Lde9608acm Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Dryer Thermal Fuse

5.0 (21)

By: Whirlpool

Part Number: WP307473

Dryer won't start or heat? A blown thermal fuse cuts all power to protect against overheating. Easy 30-minute DIY fix with multimeter testing.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You Catastrophic failure of the dryer cycling thermostat in a maytag neptune super stack Richard M. • Cornish , NH • October 19, 2020

Through 15 years of vibration, the Cycling Thermostat evidently had degraded to the point where one electrical connection or more came loose and caused a short. There is also a possibility that the Bakelite section of the Dryer Cycling Thermostat body separated from the metal base, simultaneously exposing all four connections to a short. The thermostat literally exploded into chunks and dust. There was a heavy arcing and then, thankfully, the thermal fuse blew and shut down power to the short... Read more

$53.21

Compare At:: $63.85
You Save:: $10.64

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Door Catch Kit

5.0 (22)

By: Whirlpool

Part Number: LA-1003

The Door Catch Kit is an OEM part for Whirlpool dryers. It includes the door catch and the necessary mounting hardware to secure it in place. This kit ensures the dryer door remains securely closed during operation, preventing heat loss and ensuring the appliance functions efficiently.

Causes of a bad door catch include regular wear and tear, physical damage, or misalignment of the door, which can impact the catch's ability to latch properly.

Symptoms of a bad door catch include:

The dryer door not staying closed
Difficulty latching the door shut
The dryer stopping mid-cycle due to the door opening

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Door won't close
Shuts off too soon
Doesn't shut off
Takes too long to dry

Do-It-Yourself Stories from Customers like You Door clip to my dryer broke Richard D. • North Dinwiddie , VA • March 15, 2014

Ordered a new clip and installed it. Easy to do. Unplugged the dryer. Removed the front. It is only held on by two screws. Removed wires to the door switch. removed the female end (it had the broken male piece in it. Inserted the new female part in the front, clipped in the male part into the door and reconnected the door switch wires, screwed the front back on. Job done. Total time was less than 10 minutes. Works like new. Read more

$25.76

Compare At:: $30.91
You Save:: $5.15

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Timer Knob

5.0 (23)

By: Whirlpool

Part Number: WP22001659

The Timer Knob is an OEM replacement part for Whirlpool dryers. It allows users to set cycle durations with smooth, intuitive adjustment.

Symptoms of a faulty timer knob include:

The timer knob does not turn or is difficult to turn.
The timer knob is missing

Causes of a bad timer knob can include loose or stripped internal gears from an extended operation or impact damage during loading/unloading clothes.

Note: This is the center portion of the knob only. For the complete knob assembly, the cap and skirt must also be purchased.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Doesn't shut off
Won't start

Do-It-Yourself Stories from Customers like You Broken knob James G. • Decatur , IL • November 16, 2014

It's working now Read more

$29.48

Compare At:: $34.79
You Save:: $5.31

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Dryer Heating Element Assembly

4.9 (19)

By: Whirlpool

Part Number: WPY308612

Dryer not heating or overheating? This heating element assembly with enclosure and insulators is the likely fix. DIY install in 30 minutes.

Do-It-Yourself Stories from Customers like You Overheating maytag dryer Mike H. • Sammamish , WA • December 31, 2015

Our dryer suddenly began overheating while drying. Outside of the dryer cabinet was uncomfortably warm to the touch, dryer drum was hot, charred smelling laundry. Based on what I read it was likely one of two things - a failed cycling thermostat or a shorted heating element. First I cleaned the vent hose and ducting to ensure good airflow, which I had. I opened the circuit breaker first, then took off the door and front cover. I started with a thorough cleaning of the dryer with a vaccuum... Read more

$178.22

Compare At:: $212.08
You Save:: $33.86

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Dryer Thermal Fuse

4.9 (15)

By: Whirlpool

Part Number: WP306604

Dryer won't heat or start? This thermal fuse cuts power when temperatures get too high. Test with a multimeter for continuity. Easy DIY repair.

This part fixes the following symptoms

Won't start
No heat or not enough heat

Do-It-Yourself Stories from Customers like You Maytag gas dryer was not heating Christopher P. • Los Angeles , CA • October 04, 2014

Did some dryer repair research (dryer not heating) on the internet. Bought an ohm meter, opened up the dryer and tested the cut-off-T, high limit thermostat, dryer igniter, flame sensor, cycling thermostat for continuity. The igniter was bad, the other parts tested ok. Went online to AppliancePartsPros.com searched for a new igniter for my specific dryer model, found the right replacement igniter and watched the video on how to replace the igniter. Because my dryer is old (15+ years) and I... Read more

$29.48

Compare At:: $35.38
You Save:: $5.90

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.6 (8)

By: Whirlpool

Part Number: WP90767

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

Loose or wobbly components within the appliance
Panels or parts that are not securely attached
Rattling or unusual noises due to loose parts
Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Certain buttons were'not working Brent T. • Easton , MD • November 17, 2014

One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more

$7.48

Compare At:: $8.90
You Save:: $1.42

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Timer Knob Insert

5.0 (20)

By: Whirlpool

Part Number: WP22001664

The Timer Knob Insert is an OEM replacement part for Whirlpool dryers. This is a cap located on the timer knob on the control panel. Color: White. This is the timer knob cap only. For the complete assembly, you must also order the knob and skirt.

