Lfss2612tf3 Parts

If you can't pull out the displacement pins on the crisper cover support clips that allow the wall to carry the weight of the cover, slides and drawer, you may need to push those pins in (they fall down the wall) to remove the clip. During the replacement of both front clips, I had one I could remove and one I had attempted to drill a tiny hole in to be able to pull the pin. Ultimately it did not work and needed to be simply pushed in. Do not worry, there is nothing below which the plastic... Read more

• Noisy

1. After hearing a loud noise on the freezer side of unit about halfway up, I started investigating what it could be? My conclusion was evaporator motor or evaporator fan blade. One of the signs of this issue was a distinct change in sound when I opened the freezer door. I ordered a new motor and blade, not knowing exactly what it was. 2. I couldn't get water to dispense, so I changed the filter and that wasn't the problem. I ordered a water valve and crossed my fingers. These parts arrived... Read more

Manufacturer no longer makes part, but found rough equivalent by searching AppliancePartsPros.com web site. Not exact fit, but excellent substitution. Simple replacement of shelf on existing bracket. Read more

First, I paid for two-day shipping, but the part arrived the day after I ordered. Awesome service!! For reference, I am a 28-year-old female with little repair experience (though I'd consider myself pretty handy in general and able to figure out most things in life - not a damsel in distress.) This was a relatively easy fix once you figure out how to take down the motor housing, unsure of correct terminology, hard to find a diagram out there that provides a name for all of the parts, where the... Read more

Replaced drawer. Had to reorder the drawer, I ordered the wrong one first. Sent first drawer back and having to wait too long for refund plus I had to pay shipping both ways of which was my fault, but appliance parts pro is very slow compared to other companies policy for returns, need to work on this guys! Read more

I paid to have a repairman diagnose the problem, HOWEVER, after submitting a quote for repair I knew that it was a ripoff to take advantage of us. He said the prices for the part and labor was given to him by his company. The part (evaporator fan motor) cost me under 40.00 from AppliancePartsPro, yet they wanted 90.00 for it. The labor charge they quoted was 190.00 to install the fan motor, yet after googling the day to install it, it took 10 minutes, had to remove 6 screws and unplug the... Read more

I originally ordered the Fan motor from a appliance dealer. I waited for 5 days for it to arrive. In the meantime I scavenge a motor from a junk refrigerator from the dump. It worked while I waited for the motor from the appliance dealer. When I picked it up 5 days later it was the "wrong" part. I was fuming mad. I went online and found you guys and ordered the correct parts in 5 minutes. It arrived in 1 day and a half, "COOL" ! The repair went quick and smooth and now the refrigerator runs... Read more

It was a pretty easy fix not as easy as the 1 nut models they show on YouTube it had 3 tiny ones that my big hands had a bit of trouble with. It said 15 minutes it took me about a half an hour. I called a service company just to see what they would charge. $90.00 to say hello 1 hour minimal labor $110.00 and $120.00 for the part. It cost me $90.00 and 30 minutes of my time. Thank you appliance pro. Read more

I replaced the damper and thermistor assemblies. I saw another story here that was just like mine. Damper door was shut and would not open. I opened it manually then it would close and not reopen when reinstalled. I replaced the suggested parts and all was good. All in all a simple do it yourself repair to save hundreds. Read more

Got the six year old refrigerator from my daughter because of it freezing up but was in good ( Stainless Steel) shape to replace our 21 year old Kitchen Aid. The thermistor had been replaced as a cheap first step but didn't correct the problem as it totally froze over within five days. I decided to tear down again and check the defrost heater element which was found to have an open circuit and hence the replacement part. Thanks to AAP, I ordered the part at the weekend, was shipped on Monday... Read more

Just slide in it Read more

Initially I noticed the crusher drum was cracked and broken so I replaced the drum the retaining nut on the end of the auger and the circlip and washer. it worked fine for a time and then the drum began free wheeling. upon further inspection I discovered the retain nubs on the auger had worn down allowing the blade to slip down the auger body. so I replaced the auger, drum, drive blade, and drive cam. I recommend if you gave a problem with the ice dispenser you break down and inspect the entire... Read more

• Ice maker dispenses too much ice

Replaced the housing Read more

Ordered part from appliancepartspros.com and got them within 2 days.that was great,refrigerator is like new again,am I am pleased with service and there swift delivery. If I need any thing else,there is only one place I will get them.from. Thanks! Read more

Put a new one in an easy fix but a hard bulb to fine Read more

I ordered a replacement handle and screws. The process was very easy with the help of one of your "pros" who found all the parts needed and took my order. I didn't realize I was getting both a refrigerator door handle and a freezer door handle in one set, but now we have the freezer handle if we need it. Removing the old handle and installing the replacement was very easy. It looks great, in fact the replacement is metal, whereas the original was plastic, so it looks better than it ever did! Read more