Need Help?
Call
Replace your worn dough hook if yeast dough isn't kneading properly or sticks to the attachment. Non-stick coating ensures smooth mixing and easy cleanup.
I followed the online tutorials, there are many....replaced the PLASTIC part that had worn out Part #: AP4325266 (241764), and also the roll pin, Part #: AP3038054 (9703442) that held it in place with the handle. THIS IS THE HARDEST part of the entire repair, pounding out the roll pin and pounding it back in. A special tool should probably be used for this. I had a small specialized driver bit that "fit" for the job, so I abused it. Probably didn't need to BUY a NEW roll pin, ( it HAS be... Read more
Replacement power cord for stand mixers. Connects your mixer to the wall outlet. Replace if frayed, heat-damaged, cracked, or loose for safe operation.
Took it apart after watching a YouTube video and fixed it with no issues. Works as good as new now Read more
Fix grinding noises and stripped gears in your stand mixer. This pinion drive gear transfers motor power through the gear train for smooth mixing.
REPLACED WORM GEAR AND OTHER GEARS SHOWING WEAR Read more
Machine screw with 10-24 thread fastens motor housing, gearcase, and internal brackets in stand mixers. Replace stripped or missing screws to restore secure assembly and reduce vibration.
Watched a you tube video that covered every detail. Identified the problem, showed how to take mixer apart, confirmed the problem, what parts to order and how to reassemble the mixer eliminating potential issues. Overall this DIY was an A plus. Read more
This is the electronic phase control board that regulates the motor speed in a stand mixer. It adjusts power delivery to the motor based on the speed setting selected by the user. Replace this board if the mixer runs at only one speed, does not respond to speed adjustments, intermittently stops during operation, or fails to turn on entirely.
I replaced the Board-Phas and speed control plate since power was not making it to the motor. When I received the speed control plate it had nuts on the upper screws with springs, since my old one didn't have nuts I assumed that the nuts were to keep the springs on until installed. After putting it back together, I noticed that though it worked, the first two settings did nothing. Now, guys, I was desperate, OK. I downloaded the service manual and read it from front to back, and when I got to... Read more
This planetary drip ring fits around a stand mixer's planetary assembly to cover the gap below the gearcase and help catch grease residue, restoring a clean, finished look where the beater hub meets the mixer head.
This was a problem that I'd had previously with this mixer. The worm gear, which is designed to fail (so that more serious damage does not occur to the motor), did fail while I was mixing some multi-grain bread dough. After the previous failure (pre-youtube days), I took the machine in for repair. The repair-shop cost came to about $150 in labor. Parts were extra. This time, I decided to do the repair myself, since I figured that I knew what was wrong. I found the appliancepartspros... Read more
Color: White
Removed the old planetary and cleaned metal shavings from gears. Transferred the old axle/gear assembly onto the new planetary. Inserted the new (and expensive) screw for the main gear and torqued it very tight (as well as the original other four screws). Slid the new planetary gears together and re-inserted the holding pin. Tapped on the cover ring and was done. Read more
This flat spring restores proper tension and return action in the mechanism it supports. Replace a fatigued or broken spring to bring back crisp movement and keep linked parts aligned so the assembly operates smoothly.
Replaced missing spring and lift part, adjusted brushes and re timed speed control with parts from AppliancePros. Read more
Fix a mixer that won't start or runs intermittently with this brush holder cap. Secures the carbon brush and spring in the motor assembly.
Your training film was a lot of help for me. Thanks!!! Read more
This is the center vertical shaft that sits inside the stand mixer's gear housing and transfers rotational power from the motor to the mixing attachments. It is a metal shaft that supports and drives the planetary gear assembly. Replace this part if the mixer's beater or whisk wobbles excessively, fails to rotate, or if the shaft shows visible wear or damage.
Replaced the center gear and since they sent the hub along I replaced that too just to be safe. Used the live chat before ordering to make sure I was ordering the correct part. The person I chatted with was very nice and very helpful and parts came in good shape, and just as ordered. Replaced the stripped gear the next day and added a bunch of grease and the mixer works like new. Was very impressed with their diagrams and helpful videos as well as their large selection of parts. The other... Read more
The Grey Thumb Screw is an OEM Replacement Part designed for securing attachments on 4.5 and 5 Whirlpool and KitchenAid quart mixers. This screw plays a critical role in ensuring the stable and secure connection of various mixer attachments. With a user-friendly design, it offers easy installation without the need for additional tools. It can be installed by hand-screwing.
Replaced it with ordered part. Read more
Mixer won't run or just hums? Worn motor brushes in the holder cause power loss. This DIY repair restores full motor function on stand mixers.
Checked out You tube video. Easy tune up. One gasket was damaged and I did not notice that the brush holders has no brushes. I believe a quick call to Appliance parts pros will fix this, besides I need a few more parts. I expect to get another 20+ years from this KitchenAide mixer, once repairs are competed. Watch out for the single lock washer located on the rear upper housing screw, you don't want to lose this! Read more
Fastening screw for securing components inside appliances. Replaces lost, stripped, or damaged screws during repairs or part installations.
Bought and installed new hinges. Repair took about an hour but I also cleaned all the glass inside and out on both oven doors. I had ordered extra screws as I read the old ones that hold the hinges were hard to get in as they were self taping but the screw labeled 5 next to the hinge were not the right ones. All old screws worked fine. You just need to put a little power to them to get them started. Easy repair. Read more
This genuine replacement gear is a drivetrain component that transfers motor rotation to a mating mechanism inside your appliance. Replacing a worn or stripped gear restores smooth, reliable motion and helps prevent damage to adjacent parts.
If your mixer makes excessive noise or vibrates during operation, a worn spring seat cap may be the cause. This part centers and secures springs for smooth, quiet performance.
If your stand mixer runs only on high speed or won't change speeds properly, a worn governor drive stud may be the cause. This small repair restores smooth speed control in about 30 minutes.
Replaced speed control parts. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.