Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Screw is an OEM part for Whirlpool refrigerators. This screw plays a small but important structural role, securely fastening the refrigerator door hinges in place.
Causes of a bad screw include normal wear and tear, repeated door opening/closing stress, or accidental damage during cleaning or servicing of the hinge area.
Symptoms of a bad hinge screw include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
This thermostat regulates the internal temperature of the refrigerator by cycling the compressor on and off based on the temperature setting. It connects to the temperature control dial or knob inside the fresh food compartment. Replace it if the refrigerator runs constantly, doesn't run at all, freezes food in the fresh food section, or fails to maintain the correct temperature.
Very easy when you get the right part Read more
White plastic cap that secures the water filter in place. Replace if cracked, broken, or missing to properly hold your refrigerator's filter cartridge.
Replaced with new one from your website. I love the website because it shows you how to fix your problem before you get started. I Read more
Refrigerator not cooling evenly or warm spots in fresh food section? A broken air baffle disrupts airflow from freezer. Restores proper temperature control.
Replacement screw for securing panels, brackets, and internal components. Replaces missing, stripped, or damaged fasteners to restore proper fit.
Replaced door latch and switch. Parts are plastic so you must know what you are doing to avoid breaking new parts. Videos were hard to find for my model - eventually I found a video that addressed a different problem but required disassembly of a washer cabinet similar to mine. I removed the control panel using a putty knife and unplugged the wire to the latch switch. Then I remove 3 screws securing the washer's top panel to the back panel. Using a rubber mallet, I gently knocked the top panel... Read more
Ice maker not producing cubes or freezing up? This assembly automatically freezes water and ejects ice on a controlled cycle, restoring consistent ice.
Ice cubes jamming or hanging up in the ice maker? This stripper arm guides cubes off ejector fingers into the bin. Requires removing ice maker to install.
Removed icemaker and inserted the part Read more
Refrigerator not cooling properly? A clogged filter drier prevents proper refrigerant flow. Requires professional installation due to sealed system.
Ordered new Evaporator part and Drier from Appliance Pros. The part arrived earlier than expected and was properly packaged. I had both parts installed by a professional as they required a level of expertise above my capabilities. Works perfectly. Read more
This is a rubber gasket that seals the connection between the water fill tube and the ice maker assembly inside the freezer compartment. It prevents water from leaking around the fill tube during the ice maker's fill cycle. Replace this gasket if you notice water dripping or ice buildup around the fill tube area, or if water is leaking onto the freezer floor during ice production.
I ordered the repair parts that Lowes said they couldn't get. I got the parts very fast and only took 5 minutes to get the job done. Read more
Fixes ice buildup in freezer and reduced cooling. This bi-metal defrost thermostat monitors evaporator temperature. DIY-friendly repair, about 20 minutes.
Changed out the Bimeti - Def, or defrost thermostat. Super easy repair, took about 20 minutes total. So far it seems to have fixed it. Fingers crossed! Read more
Size: 1/4 inch hex head, 10-12 x 1/2 inch.
This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy! Read more
Replace cracked or missing compression fitting inserts for 1/4-inch water tubing in refrigerators and ice makers. Prevents leaks at connections.
If your refrigerator isn't staying at the right temperature or runs too warm, the thermistor may have failed. This sensor monitors compartment temps.
First I did the obvious: Changed the evaporator fan motor and condenser fan motor. Then I realized there was too little air flow from the freezer to the refrigerator, so I replaced the air baffle assembly. Now everything works again. This should have been a piece of cake, but in the 48" Kitchenaid side-by-side built-in, the baffle assembly is mounted on the side wall of the refrigerator rather than the back wall as the video showed. That means the hole for the rear of the two screws holding... Read more
Fridge not cooling but lights work? This compressor overload stops overheating and prevents startup damage. DIY-friendly repair in about 1 hour.
Replaced overload switch and start relay with convenient repair set.Video available on website that gave step by step instructions. Followed the video steps for removal and installation.... plugged in the refrigerator compressor started up everything cool in minutes Read more
Fix a warm freezer or incorrect fan speed with this evaporator fan motor assembly. DIY-friendly repair requiring basic tools and shelf removal.
16 yr old 42" Kitchenaid Superba KSSP42QKS00 built-in side by side. Freezer not cooling properly (+9 to 18 degrees and refrigerator +32 to +44 degrees). Ran the diag and the evap fan showed code 02 (fan on, but at incorrect speed) all other modules showed code 01 for working properly. So bought the evap fan replacement kit from AppliancePro who as usual had the best price and support. Swapping out the fan was easy: take all the freezer shelves out, take two of the drawer guides out, two... Read more
Type AB #8-18 x 5/8 inch thread-forming screw secures panels and components in appliances. Replace missing, stripped, or corroded fasteners.
It was very easy to fix after watching your video.. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.