Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Lset80ace Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Dryer Thermal Fuse
Genuine Whirlpool part
By: Whirlpool
Part Number: WP306604

Dryer won't heat or start? This thermal fuse cuts power when temperatures get too high. Test with a multimeter for continuity. Easy DIY repair.

This part fixes the following symptoms
  • Won't start
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You Maytag gas dryer was not heating   Christopher P. • Los Angeles , CA • October 04, 2014

Did some dryer repair research (dryer not heating) on the internet. Bought an ohm meter, opened up the dryer and tested the cut-off-T, high limit thermostat, dryer igniter, flame sensor, cycling thermostat for continuity. The igniter was bad, the other parts tested ok. Went online to AppliancePartsPros.com searched for a new igniter for my specific dryer model, found the right replacement igniter and watched the video on how to replace the igniter. Because my dryer is old (15+ years) and I... Read more

More
$29.48

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Washer Siphon Break Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 208847

Replaces broken or cracked siphon break assembly on your washer. Installs on back panel where drain hose connects. Needed when elbow becomes brittle.

Do-It-Yourself Stories from Customers like You Siphon break elbow broke when repositioning maytag (whirlpool) washer/dryer for new floor installation   Jeffry S. • West Lafayette , IN • November 16, 2015

Ordered Siphon Break Kit. Speedy shipping, thank you. Attached video shows how to remove front of washer to access screws to loosen top of washer to access siphon break from inside washer cabinet. http://www.do-it-yourself-washing-machine-and-dryer-repair-help.com/siphon-break-Maytagwasher.html Read more

More
$32.64

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Range Pcb Supporter
Genuine Lg part
By: Lg
Part Number: MJH63756801

If your range control panel is loose or cooking functions are erratic, the PCB supporter may be cracked. This mounting bracket secures the circuit board.

Do-It-Yourself Stories from Customers like You LG range oven control spindle broke   Alan H. • Poughkeepsie , NY • May 29, 2022

Removed front panel, disconnected the wires- marking each plug so it would go back correctly. Removed the control housing, and replaced the parts. Reassembled. You guys are absolutely great. Read more

More
$29.30

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Appliance Fastener Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY014874

Factory fastener screw secures panels, brackets, and trim inside appliances. Replace missing, stripped, or damaged screws to restore tight fit.

Do-It-Yourself Stories from Customers like You Loud squealing noise   William B. • Rocky Mount , NC • December 17, 2018

First replaced the drum rollers...that wasn't it..took dryer back apart and spun the belt tension wheel by hand (should have done this the first time I took the dryer apart) and it squeaked. so I ordered the full parts: wheel, idler arm, idler spring, arm sleeve, E ring..Put it back together and whoa..no more squealing!! Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Washer Drain Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001448

Carries wastewater from your washer to the household drain. Replace if cracked, split, or leaking at connections to pump or drain standpipe.

Do-It-Yourself Stories from Customers like You Water leak at the siphon break part saw water on floor opened washer and observed leak during spin cycle   Russ C. • Jacksonville , FL • June 02, 2018

I decided to order the siphon break kit (siphon break, washer and clamp included), a new hose, and clamp (for the bottom hose connection) as the hose was original and well over 15 years old. I probably could have used the old clamp, but decided to get a new one in case there were problems with the old during removal. The video provided by A.P.P was helpful in giving confidence this was a task that could be done by myself. As was shown in the video, the hose connection to the siphon break had a... Read more

More
$63.65

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Electric Range Radiant Surface Element
Genuine Lg part
By: Lg
Part Number: MEE62385101

Replace a burned-out smoothtop burner that won't heat. This radiant element restores consistent heating to glass cooktop zones. Simple DIY repair.

Do-It-Yourself Stories from Customers like You Burner quit working   Geri V. • Wymore , NE • August 27, 2020

Removed old burner, replaced it with new burner. Pretty simple. Read more

More
$220.10

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Hex Nut
Genuine Whirlpool part
By: Whirlpool
Part Number: WP33001443

This Hex Nut is a small but critical fastener used to secure brackets, panels, and internal assemblies in your appliance. Replacing a stripped, corroded, or missing nut restores a tight, rattle-free, and safe installation.

