Kuisi85jbl2 Parts

This was a fairly easy process. 1) Tighten one of the wire ends to a screw and keep the wire as taut as possible while wrapping it through the grid. Brace the grid against a corner wall, or held within a vice (don't over tighten in this instance). 2) Be sure to have the second screw ready to tighten, and again, keep the wire taut as you wrap it around this screw. It may take some re-wrapping to eliminate slack. 3) After the lower wrapped section is complete, repeat for the upper wire... Read more

Ordered new part and replaced it. Read more

Replaced light switch. That did not work, problem was in led lights. Read more

Noticed that some terminals on the wiring harness were corroded and that no water was being pumped over the ice grid. Ice machine did get cold inside the compartment so it was not apparent that the compressor was bad. Ordered a Water Pump (from bin to ice grid) and a new wiring harness. Recirculating pump appeared to be okay. As I am not an experienced service tech (actually a Chemist) logic told me that my chances of success were high (not guaranteed though).. After replacing the parts... Read more

While at my sister's house, she showed me how to access & dismantle the housing unit on her dishwasher, thinking the issue might be from that area. So, when I came home, I opened up my housing unit and found that several of the screws had come out and the pump outlet seal was stretched out and partially outside of the unit itself. I located all of the missing screws & discovered I was still missing one, which my husband helped me order with the pump outlet seal. I easily replaced the old seal... Read more

Ordered new circuit board and water pump. Hired a professional to install them Read more

This tube is very difficult to work with due to its location behind the cold plate. I loosened the two screws on the left, but there's no way to get the screws on the left loose. I cut the hose off of the pipe at the top of the cold plate and slowly worked it out. The new tube comes folded in half, putting a bad crimp in the middle. The easiest way to get rid of the crimp is to pour boiling hot water onto the crimped area and then open up the tube. I didn't do it, but you might want to... Read more

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

Ordered part from AppliancePartsPros.com and received it 2 days later. Put the part in, fit like a glove, water and ice cube maker working flawlessly again with no leaks. Thanks. Read more

Replaced start relay and overload $45 fix. Thank you! Read more

As soon as the parts arrived, installed them seamlessly. Thank you. Read more

I took it out so I could figure out which part I needed. Found it on appliancepartspros.com and ordered it. The amazing thing is I ordered it late Thursday afternoon from IL and I had it the next day without paying the extra for overnight. I figured I would have it by Monday but the very next day this little fedex truck pulls in the drive and the guy hands me a box. Inside is the motor, installed it and before you know it we have ice again and the kids and wife are happy as can be. Which was... Read more

Replaced It With New One Read more

• Leaking

Replaced the tube and the clamp Read more