Ksf85600bo Parts

Disconnect the housing carefully from water line (push and release) and replace with new parts Read more

I replaced the Ice Dispenser Lever. Since the replacement part is only available in white and my fridge is bone, I replaced also the Water Dispenser Lever, so it looks much better. I followed the instructions in the video, which were very useful and very well done. My problem was that the refrigerator is a KitchenAid built-in, while the instructions were for a Whirlpool, so the removal of the faceplate was quite different from what was shown in the video and more difficult. Also there were some... Read more

I looked up why the door was not staying shut. I watched a Youtube video and found it was an easy repair and a few dollars in parts from AppliancePartsPros.com. I had previously bought parts from here, are reasonably priced, and they come in quick. I changed the door parts in 1/2 an hour and it was working great. Saved me from buying a new refrigerator. Go for the express shipping. For my purchase it was a dollar cheaper than standard. Read more

Replaced with new one and followed the instruction from the video that is on the order Read more

Watched the video on how to replace. Ordered new roller, which was delivered in just a couple of days. Since the roller had broke, I was unable to roll out the refrigerator, so I tilted the refrigerator back and placed a small furniture slider under the roller frame to prevent gouging the wood floor. Then it was easy to slide out the refrigerator and replaced the roller as explained on the video. I had ordered a pin and bolt, just in case I would need to replace, but didn't need them. ... Read more

I bought an extra refrigerator door shelf, a glass shelf, and 2 glass shelves for the freezer for extra storage. It is great to not have things fall out of the freezer and to not be able to things in the refrigerator. Organization is a wonderful thing. Read more

Replaced the ice maker. The kit came with everything I needed to replace the ice maker. Parts that did not come with the kit were re-used from the old one. My Whirlpool refrig/freezer is an older model so the wiring harness that came with the kit was different from my existing. So instead of disconnecting the ice maker wiring harness from the freezer, I had to disconnect the harness at the ice maker. That was a b..... Anyway after about 20 minutes, finally unhooked the connector. I had... Read more

A YouTube video: https://www.youtube.com/watch?v=jIdtNdDXFDk , by a professional appliance repair company described replacement of the freezer drain pipe with Kenmore's (by Whirlpool) revised drain pipe. Ice buildup inside the freezer was caused by warm air beneath the freezer contacting cold air from inside the freezer the resulting condensation freezing and blocking the drain, causing the ice buildup inside. The revised drain tube functions as a p-trap to prevent cold/warm air interaction.... Read more

I don’t think I needed the capacitor and relay, but while I was at it I figured I would. Originally we found we had an issue when water cane out of the ice maker. The freezer was hovering around freezing and the refrigerator was about 33 deg. I unplugged the refrigerator and it came back on and ran about a day. The next night, same thing. This time cycling power did not seem to help. Removing the rear cover where the control board was and moving it around allowed it to turn on next time I... Read more

Ordered part from AppliancePartsPros.com and received it 2 days later. Put the part in, fit like a glove, water and ice cube maker working flawlessly again with no leaks. Thanks. Read more

Rather than fighting the set screw, I ordered a new handle and extra parts to fix it. My father taught me to use anti seize which I used on all the threaded materials. Appliance parts and all the parts listed easy to see and Order Read more

• Freezer section too warm
• Won't start

After running some tests I determined that the problem was a bad defrost timer. The timer would occasionally fail to trigger the compressor to restart at the end of the defrost cycle. Since I had the unit taken apart, I replaced the termination t-stat and the compressor start relay at the same time. Parts came quick 1.5 days, job completed and the unit is up and running. Read more

Replaced both sets of door cams on my Kenmore Elite Refrigerator. The most important thing to know is that you DO NOT have to remove the doors from the refrigerator to replace BOTH sets of cams. You just have to remove the lower grill which is a snap fit (I also turned off the water and unplugged the unit). My fridge has an ice and water dispenser where the water and electrical lines go through the cams on the left side. Be sure to order the correct parts as the cam holes on the freezer side... Read more

Replaced the tube. The original part number could not be found. This tube that we ordered had an curved connector at the bottom and a hard connector on top. The original tube had a right angle connector on the bottom and a smaller connector on the the top. The curve on the bottom worked. We had to cut the top connector off the tube for it to fit. We then secured it with the original metal bracket at the top. No leaks! All working fine now. Read more