Lat9806aae Serial15357586sh Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10501250
Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.
Do-It-Yourself Stories from Customers like You
Shift actuator Jesse M. • Nipomo , CA • October 04, 2025
With the video that was made from appliance pro.Help me out one hundred percent to understand what I was dealing with
Read more
More
$24.95
- Compare At:
-
$29.69
- You Save:
-
$4.74
Genuine Whirlpool part
By: Whirlpool
Part Number: 12112425
The Pump and Drive Belt Kit is an OEM replacement part for Whirlpool washing machines. The Pump and drive belt kit is responsible for helping to drain water from the washer drum during the wash cycle. The pump and drive belt kit works by powering the washer's pump to remove water from the drum and out of the washer. The drive belt provides the power to turn the pump, while the pump helps to drain the water. The kit includes 1 pump belt and 1 drive belt.
This part fixes the following symptoms:
- Standing water in the washer drum
- Ineffective or non-existent water drainage
- Potential water damage or flooding caused by a faulty pump or drive belt
Causes of needing to replace the pump and drive belt kit include normal wear and tear over extended use, exposure to debris or foreign objects, or physical damage from impact or mishandling.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.
This part fixes the following symptoms
-
Spins slowly
-
Burning smell
-
Pumps but will not spin
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Maytag clothes washer would not spin or drain Ben M. • Wallingford , CT • September 29, 2018
The washer was on, and I heard a faint humming sound in the laundry room. I went in and opened the washer and it was full of soapy water in the middle of its cycle and was not agitating. I also smelled a faint burning smell.
At this point I figured the problem was a bad motor, as the washer is more than 20 years old. I have fixed it twice before, because the first time, the repairman said I should keep this washer going as long as possible. It was made to last with a metal drum, unlike newer...
Read more
More
$32.64
- Compare At:
-
$44.49
- You Save:
-
$11.85
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820036
The Washer Door Switch is an OEM part for Whirlpool washing machines. This component is crucial for ensuring the washer operates safely by detecting whether the door is open or closed. The door switch prevents the washer from starting or continuing its cycle when the door is open, and it allows the machine to function only when the door is securely closed.
Symptoms of a failing Washer Door Switch include:
- The washer not starting or stopping unexpectedly during a cycle
- Error codes related to door closure issues displayed on the washer's control panel
- The washer door not locking properly or the lock mechanism not engaging
- The washer continuing to operate with the door open
Causes of a bad door switch can include wear and tear from frequent use, damage from repeated opening and closing of the door, electrical faults such as short circuits, or physical damage from mishandling or impact.
This OEM Whirlpool part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.
This part fixes the following symptoms
-
Will not drain
-
Pumps but will not spin
-
Timer will not advance
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Sometimes the washer wouldn't start the wash cycle when the fill cycle was done it would just sit until the lid was picked up or bumped Eugene N. • Roswell , NM • August 28, 2016
The lid shut-off switch is located behind the lid How About That. I order the plastic ball the hold the lid in place plus the lid shut off switch. I watched the video that AppliancePartsPros.com has on how to replace the lid and the plastic balls. I removed the lid to get to the two philips head screws to remove that part of the shut-off switch. I took the new switch out of the package and compared it to the old switch. I assembled the switch just like the old switch look using the new...
Read more
More
$22.53
- Compare At:
-
$32.43
- You Save:
-
$9.90
Genuine Whirlpool part
By: Whirlpool
Part Number: 6-2040130
Supports the inner tub for smooth spinning during wash cycles. Replace when you hear grinding noise or see water leaking from bottom center of tub.
Do-It-Yourself Stories from Customers like You
Leakage from tub seal Gabriel S. • Petaluma , CA • March 15, 2015
I ordered the tub seal and stem seal kits along with the much needed spanner wrench. After viewing the video online several times and taking notes along the way I was ready to tackle the repair. After taking everything apart, I cleaned all areas thoroughly then addressed the rusty areas and mineral deposits found in the tub. Soaking the tub in vinegar and baking soda overnight helped loosen the built up deposits enough so I could carefully scrape them off with a spatula. This was very time...
Read more
More
$70.95
- Compare At:
-
$84.43
- You Save:
-
$13.48
Genuine Whirlpool part
By: Whirlpool
Part Number: 203956
Three-pad kit that cushions and stabilizes the wash tub assembly. Replace when pads are worn, compressed, or missing to restore proper vibration dampening.
