Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Horizontal metal rod that secures glass shelf panels inside your refrigerator door. Replace if broken, bent, or missing to prevent shelf slippage.
Cut piece to fit Read more
Ice maker not making ice or making small cubes? The water inlet valve controls water flow to your ice maker and dispenser. DIY repair in 20 minutes.
Appliance Parts Pros Helped me diagnose the problem. Helped me find the part. The part arrived before the estimated arrival date. I followed the step by step directions and tips on there instruction video. 20 minutes later I have a working refrigerator. Thanks APP I won't hesitate to do this again! Read more
Replacement door shelf bin for refrigerator. Installs on door to organize condiments and small items. Replace if cracked, broken, or worn from use.
Since it was one week before Christmas I thought it a good idea to clean the refrigerator before loading it up for the holiday. However once I was done, I found one shelf frame had cracked,which we super glued. But the deli drawer support was not able to go back in. So I scrambled online to find a solution. Your website was so helpful with the pictures and prior questions and answers that I felt confident I was ordering the right parts. Even ordered a door shelf that had cracked a while... Read more
Ice won't dispense or auger not turning? This drive shaft holder secures the ice maker shaft for proper rotation. Easy 10-minute DIY fix with video guide.
My refrigerator was not dispensing ice. I could hear the motor activating but noticed the ice auger was not turning. My old drive shaft was stripped on both ends. Video was very helpful and it was an easy fix for someone with little handyman experience. Received my order much faster than expected! The parts arrived the next day and paid for the standard shipping charge. I live in Texas. Read more
The Door Closure Cam is an OEM replacement part for Whirlpool refrigerators. It is a small lever located inside refrigerator doors that engages the latch bolt when closing. The closure cam ensures doors are securely fastened shut to maintain optimal cooling temperatures. Causes of a bad closure cam can include worn or loose mounting points preventing engagement, cracked or broken lever components, or door latch mechanisms that inhibit full closure. Symptoms of a bad door closure cam include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models
Replaced all the parts ordered and adjusted door. Took about one hour to complete. Read more
Replacement door bin for side-by-side refrigerators. Installs on the refrigerator door for condiment and snack storage. Order if cracked or broken.
We ordered an extra shelf for a brand new refrigerator. Price was fair, and delivery was very quick. We're happy customers. Thank you. Read more
Secures water filter for proper filtration and flow to dispenser or ice maker. Replace if cracked, leaking, or filter won't seat properly. Verify fit.
Replaced the old housing with new water filter housing. Read more
Fix a refrigerator that's not cooling properly with this condenser fan motor. Replaces worn motors causing poor heat exchange. Video guide included.
Replaced fan motor Read more
This coupling sleeve connects and protects the drive shaft that powers your appliance's auger or rotating mechanism. It provides a flexible connection that absorbs vibration while transferring rotational power between shaft sections. Replace this coupling if you hear grinding noises, experience reduced performance, or if the auger stops turning completely.
Added a new shaft as the old shaft had worn down...........works perfect now. Thank you Easy fix ....no more than 10 mins. Read more
Ice maker stopped working or leaking water into freezer? This complete ice maker assembly restores automatic ice production. Moderate DIY install.
Replaced entire ice maker. A couple of important points. (1) The ice maker module does not include all parts. The door flap for example is not included. So save all plastic parts from the old unit including screws. The biggest installation problem was the power cable. There was little room on the side of the ice maker for the cable and connectors to fit. Make sure the connector that mates with the refrigerator cable is seated onto the plastic housing and does not stick out or dangle out.... Read more
Factory screw secures panels, brackets, and internal components in refrigerators and freezers. Replace missing, rusted, or stripped screws for secure fit.
Found the parts in the diagram of my fridge and simply installed it very easy Read more
Encloses the water filter to ensure proper flow and filtration. Replace if cracked, leaking when filter is removed, or causing water hammer. Confirm fit.
The video was very helpful, but my KitchenAid model required slightly more steps. Only the two screws in front held the filter housing, same as the video shows, but it has to be removed from the rear. My model did not have the wire brace, only the two front screws held the housing. Shut the water off and pull the electrical plug. Remove the two screws holding the filter housing in the front. Remove the lower panel in the rear at the bottom of the refrigerator. Remove the two screws holding the... Read more
Cracked or missing ice maker cover exposing internal components? This protective cover shields the ice maker assembly. Simple DIY install in minutes.
Replaced icemaker and shutoff arm. Easy project. Read more
Fix frost buildup, condensation, or drips around your ice dispenser. This gasket seals the chute to keep warm air out. Easy DIY install with video guide.
Remove and replaced the auger motor, shaft seal, and the chute seal. No problem. However, the causing failure was to broken wire on the bottom of the freezer door. Loom and blue wire were cut, due to being pinched. I had current to start with and the auger worked three times then quit. That's when I really had to start searching . Fun. Read more
Refrigerator light won't turn on? This light socket kit restores interior lighting when bulbs won't work. Simple DIY repair with video guide.
I saw your video on you tube and it seems very easy to do it my self, so I ordered the parts and I did it my self. It was very easy. Thank you for sharing with us on how to did it. One more thing, the parts arrived on the time they said it would come. Read more
Ice maker stopped making ice or won't turn off? This ice level control board monitors bin levels to control ice production. Simple DIY repair.
Bought new optic control boards, both the emitter and the receiver. The repair process was so simple. The KitchenAid repair tech came out to diagnose our issue. He was only going to come back and install a new emitter. They wanted a lot of money to do the repair. They were going to charge us $257 just for the part (emitter board). We bought both boards for $300 from AppliancePartsPros. We decided to replace both boards, because if one went bad the other might not be far behind. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.