Causes of timer knob Insert failure can include cracked plastic from years of repeated turning motions. Wear on components also occurs due to extensive lifetime usage cycles.

Symptoms of a faulty timer knob insert include:

Knob becomes loose, detached or inoperable for timings scrolling
Cracks appear exposing internal timer parts

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

Do-It-Yourself Stories from Customers like You Broken knob James G. • Decatur , IL • November 16, 2014

It's working now Read more

$9.63

Compare At:: $11.56
You Save:: $1.93

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Hex Nut

4.9 (20)

By: Whirlpool

Part Number: WP33001443

This Hex Nut is a small but critical fastener used to secure brackets, panels, and internal assemblies in your appliance. Replacing a stripped, corroded, or missing nut restores a tight, rattle-free, and safe installation.

Threads onto a matching bolt or stud to clamp parts together
Helps maintain alignment and reduce vibration-related loosening
Commonly used on panels, brackets, supports, and internal assemblies
Replace when threads are damaged, hex flats are rounded, or hardware is missing
Symptoms can include loose or rattling components or hardware that won't stay tight

What's included: One hex nut. Install notes:

Disconnect power and, if applicable, shut off gas or water before servicing
Use the correct-size nut driver or wrench to avoid rounding the hex
Start the nut by hand to prevent cross-threading; tighten snugly without over-torquing
Inspect and replace any damaged mating bolt/stud or washer for a secure repair

Do-It-Yourself Stories from Customers like You The rollers needed to be replaced, the axles for the rollers needed to be replaced, the tension pulley roller needed to be replaced, the belt needed to be replaced Richard G. • El Paso , TX • December 18, 2018

It took me about 2 hours to take everything apart and get it back together & running again with no problems. All the parts I ordered were exactly what I needed to fix everything. Thank you all !!! Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Appliance Fastener Screw

4.6 (13)

By: Whirlpool

Part Number: WPY014874

Factory fastener screw secures panels, brackets, and trim inside appliances. Replace missing, stripped, or damaged screws to restore tight fit.

Do-It-Yourself Stories from Customers like You Loud squealing noise William B. • Rocky Mount , NC • December 17, 2018

First replaced the drum rollers...that wasn't it..took dryer back apart and spun the belt tension wheel by hand (should have done this the first time I took the dryer apart) and it squeaked. so I ordered the full parts: wheel, idler arm, idler spring, arm sleeve, E ring..Put it back together and whoa..no more squealing!! Read more

$5.95

Compare At:: $7.02
You Save:: $1.07

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Light Bulb

4.7 (21)

By: Whirlpool

Part Number: W10857122

The Light Bulb is an OEM part for Whirlpool refrigerators. This part illuminates the water and ice dispenser area, providing visibility and ease of use, especially in low light conditions.

Over time, the light bulb can fail due to normal wear and tear, electrical surges, or damage from vibrations and impacts.

Symptoms of a bad light bulb include:

The dispenser area not lighting up when activated
Flickering or dim lighting
The bulb failing to turn on consistently

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You My dryer was making noise James M. • Middletown , RI • September 19, 2014

I went on line and purchased all of the possible parts that could be worn out. I spent less than the service guy wanted to show up...The online videos were spot on. Two hours and it works like new! One of the best values on the Internet! Read more

$13.47

Compare At:: $16.03
You Save:: $2.56

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Dryer Heating Element Assembly

4.9 (23)

By: Whirlpool

Part Number: WP307178

Dryer not heating or producing warm air? This heating element assembly often solves no-heat issues. DIY-friendly repair, typically 10-20 minutes.

Do-It-Yourself Stories from Customers like You Would not heat Chris A. • Saint Joseph , IL • January 04, 2017

I figured there could only be a couple reasons why the dryer would not heat so I did some research. I read where you could test for continuity on the parts to determine which one was bad. A friend referred me to this site, I looked up the part for my particular model, ordered and replaced the part. It could not have been any easier. I will come back to this site with my future appliance parts needs for sure! Read more

$176.38

Compare At:: $209.89
You Save:: $33.51

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Internal-Bias Thermostat (Dryer)

5.0 (6)

By: Whirlpool

Part Number: WP3387137

This internal-bias thermostat regulates dryer drum temperature by cycling the heat on and off, helping maintain consistent drying performance and protect against overheating.