  • Threads onto a matching bolt or stud to clamp parts together
  • Helps maintain alignment and reduce vibration-related loosening
  • Commonly used on panels, brackets, supports, and internal assemblies
  • Replace when threads are damaged, hex flats are rounded, or hardware is missing
  • Symptoms can include loose or rattling components or hardware that won't stay tight
What's included: One hex nut. Install notes:
  • Disconnect power and, if applicable, shut off gas or water before servicing
  • Use the correct-size nut driver or wrench to avoid rounding the hex
  • Start the nut by hand to prevent cross-threading; tighten snugly without over-torquing
  • Inspect and replace any damaged mating bolt/stud or washer for a secure repair

Do-It-Yourself Stories from Customers like You The rollers needed to be replaced, the axles for the rollers needed to be replaced, the tension pulley roller needed to be replaced, the belt needed to be replaced   Richard G. • El Paso , TX • December 18, 2018

It took me about 2 hours to take everything apart and get it back together & running again with no problems. All the parts I ordered were exactly what I needed to fix everything. Thank you all !!! Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Spring Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 202718

This factory spring kit restores the designed tension and return action in the affected assembly so moving parts operate smoothly, stay in position, and wear evenly over time.

  • Provides the correct counterforce to position or balance components
  • Maintains steady tension to prevent drift, slamming, or misalignment
  • Helps reduce squeaks, chatter, or uneven movement from fatigued springs
  • Typical signs of failure: weak return, inconsistent movement, excess noise, or visible spring damage
What's included: Manufacturer-supplied spring kit components. Installation notes:
  • Disconnect power; shut off water or gas before servicing
  • Wear eye protection—springs are under tension
  • Note original spring anchor points and replace all springs in the kit as a set
  • Use appropriate pliers or a hook tool; verify smooth operation before reassembly

Do-It-Yourself Stories from Customers like You Washer would only spin.   Byron V. • Bellevue , MI • February 04, 2020

Found the wonderful parts diagrams you most generously share online and a couple of YouTube videos . I determined it should be repairable. In my cast the agitator shaft was frozen (rusted) in place. I was very fortunate to have been able to eventually remove it with the use of a lot of BP penetrating oil and heat. Long and short the replacement parts fit perfectly and the washer is running like new. Special thanks to the online support make my repair possible. Read more

More
$8.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Range Encoder Board
Genuine Lg part
By: Lg
Part Number: EBR80327001

Fix an unresponsive oven control knob or broken control dial. This encoder board detects knob position and sends signals to adjust temperature settings.

Do-It-Yourself Stories from Customers like You Broke lever supporter on LG oven control knob.   Mark N. • Downingtown , PA • December 22, 2021

Replaced the cheap plastic lever supporter with another LG OEM cheap plastic lever supporter. I should have bought two as I can see this problem happening again. Job was a simple fix and only required a Phillips head screwdriver. I did not need to remove any connections as there was enough room and wire to pull out the oven control assembly and make the repair. One word of caution is to be careful as the sheet metal internal cover and bottom of the control knob panel is razor... Read more

More
$106.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Washer Tub Cover Gasket
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001007

Seals the tub cover to prevent leaks during wash and spin cycles. Replace if water leaks from the top of the tub. Confirm fit with your model number.

Do-It-Yourself Stories from Customers like You Leaking water from washing tub   E M. • Danville , KY • May 22, 2016

Replaced mounting stem and tub bearings Read more

More
$60.52

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Electric Range Broil Element
Genuine Lg part
By: Lg
Part Number: MEE62306504

Oven won't brown or crisp food on top? Replace the broil element. This upper heating component restores efficient broiling in electric ranges.

