burner area
- Set new grates in place, aligning feet/locator tabs so they sit flat and secure
- Verify burner caps are seated correctly and cookware sits level before use
Do-It-Yourself Stories from Customers like You
Broken gas range grate Alison W. • Albuquerque , NM • February 28, 2020
Ordered a new grate kit.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10406243
Auxiliary burner head for gas ranges and cooktops. Mounts over the orifice to distribute gas through precision ports. Replace if clogged or damaged.
More