Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement tine row for dishwasher upper or lower rack. Holds dishes upright and properly spaced. Replace if tines are rusted, broken, or rotted away.
Just replaced the things. Had to reuse old tine rows, rollers, the spray arm, etc., i.e. I removed 'em from the old racks and put on the new ones, but that was piece of cake. Also, I cleaned the food grinder and the discharge valve compartment (thank you very ???? ???? much, Internet), so spray arms around the top rack get enough water pressure now. I didn't have to buy any parts for the latter part of this little repair project, though. Read more
Supports smooth rotation of the spray arm hub in your dishwasher. Replace if cracked, worn, or broken to restore proper spray arm movement and alignment.
My discharge would not empty after a wash cycle and I always had gross gray water left in the bottom approx 3" deep? After doing the obvious things of checking the simp for garbage, and checking that the discharge hose wasn't blocked, I removed my discharge pump ( not too hard to do) and tested. My pump which did run and turn the impeller. However, the pump evidently had weakened with time and weakened and could no longer pump the waste water up hill to the "T" connection under the sink. A... Read more
Replace cracked or broken dishwasher upper rack wheels. Attaches to the upper dishrack and glides along tracks for smooth loading and unloading access.
I originally ordered this part from the KitchenAid website because I assumed I needed to buy the part directly from them since they manufactured my dishwasher. Five minutes after ordering the part from them, I went on Youtube to see if there was a video instructing on the installation of the upper dishrack wheel since I wanted to make sure I installed it correctly. I saw the AppliancePartsPros.com video related to this part. I then checked the APP website and found the part for $11.00 less.... Read more
Replacement wheel for dishwasher upper rack. Snaps onto rack frame to allow smooth sliding in and out. Needed when wheels crack, break, or dry out.
I watched a video on how to change these. I had ordered one a month ago because one had failed. I had no trouble --less than 30 seconds -- to insert a new for the bad one. Then a few weeks later, a 2nd one failed -- there are 4 of them -- and I figured that I might as well change out the bad one as well as the two "good" original ones. Total time to change out the 3 was less than two minutes and that included getting the rack completely out of the dishwasher...which you have to do in... Read more
Creates a watertight seal between the spray arm and water supply tube. Replace if you notice leaking or poor spray performance during wash cycles.
Replaced the upper spray arm seal Read more
Fix continuous water flow or dishwasher overflow issues. This inlet valve controls water entering your dishwasher. Easy DIY repair with basic tools.
Dishwasher washer would not drain after hearing glass-like particles during the drain cycle despite trying to clean the cylinder filter. Originally suspected the drain motor was damaged. After watching a video on how to replace the drain pump, I carefully energized the dishwasher (from water and electricity) then removed the dishwasher to take a look. After removal of drain hose from the pump, discovered that drain hose was connected to water inlet assembly which also needed removal to... Read more
Fix a dishwasher that won't spray water or makes grinding sounds. This circulation motor pumps water through spray arms. Moderate DIY repair.
My dishwasher was running super loud for several loads but appeared to be cleaning just fine. One day it went from super loud to hardly a sound at all, not even the sound of water. After finding this site I found others with similar issues and it pointed to the Circulation Motor. Normally I wouldn't feel comfortable with pulling the dishwasher out of it's slot and performing this type repair but after watching the video posted along side the pictures of the part it looked pretty easy so I took... Read more
Replacement silverware basket for your dishwasher. Holds utensils and small items during wash cycles. Needed when original is cracked, broken, or worn.
Ordered new basket. BUT NOTE, when model number was put in for the part to determine compatibility, it said it was NOT COMPATIBLE, but it absolutely fit just fine. Read more
Dishwasher not filling with water or leaking when off? The water inlet valve controls flow during wash cycles. DIY repair typically under 30 minutes.
First I cleared the food chopper area. There were things there, bits of plastic for instance, but it wasn't the reason for the dishes not getting sprayed off. The dishwasher continued to only partially fill and not circulate the water. I started the dishwasher, let the pump start and then opened the door and filled up the dishwasher manually. It sprayed water as it should, cleaning the top rack quite well. I figured the issue was not the float switch, since some water was coming in. So I... Read more
Seals the door to tub gap, preventing leaks during wash cycles. Replace if water leaks from the door or seal is torn. Confirm fit by model number.
New door seal did the trick. Read more
Seals the float switch base to prevent leaks during dishwasher operation. Replace if water leaks from below the float assembly. Confirm fit with model.
Ordered 6 parts from you thanks to your fantastic web schematic parts diagram received parts very fast changed parts easily and that leak stopped. Your company is a 5* operation hands down. Read more
Holds utensils and cutlery in the lower rack during wash cycles. Replace if bottom is cracked, broken, has holes, or compartments are damaged or missing.
Bought a new baskit Read more
Dishwasher won't power on or display lights? This thermal fuse kit protects against overheating. Easy 10-minute DIY fix with video instructions.
I first verified the house panel circuit breaker was not tripped. It wasn't so I removed the bottom kick plate of the unit, using a circuit cricket I verified the power feed to the unit was live. The bottom kick plate had a trouble shooting guide in a plastic sleeve which I opened and reviewed. Based on information in there it appeared the TOC was likely the issue. (We recently lost power and used a stand by generator. Previously when we did the the dishwasher had a blinking LED on the... Read more
Replace your cracked, rusted, or broken dishwasher tine row. This adjustable row installs in the upper or lower rack for flexible dish loading.
Order parts and replace. When removing attachments, do them one at a time and install them on new rack as you go. Watch for the small release tabs on the attachments (baskets, rollers and tine holders), "gently" put pressure to release; remember these units have been in hot water and they are brittle. Read more
Replacement door balance spring for dishwashers. Provides tension so the door opens smoothly and stays in position. Needed when spring is rusted, broken, or stretched causing door to slam open or fall without resistance.
I called a local repair center who estimated $300+ to fix this. I bought a door handle and door latch for $~100 and fixed my dishwasher in about 10 mins. I ordered the parts on Sunday, they arrived on Tuesday. Very happy with appliance parts pros and would recommend them. Read more
Reduce noise and prevent heat loss with this dishwasher toe panel insulation. Replace when soiled, damaged, or missing. Adhesive-backed for easy install.
Ordered new insulation from AppliancePartsPros. It was delivered quickly and easy to install. Read more