Do-It-Yourself Stories from Customers like You Broiler element burnt out   Ralph M. • South Daytona , FL • April 08, 2026

Replaced Read more

More
$106.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Range Oven Door Spring
Genuine Lg part
By: Lg
Part Number: MHY64083701

Fix an oven door that won't stay open or slams shut with this range door spring. Simple DIY repair requiring only a Phillips screwdriver, 30 minutes.

Do-It-Yourself Stories from Customers like You Broke lever supporter on LG oven control knob.   Mark N. • Downingtown , PA • December 22, 2021

Replaced the cheap plastic lever supporter with another LG OEM cheap plastic lever supporter. I should have bought two as I can see this problem happening again. Job was a simple fix and only required a Phillips head screwdriver. I did not need to remove any connections as there was enough room and wire to pull out the oven control assembly and make the repair. One word of caution is to be careful as the sheet metal internal cover and bottom of the control knob panel is razor... Read more

More
$8.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Washer Siphon Break Elbow
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10116738

90-degree drain connector that creates an air break in the drain path. Replace if cracked, broken, or leaking to restore proper water drainage.

Do-It-Yourself Stories from Customers like You Syphonbreak was leaking   James O. • Bryant , AL • September 04, 2015

We ordered parts from appliance parts pros and I fixed it. Read more

More
$26.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Light Bulb
Genuine Whirlpool part
By: Whirlpool
Part Number: W10857122

The Light Bulb is an OEM part for Whirlpool refrigerators. This part illuminates the water and ice dispenser area, providing visibility and ease of use, especially in low light conditions. 

Over time, the light bulb can fail due to normal wear and tear, electrical surges, or damage from vibrations and impacts. 

Symptoms of a bad light bulb include:

  • The dispenser area not lighting up when activated
  • Flickering or dim lighting
  • The bulb failing to turn on consistently

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You My dryer was making noise   James M. • Middletown , RI • September 19, 2014

I went on line and purchased all of the possible parts that could be worn out. I spent less than the service guy wanted to show up...The online videos were spot on. Two hours and it works like new! One of the best values on the Internet! Read more

More
$15.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Drum Tumbler Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WP33313541

Seals the gap between drum and bulkhead to maintain airflow and drying performance. Replace when worn to reduce noise and prevent snagging. Verify fit.

Do-It-Yourself Stories from Customers like You Normal wear and tear to my 25 year old maytag   Kevin T. • Halls , TN • March 07, 2015

I replaced the seals and tub bushings to bring back a quieter operation and keep from doing more damage.I have done so since it was new in 1990. It still has a lot of kife left in it. And it beats buying a new unit any day. Read more

More
$44.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Internal-Bias Thermostat (Dryer)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387137

This internal-bias thermostat regulates dryer drum temperature by cycling the heat on and off, helping maintain consistent drying performance and protect against overheating.

  • Controls the cycling temperature of the heating circuit to prevent underheating or overheating
  • Helps resolve symptoms like no heat, not enough heat, long dry times, or temperature swings
  • A faulty thermostat may cause overheating that can trip the thermal fuse
  • Located on the blower housing on many models
What's included: 1 internal-bias thermostat Install notes:
  • Disconnect power and shut off gas (for gas dryers) before servicing
  • Access the blower housing; note wire positions and transfer one at a time
  • Mount the thermostat flush to the housing for proper sensing
  • After installation, run a test cycle to verify proper heating

This part fixes the following symptoms
  • Too hot
See more...
Do-It-Yourself Stories from Customers like You Thermal fuse blew   John P. • Palm Coast , FL • January 02, 2016

Cleaned exhaust duct, but only from the dryer/laundry room side. Replaced thermal fuse. Unit worked for about two loads and thermal fuse blew again. This time I cleaned the exhaust vent on the roof of my 2-story house. It was found to be partially obstructed and I was able to remove a significant amount of lint from it. Also, I researched the problem and followed someone's advice to replace the cycling thermostat together with the thermal fuse if the thermal fuse blows. So far it has been... Read more

More
$62.61

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google