Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Blender won't blend or makes grinding noise? A worn drive coupler is often the cause. This motor-to-blade connector takes 5-10 minutes to replace.
Replacement took only a few seconds after the old part was removed followinf the instructions in the video. Part arrived as promised in two days. Read more
Connects the blender motor to the blade assembly. Replace if stripped, cracked, or worn from overloading or blending hard ingredients without liquid.
Most of the instructions you find online are for a different type of coupler that pops off. This model is different, as the coupler unscrews. I found a video for this specific model blender and I'll summarize below: Turn the blender over so the bottom of the blender is facing up You have to pop the bottom rubber feet off. Take off the four screws on the bottom of the blender Lift the bottom of the blender up and off. This may take two people. You'll need a heavy duty wrench under... Read more
Rubber foot for stand mixers. Installs at the base to provide stability. Replace if worn, cracked, missing, or damaged to prevent mixer movement.
Checked out You tube video. Easy tune up. One gasket was damaged and I did not notice that the brush holders has no brushes. I believe a quick call to Appliance parts pros will fix this, besides I need a few more parts. I expect to get another 20+ years from this KitchenAide mixer, once repairs are competed. Watch out for the single lock washer located on the rear upper housing screw, you don't want to lose this! Read more
Replace your cracked or leaking 60-oz blender jar to restore safe blending. Includes blade assembly for secure mixing. Confirm fit with your model.
My daughter decided to use the blender and forgot to lock the jar in place and ground all the teeth on the coupler and the the jar assembly down to nothing. I went looking on how to fix it and found a repair video. The video sent me to your site. I bought the parts and replaced them, and for a fraction of what it would cost to replace the blender, I have a brand newish working perfectly blender! Thanks! Read more
The Lock Jar is an OEM replacement part for Whirlpool Blenders. Securing the blending jar safely during operation, the lock enables smoothie and food preparation. Causes of a faulty blender locking jar include normal wear of locking tabs and ridges that hold the jar in place through years of use. Exposure to liquid residue over time may potentially compromise lock performance. Symptoms of a bad locking jar include:
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
1. Remove Coupler by tapping it clockwise (lose), then flipped blender over 2. Remove 4 screws holding base, once inside 3. Remove 4 more screws holding Lock-jar, 2 of those screws have spring with a washer, remove broken Lock-jar. 4. installation of new parts is the reverse steps. Note: At the end, Hand-screw Coupler Counter clock wise (Tight) last, install Assy-Jar properly, and Turn on blender to test. Happy Blendings days. Read more
This drive coupling connects the motor shaft to the blender jar. Replace if worn, stripped, or cracked to restore proper blade rotation and function.
Just ordered blender jar coupler and blender motor coupling and now works fine and like new. Read more
This 8-32 x 5/8 screw replaces missing or damaged hardware specified by the manufacturer to secure panels, brackets, and internal components in your appliance. Restores a tight, rattle-free fit to help prevent vibration and misalignment.
I purchased a replacement assembly from Appliancepartspluspro.com Upon inspection of new part I noticed there were only 6 terminals for the 8 wires I needed to connect. After much investigation by their tech support person Ali, it became apparent that my old part was discontinued and no longer available. The new part was the correct replacement but now I had to figure out what to do with the 2 extra wires. I labeled all of the wires and the terminals on the the old part. After moving wires, one... Read more
Seals the motor shaft opening to prevent liquids from entering the housing. Replace if you notice leaks or moisture around the base. Verify fit with your model.
6-20 screw secures panels, brackets, and internal components. Replace stripped, missing, or damaged screws to restore proper fit and eliminate rattling.
Ordered a kit with new belt, rollers and idler pulley. Used instructions in kit, YouTube videos and instructions I found under the console of the dryer. Found that the idler pulley had frozen and that the belt was nearly worn through. Repair it self was not difficult. The problem I had was in hooking the new belt around the idler pulley. It was solved by removing the one screw holding the air discharge tube and sliding the tube rearwards. This allowed me to get my arm in behind the idler pulley... Read more
Screw: 8-16 x 3/8 inch.
Blender won't spin or makes grinding noise? The drive coupling connects your blender jar to the motor. Wears out from repeated use. Easy DIY fix.
Factory replacement jar for select small appliances. It restores a clean, intact vessel for everyday use, helping prevent leaks and spills when the original container is cracked, chipped, warped, or missing. What it does:
I ordered a new jar, now my blender is working again! Read more
Replacement shim spacer that restores correct spacing between blender components. Needed when original is worn, missing, or damaged during disassembly.
Seals the blender jar base to prevent leaks during blending. Replace if you notice liquid leaking from the bottom. Confirm fit with your model number.
Ordered part and followed video help on how to install. It went smooth. I am not repair oriented butit was easy. Read more
Usually ships within 4 - 14 days
Complete dome and blade assembly for your blender jar. Includes protective dome cover and cutting blade. Replace if cracked, leaking, or blades worn down.
Got online, found AppliancePartsPros.com, watched the video on how to change the coupler, ordered the parts, received them in TWO days, and brought it back to nearly new condition! Oh, utilized the Live Chat in the parts department to ensure that I was ordering the correct part/s... So fast and Dannielle was ultra professional in helping... That was EASY! Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.