Do-It-Yourself Stories from Customers like You
May tag washer bumper pads wore out Larry W. • Hookstown , PA • November 18, 2014
I ordered parts from appliance parts pro at 3:30 on Friday and they were delivered at bout noon on Saturday the next day. Took the machine apart removed the old pads. With the directions in the packages put it back together and the wife ran 5 loads of clothes through it. Works great. Was awesome to get the parts so quick
Read more
More
$38.95
- Compare At:
-
$46.35
- You Save:
-
$7.40
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22003441
The OEM Replacement is a bearing designed to function as the rear bearing in Whirlpool front-load washers. It also works as the upper brake bearing in top-load washers. Positioned near the tub's brake assembly, this component plays a significant role in the operation of the washer. In top-load washers, it resides above the brake assembly.
Causes of a bad bearing can include prolonged wear and tear, exposure to excessive loads, or water intrusion that leads to rust and corrosion. A compromised bearing can lead to more significant issues if not addressed promptly.
Symptoms of a bad bearing include:
- Loud, unusual noises during the wash or spin cycles
- Excessive vibration or movement of the washer
- The drum not rotating smoothly or becoming stuck
- Leaks around the drum area
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Noisy spin cycle Gregory E. • Halifax , PA • April 17, 2017
I just wanted to put my experience here for all to see. I have a Maytag Neptune, MAH5500BWW, one of the original ones. I bought it back in 2002 and it has done many many loads of wash faithfully. So when the bearings started to get loud I thought it best to replace them, the seal kit and the belt. I did my research as best I could and decided to order the OEM parts from an appliance supplier. If you are replacing the bearings, watch on line videos prior to performing the job. It will...
Read more
More
$18.23
- Compare At:
-
$21.69
- You Save:
-
$3.46
Genuine Whirlpool part
By: Whirlpool
Part Number: W10841140
High-temperature adhesive secures gaskets, seals, and feet in hot zones. Replace when parts loosen or seals fail. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
My 20 year old maytag washer was knocking durring the wash cycle Dennis K. • Antioch , CA • November 15, 2015
I took the cover off the transmission and determined that the only possible knocking had to be coming from the yoke. I ordered a new yoke and all the tub seals needed to put it back together like new. I also ordered a new drive pulley bearing because this bearing is always turning whenever the washer is used. I cleaned all the parts up while I was waiting for the new parts to arrive. I promised my wife I would make it look like new. I installed all the new parts in one day and let the...
Read more
More
$18.23
- Compare At:
-
$21.69
- You Save:
-
$3.46
Genuine Whirlpool part
By: Whirlpool
Part Number: WP596669
The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.
Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
- Leaks at the hose connection points
- Hoses slipping off the connections
- Visible rust or damage on the clamp
- Reduced appliance efficiency due to leaks
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Will not stop filling with water
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
My washing machine smelt horrible Bryan W. • Ogdensburg , NY • August 20, 2018
First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available....
Read more
More
$7.48
- Compare At:
-
$8.98
- You Save:
-
$1.50
Genuine Whirlpool part
By: Whirlpool
Part Number: WP213045
Connects the washer tub to the drain pump for water drainage. Replace if cracked, leaking, or split. Installs between the tub outlet and pump inlet.
Do-It-Yourself Stories from Customers like You
Leaking water from bottom of washer found hose cracked just below the tub Terry S. • Morgan Hill , CA • April 23, 2014
I replaced the hose between the tub and the pump. The clamp screws were quite rusted but I used a socket wrench on them since they have hex heads in addition to the screwdriver slot. If I had tried to use a screwdriver, I think it would have been difficult. I did not reuse the original clamps but replaced them with hardware store hose clamps.
Read more
More
$46.35
- Compare At:
-
$55.62
- You Save:
-
$9.27
Genuine Whirlpool part
By: Whirlpool
Part Number: 205000
Washer won't spin or spins slowly? This motor mount roller and spring kit restores proper spin performance. Moderately easy DIY repair with video guide.
This part fixes the following symptoms
-
Will not agitate
-
Burning smell
See more...
Do-It-Yourself Stories from Customers like You
Maytag clothes washer would not spin or drain Ben M. • Wallingford , CT • September 29, 2018
The washer was on, and I heard a faint humming sound in the laundry room. I went in and opened the washer and it was full of soapy water in the middle of its cycle and was not agitating. I also smelled a faint burning smell.
