Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replaces cracked, frozen, or leaking ice maker fill tube. Directs water from supply line into ice maker tray. Common replacement for damaged tubes.
Changed the Frigidaire Icemaker Fill Tube Part # 241796405 (AP5671747) about a week ago and so far the Frigidaire Refrigerator seems to work fine. Did not use other ordered parts. Recently ice formed around internal evaporator fan and it started making loud noise when then fan and compressor, etc were running. A long winded history noted below if interested: I have been fighting with this Frigidaire Refrigerator for about 3 to 4 years, started out with the evaporator fan making noise when ice... Read more
Replaces cracked, leaking, or melted ice maker fill tube that carries water from the supply line to the ice mold. Installs in the freezer compartment.
I watched a similar fix on another refrigerator from the website videos and the fix took less than 5 minutes with no tools required. I really liked how their online chat service was able to find an appropriate replacement part as the original manufacturer has discontinued the part. I will definely use these guys again! Read more
Epoxy-coated rail that supports and guides refrigerator shelves for smooth sliding. Replace when dented, scratched, or the finish is damaged from wear.
The Dryer Timer Knob is an OEM part for Frigidaire dryers. It is responsible for allowing users to set the drying time and cycle selection by turning the timer shaft. The knob securely attaches to the timer and provides an easy way to control dryer settings.
Over time, the timer knob can become damaged due to repeated use, excessive force when turning, or wear on the internal connection points. If the knob becomes stripped, cracked, or no longer stays in place, it may need to be replaced.
Symptoms of a bad timer knob include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
The old knob was not repairable. I ordered a new knob for the washer dryer stack unit. The order came within two days of ordering and it was the correct part. I was pleased. Read more
The Door Switch is an OEM part for Frigidaire dryers. This part ensures that the dryer operates safely by only allowing the machine to run when the door is completely closed. Positioned typically at the door frame, the switch activates when the door is shut, signaling the control system that it's safe to begin the cycle.
Over time, door switches can wear out or become damaged, which can interfere with the normal operation of the dryer.
Symptoms of a faulty Door Switch include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
By reading the forums I first thought it may be the thermostat. I bypassed the thermostat wiring and the dryer still turned off after a few second of running. The second check was for the door switch. I couldn't find an explanation of how to bypass, so I just ordered a new one to try. It worked. Read more
The Drum Bearing Bracket is an OEM replacement part for Frigidaire dryers. It holds and supports the drum bearing, which allows the dryer drum to spin smoothly during the tumbling and drying cycle. Causes of failure can be cracking or breaking of the bracket over time due to constant use and stress. Improper installation that puts strain on the bracket may also lead to issues. Symptoms of a bad drum bearing bracket include:
This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
I watched the helpful diy video. It gave me what the problem was and the confidence to do it. Took my dryer apart with the helpful hints in the video repair went smooth. Works like a dream and I saved money. Thank you appliance parts pros. Read more
Ice buildup in fresh food section or around evaporator? This air handler housing kit stops warm-air leaks that cause frost and temperature swings. 30-min repair.
I removed the fresh food ice maker found the drain tube for ice maker frozen. This was causing the back of the unit to rust out. This also caused the water to run down the back of the unit the into the duct work and into the freezer causing ice buildup. I then defrosted the freezer removed the rear duct work and the freezer drain pan cover. I found the freezer drain was not draining. I removed the exterior rear cardboard cover and located the freezer drain tube removed it and found that it was... Read more
Ice buildup in your freezer? This defrost thermostat monitors temperature and triggers defrost cycles. Fixes frost on rear panels and ice maker areas.
Replaced main board. The defrost heater and thermostat. Read more
The Start Switch is an OEM replacement part for Frigidaire dryers. This part initiates the dryer's cycle once the user selects the desired settings. By pressing the start switch, the motor activates, and the drying process begins, ensuring clothes are dried according to the selected specifications.
Symptoms of a bad Start Switch include:
Causes for a malfunctioning Start Switch can include electrical issues, such as faulty wiring or connections, wear and tear from frequent use, or internal failures within the switch mechanism that prevent it from signaling the motor to start.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryers.
I went online, ordered the part and installed it,,, took 15 minutes to install,,,saved huge $$$ easy peasy!! :-) Read more
Storage bin that mounts inside the refrigerator door to hold condiments, butter, and eggs. Replace if cracked, broken, or missing for proper organization.
I purchased replacement bins from AppliancePartsPros.com and swapped them out. Easy-peasy. Read more
Replacement crisper drawer for refrigerators. Stores and organizes fresh produce in humidity-controlled compartment. Replace if cracked, broken, or missing.
Fix ice buildup in freezer or water leaking into fridge. This defrost heater melts frost from evaporator coils during defrost cycles. Moderate DIY repair.
Replaced evaporator heater and housing. Just make sure you also replace the thermostat. If not it is a little challenging to get the wires out of the old thermostat/ heater plug into the new plug. Also if you have the same problem be prepared to have a good heat gun to melt the ice buildup around the evaporator and drain hole. The ice build up was so bad that it destroyed the evaporator cover and was leaking into the refrigerator or should I say ice was forming below the evaporator cover... Read more
Fix a fridge that's freezing food or not cooling properly. This air damper controls cold airflow between compartments. Moderate DIY repair for most models.
Ice won't dispense or crush? The ice container assembly stores and dispenses ice. Includes auger and blades. Easy DIY repair—just slide in and go.
Replaced entire unit with part we ordered from you. Read more
The Crisper Pan is an OEM part for Frigidaire refrigerators. This pan is designed to store fruits and vegetables, helping to maintain optimal humidity levels to keep produce fresh for longer periods.
Causes of a bad crisper pan can include cracks or breaks from accidental impacts, wear and tear from regular use, or warping due to temperature fluctuations.
Symptoms of a bad crisper pan include:
Drawer was reordered and replaced...fast! Read more
Dryer drum bearing ball ensures smooth drum rotation. Replace if drum wobbles, squeaks, or won't turn. Confirm fit with your model number before ordering.