Your privacy choices: We and our partners use cookies for analytics and ads. Decline all turns them off.
Privacy Policy · Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Ice Dispenser Door Motor is an OEM part for LG refrigerators. This motor is responsible for the operation of the ice dispenser door, controlling its opening and closing mechanism to allow ice to be dispensed without letting warm air into the freezer.
Symptoms of a bad Ice Dispenser Door Motor include:
Causes of ice dispenser door motor failure can include electrical issues such as shorts or wiring problems, mechanical wear over time, or blockages that strain the motor.
This OEM LG part is also compatible with Sears/Kenmore.
Unplug refrigerator. Use non marring (plastic trim stick) tool to gently pry loose the plastic assembly containing the PCB display beginning at the lower edge and proceeding around the outer edge. Disconnect all connectors and note the routing of each wire harness and connector (take pictures on cellphone as necessary). Remove two screws holding inner PCB mount bracket in place to expose actuator, flapper door and linkage. Replace actuator (three mounting screws) and ensure that actuator... Read more
Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.
Removed and replaced the compressor start relay. Read more
Replaces the flap panel between French doors that seals the center gap. Order when original is cracked, broken, or won't stay closed properly.
Ordered new French door mullion and upper Door Bracket. Door works perfectly. *Please note: The French door mullion already includes a new Door Bracket tapped on so, there is no need to purchase another Door Bracket Read more
This tube supplies water to the ice maker and water dispenser systems, running from the water source to the dispensing mechanisms. Replace when you experience low water flow, no ice production, or visible leaks along the water line path.
Ordered new tube part AJR56656503 for Lg LFX25978ST/01 watched a lot of videos but none showed how to remove the door tube end from its connection so I just cut and spliced the new tube to the old under the cover for the door hinge area after feeding it from the back of frig to that area. It was easy till I tried to remove the line end from ice maker area. Read more
The Refrigerator Temperature Sensor is an OEM part for LG refrigerators. This sensor monitors the temperature inside the refrigerator and communicates with the control board to maintain the optimal cooling environment.
Common causes of failure include wear and tear over time, electrical issues, or exposure to moisture. A malfunctioning sensor can lead to inaccurate temperature readings, resulting in improper cooling or freezing.
Symptoms of a bad refrigerator temperature sensor include:
This OEM LG part is also compatible with Sears/Kenmore models.
I replaced the evaporator sensor. Your company sent me the exact sensor I needed at a great price. No other company was able to help. No call was needed. Your website was great. Read more
Keeps refrigerator air fresh by filtering odors and contaminants. Replace every 6 months or when indicator alerts. Confirm fit with your model number.
Just wanted to say how incredibly nice and helpful the gentleman was that helped me on the phone when I called to place the order. Very nice..... Read more
Right-side support rail for refrigerator freezer baskets. Replaces cracked, broken, or worn rails causing baskets to slide poorly or fall off track.
Ordered the plastic glides that connect to the metal rails. Super easy fix! Read more
Fix a dispenser that won't stop running or fails to dispense ice or water. This switch activates your dispenser when pressed. DIY-friendly repair.
After my layman's diagnosis (hope) of a bad micro switch to the ice dispenser (would not activate and dispense ice through the chute) I purchased the both the ice and water dispenser micro switches (kill two birds with one stone). Albeit the video attached to these parts may be helpful to some it was not applicable to my refrigerator, as you could not access it from the front by removing the exterior dispenser plate. Don't try this on the LG, LFX25991ST series, refrigerator or you may break it... Read more
The Front Panel Display Assembly is an OEM part for LG refrigerators. This assembly includes the control panel and display, allowing users to interact with and monitor the refrigerator's functions, such as temperature settings, ice and water dispensing, and other features. It provides a convenient interface for adjusting and controlling the refrigerator's operations.
Causes of a bad front panel display assembly can include electrical malfunctions, physical damage from impacts or mishandling, or wear and tear over time. A malfunctioning display assembly can affect the overall usability and functionality of the refrigerator.
Symptoms of a bad front panel display assembly include:
Ordered the entire control panel. Took only 30 minutes to replace. Once I received the new part, it was obvious how easy it would be to replace. A thin putty knife and a little care not to damage the surrounding surface was all that was needed. Read more
Ice maker not dumping ice or auger motor making grinding noise? This assembly produces and dispenses ice. DIY repair in under 20 minutes with video guide.
Looking online for ice maker repairs on LG, came across several videos. AppliancePartsPros.com had a very good video, after watching I looked up my model reference and found the assembly I needed. Easy online order had the part in 2 days. I installed it as the video had directed, easy to install with only a screwdriver. Great experience. Read more
The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators, designed to support and pivot the refrigerator door, allowing it to open and close smoothly. This hinge is a critical component for the proper alignment and function of the door, ensuring an airtight seal when closed to maintain the internal temperature and efficiency of the refrigerator.
Causes of damage to the lower refrigerator door hinge often include normal wear and tear, excessive force when opening or closing the door, or corrosion due to moisture and cleaning agents.
Symptoms of a bad Lower Refrigerator Door Hinge include:
This OEM LG part is also compatible with some Kenmore models.
Replaced both lower hinges and it did fix the problem. The only issue I had was when reinserting the water line. Because of the slight bend in the hose, it was catching at the end before exiting in the back. Hopefully I didn't tweak the line to cause any future issues. I did need pliers to pull one of the old hinges out. Read more
Freezer frosting over or refrigerator not cooling? This defrost control assembly regulates the defrost cycle to prevent ice buildup. Moderate DIY repair.
Crisper glass shelf sits above crisper drawers in your refrigerator. Replace if cracked, shattered, or broken. Provides clear view and support.
After an extremely fast delivery by AppliancePartsPros.com, all I had to do was cut the box open, unpackage the glass, and lay it in place. It was a perfect fit (thanks to the very detailed schematic on the website. From order to installation - 48 hours. Read more
This is a temperature sensor assembly that monitors the internal temperature of the refrigerator compartment and relays readings to the control board. It helps regulate cooling cycles and defrost timing to maintain proper temperatures. Replace this sensor if your refrigerator is running too cold, too warm, not defrosting properly, or displaying error codes related to temperature.
Removed back cover in refrigerator to find the coil frozen. I ordered the part overnight and I replaced the defrost sensor, now all is well!! Fast and easy thanks to AppliancesPartsPros.com!! Read more
Fix a broken or cracked freezer drawer that won't slide properly. This complete drawer assembly includes basket, runners, and glides. DIY-friendly repair.
I ordered the parts they arrived quickly and I installed them with my in-law. The company sent me a video of the installation of one of the pieces and the others were easy to install. Read more
Ice won't dispense or keeps flowing? This ice dispenser button replaces broken levers causing continuous dispensing. DIY-friendly repair in 30-45 minutes.
Very helpful video from a link on your website (https://www.youtube.com/watch?v=EBIv0bxEhkE), and saved me a major repair bill. My journey started with an effort to replace just the water dispenser button, which failed because the fifth post on the back side of the button (not the four posts which hold the button in place--it's the extra rectangular piece visible near the repairman's pinkie finger at 3:04) had broken off, and it is this piece which reaches and moves the actuator for the water... Read more
Opt-Out Request Honored
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.