At this point I figured the problem was a bad motor, as the washer is more than 20 years old. I have fixed it twice before, because the first time, the repairman said I should keep this washer going as long as possible. It was made to last with a metal drum, unlike newer...
Read more
More
$54.25
- Compare At:
-
$65.10
- You Save:
-
$10.85
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22002360
Water won't shut off or keeps filling when washer is unplugged? Replace the water inlet valve. Easy 30-minute DIY fix for most models. Video available.
This part fixes the following symptoms
-
No hot or cold water
-
Will not fill with water
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
Water wouldn't shut off tub kept filling William M. • Stroudsburg , PA • April 24, 2016
Ordered a new inlet water valve . Super fast delivery ordered on a Wednesday afternoon was here Thursday morning , standard shipping , I was impressed !!
Removed the old valve , installed the new , checked for leaks no issues , washer is back on line and my Honey is very happy with me .
Read more
More
$117.52
- Compare At:
-
$138.67
- You Save:
-
$21.15
Genuine Whirlpool part
By: Whirlpool
Part Number: WP207166
Washer won't start or keeps blowing fuses? The lid check switch ensures your washer only runs when the lid is closed. Easy DIY repair in under 30 minutes.
This part fixes the following symptoms
-
Will not fill with water
-
Will not agitate
See more...
Do-It-Yourself Stories from Customers like You
My washer stopped it just sttoped working Charles T. • Houston , TX • February 01, 2015
First I needed to replaced the timer. However that timer is no longer available. So I was not able to buy that part. A friend encouraged me to cross reference the part number. I did and I found another timer that claimed it would work on my machine. It looked very similar. I got the timer from you guys and put it in. The water valves worked right away but the motor did not. I researched more troubleshooting ideas and discovered I had a bad lid check switch. I got a new one of those from you...
Read more
More
$45.30
- Compare At:
-
$54.36
- You Save:
-
$9.06
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285655
The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.
Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
- Water leaks around the hose connection points
- The hose slipping off the fitting
- Visible rust or wear on the clamp
- Difficulty in tightening the clamp to secure the hose
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Syphonbreak was leaking James O. • Bryant , AL • September 04, 2015
We ordered parts from appliance parts pros and I fixed it.
Read more
More
$9.63
- Compare At:
-
$11.46
- You Save:
-
$1.83
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001659
The Timer Knob is an OEM replacement part for Whirlpool dryers. It allows users to set cycle durations with smooth, intuitive adjustment.
Symptoms of a faulty timer knob include:
- The timer knob does not turn or is difficult to turn.
- The timer knob is missing
Causes of a bad timer knob can include loose or stripped internal gears from an extended operation or impact damage during loading/unloading clothes.
Note: This is the center portion of the knob only. For the complete knob assembly, the cap and skirt must also be purchased.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Doesn't shut off
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Broken knob James G. • Decatur , IL • November 16, 2014
It's working now
Read more
More
$29.48
- Compare At:
-
$34.79
- You Save:
-
$5.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001619
Washer overflowing or not filling properly? A clogged or cracked pressure switch hose prevents proper water level detection. Simple 15-minute DIY fix.
This part fixes the following symptoms
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
Washer overflowed Richard M. • Robinson , IL • September 04, 2015
Replaced the pressure switch which only took about 15 minutes ,was a very simple operation.
tube air was backordered till 10/16/15 so checked it and found it with gunk in it ,so cleaned it out and washer works fine. can cancel tube air as i will not need now
thanks for information on what part to order was very helpful
Read more
More
$69.95
- Compare At:
-
$83.94
- You Save:
-
$13.99
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001908
Fixes washer that won't agitate, spin, or start. If your washer stops mid-cycle or won't run with lid closed, this lid switch kit restores operation.
This part fixes the following symptoms
-
Will not fill with water
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Washer would not turn on Anthony W. • Washington , DC • October 23, 2014
No water, no electricity, nothing happened when I pulled the on knob. I replaced the lid switch. The switch arrived at my house super fast - ordered on Friday and was there on Saturday. The whole replacement process took no time at all.
Read more
More
$46.35
- Compare At:
-
$55.62
- You Save:
-
$9.27