Controls the cycling temperature of the heating circuit to prevent underheating or overheating
Helps resolve symptoms like no heat, not enough heat, long dry times, or temperature swings
A faulty thermostat may cause overheating that can trip the thermal fuse
Located on the blower housing on many models

What's included: 1 internal-bias thermostat Install notes:

Disconnect power and shut off gas (for gas dryers) before servicing
Access the blower housing; note wire positions and transfer one at a time
Mount the thermostat flush to the housing for proper sensing
After installation, run a test cycle to verify proper heating

This part fixes the following symptoms

Too hot

Do-It-Yourself Stories from Customers like You Thermal fuse blew John P. • Palm Coast , FL • January 02, 2016

Cleaned exhaust duct, but only from the dryer/laundry room side. Replaced thermal fuse. Unit worked for about two loads and thermal fuse blew again. This time I cleaned the exhaust vent on the roof of my 2-story house. It was found to be partially obstructed and I was able to remove a significant amount of lint from it. Also, I researched the problem and followed someone's advice to replace the cycling thermostat together with the thermal fuse if the thermal fuse blows. So far it has been... Read more

$62.61

Compare At:: $73.88
You Save:: $11.27

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Washer Spring Fastener Retaining Clip

4.9 (7)

By: Whirlpool

Part Number: WP22001650

Secures components with constant tension to prevent looseness and vibration. Replace if broken, fatigued, or missing. Verify fit with your model number.

This part fixes the following symptoms

Noisy

Do-It-Yourself Stories from Customers like You Drum guides had worn out Robert S. • North Apollo , PA • October 08, 2014

Replaced them. Read more

$9.63

Compare At:: $11.36
You Save:: $1.73

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Dryer Idler Bracket Spacer

4.9 (9)

By: Whirlpool

Part Number: WPW10116756

Maintains proper spacing and alignment in your dryer's belt path. Replace if you hear squeaking or notice belt tracking issues. Verify fit with your model.

Do-It-Yourself Stories from Customers like You The motor burned up after 28 years Robert M. • Paw Paw , MI • December 20, 2016

I replaced the motor and all other moving components along with the felt drum seals.drum glides and drive belt. The wiring instruction is where i had the most problems. Because my wiring had only 4 wires in the harness not 5, and one was a different color then the instructions call out, I believe was because it might have been and older model. the instruction called for a gray wire but mine was white with a blue piggy back wire attached. but after finding a few videos on line i figured that the... Read more

$34.23

Compare At:: $40.73
You Save:: $6.50

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Jumper Wire

4.7 (6)

By: Whirlpool

Part Number: WPY307173

This jumper wire connects two terminals in an appliance circuit to maintain proper electrical continuity. Replacing a burnt or damaged jumper restores reliable connections so switches, heating elements, and controls receive power as designed.

Links designated terminals to complete the circuit per the unit's wiring diagram
Restores continuity when the original jumper or connector is heat-damaged, corroded, or broken
Visual indicators can include discoloration, melted insulation, or loose spade terminals at the old jumper

Includes: One jumper wire.

Disconnect power at the breaker/fuse; turn off gas supply if applicable
Reference the unit's wiring diagram; label/photograph existing connections
Move one lead at a time; fully seat terminals and match orientation
Do not use to bypass safety devices; replace any overheated mating connectors

Do-It-Yourself Stories from Customers like You Heat stopped working on my dryer. Todd G. • Winder , GA • February 23, 2020

Replaced jump wire and thermostat. Read more

$11.95

Compare At:: $13.33
You Save:: $1.38

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Rubber Foot

5.0 (1)

By: Whirlpool

Part Number: WPY314137

The rubber foot is an OEM replacement part for Whirlpool washing machines. This small but essential component fits beneath the leveling legs, providing stability and preventing the appliance from moving or vibrating excessively during operation. It also protects flooring surfaces from potential scratches or damage.

Symptoms of a bad Leveling Leg Pad include:

Increased vibration or noise during the wash or spin cycle
The washing machine wobbling or becoming unsteady
Visible wear, cracks, or damage to the pad

Causes of a failing Leveling Leg Pad can include wear and tear from prolonged use, exposure to moisture, or excessive weight causing deformation. Replacing worn pads helps maintain the appliance's balance and efficiency.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

For the leveling leg order W10176519.

Do-It-Yourself Stories from Customers like You Unlevel and shaking moving out of position cracked dryer igniter Steven B. • Grantsville , WV • April 26, 2016

Replaced dried crumbling rubber foot. Cleaned inside and outside of dryer before installing igniter cleared vent hose. Leveled unit installed dryer igniter. Fired it up.Runs Great Now. Read more

$7.95

Compare At:: $9.38
You Save:: $1.43

IN STOCK

Ships Today Guaranteed

Add to Cart

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Lde9608acm Parts

Dryer Thermal Fuse

Door Catch Kit

Timer Knob

Dryer Heating Element Assembly

Dryer Thermal Fuse

Screw

Timer Knob Insert

Hex Nut

Appliance Fastener Screw

Light Bulb

Dryer Heating Element Assembly

Internal-Bias Thermostat (Dryer)

Washer Spring Fastener Retaining Clip

Dryer Idler Bracket Spacer

Jumper Wire

Rubber Foot

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Lde9608acm Parts

We respect your privacy

Manage consent preferences