Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Ltg5243dn Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Dryer Drum Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: 3394652

Replace your dryer drum belt when clothes stop tumbling or you hear squealing. This 79-1/8" belt wraps around the drum and motor to rotate clothes evenly.

Do-It-Yourself Stories from Customers like You Dryer drum would not turn heat worked fine   Charles K. • Pittsfield , MA • March 03, 2019

I used the web site to figure out the most likely causes for the drum not turning. I watched the web site's videos to see what I would have to do and thought it wasn't too bad; something a rookie could do. Ordered the parts (belt and idler arm) and followed the directions from the videos. Mostly a bunch of screws/bolts to remove with a couple in difficult places. (my dryer isn't full sized) There were some electrical connections to take apart. As i disassembled it, I took pictures of where... Read more

More
$48.46

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Agitator Cap
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3355758

The Agitator Cap is an OEM part for Whirlpool washing machines. It fits on top of the agitator and helps secure the agitator components, ensuring proper functioning during the wash cycle. This cap is essential for maintaining the agitator's efficiency and preventing water from entering the agitator assembly.

Causes of a bad agitator cap can include wear and tear from regular use, cracking or damage from impacts, or degradation due to exposure to detergents and water over time.

Symptoms of a bad agitator cap include:

  • The cap being loose or not fitting properly
  • Water leaking into the agitator assembly
  • Excessive noise during the wash cycle
  • Reduced agitation performance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Broken upper section of our Whirlpool agitator also known as a filter   David I. • Heathsville , VA • September 04, 2019

Simply lift up the old filter and cap and discard it. The new assembly simply pushes down and on to the agitator base. It stays in place by clicking over a raised perimeter rib on the base. This is the easiest repair (short of screwing in a light bulb) that one could do. The hardest part was to identify which parts I needed to purchase. The parts associate at Appliance Pros was terrific in tracking down what was needed. Read more

More
$9.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Tub Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: W11095997

Seals the washer shaft to prevent water leaks from the tub during wash cycles. Replace if you notice water pooling under your machine. Verify fit.

Do-It-Yourself Stories from Customers like You Agitator would not work   David W. • Murfreesboro , TN • November 19, 2014

Used the parts and youtube video from your company. Read more

More
$23.61

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Front Bearing Support And Drum Felt Seal Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 279264

Replaces worn dryer front bearing and seal that cause squealing or scraping noise. Essential for smooth drum rotation. Confirm fit with your model.

This part fixes the following symptoms
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Noisy & inefficient   Richard M. • Indianapolis , IN • December 06, 2016

After having replaced the drum support rollers twice in a roughly 3yr period, I realized something wasn't quite right, and indeed it wasn't. I had been ordering the wrong parts - I did use the online parts locator after checking, & double checking my model number. Apparently my older Whirlpool dryer has a somewhat ambiguous model number because the rollers that were shipped each time looked nothing like the originals. I realize that is not particularily uncommon - manufacturers often modify... Read more

More
$67.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Hose Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285655

The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.

Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

  • Water leaks around the hose connection points
  • The hose slipping off the fitting
  • Visible rust or wear on the clamp
  • Difficulty in tightening the clamp to secure the hose

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Syphonbreak was leaking   James O. • Bryant , AL • September 04, 2015

We ordered parts from appliance parts pros and I fixed it. Read more

More
$9.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Cover Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3349985

Prevents water leaks between washer cover and tub during wash cycles. Replace if leaking or water escapes during washing. Verify fit with model number.

Do-It-Yourself Stories from Customers like You Washer would not spin   Joseph S. • La Grange , KY • February 14, 2016

Disassembled and confirmed the clutch was bad. Also noticed a slight leak from the transmission shaft seal. Ordered replacement clutch, seal and oil from appliancepartspros.com. The parts arrived very quickly and exactly as ordered. Their repair videos were very accurate and made the job easy. I accomplished a quality repair at a reasonable cost. My thanks to the folks at appliancepartspros.com for making it possible! Read more

More
$20.38

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Door Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3406108

The Door Switch is an OEM part for Whirlpool dryers. It is responsible for detecting whether the dryer door is open or closed. When the door is closed, the switch allows the dryer to operate. Conversely, if the door is open, the switch interrupts the electrical circuit to prevent the dryer from running, ensuring safety during use.

You should replace the door switch if it becomes faulty. Causes of a bad door switch can include wear and tear from regular use, electrical failures, or physical damage from repeated opening and closing of the dryer door. A malfunctioning door switch can prevent the dryer from starting or cause it to stop mid-cycle.

Symptoms of a bad door switch include:

  • The dryer not starting or responding when the door is closed
  • The dryer stopping mid-cycle without reopening the door
  • The dryer continuing to run when the door is opened
  • Error codes related to the door switch or door lock mechanism

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Broken door switch and lint filter cover   Christopher W. • Collierville , TN • December 14, 2014

Plug and play minus a few screws to remove, simple repair. Read more

More
$35.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Start Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3395382

The Start Switch is an OEM replacement part for Whirlpool dryers. It is an electronic component responsible for initiating the heating elements and tumble cycles upon user command from the control panel.   

Causes of a bad start switch involve general wear over extended use. Failure of the internal conducting surfaces interrupts circuit activation as well.

Symptoms of a bad start switch include:  

  • Heating elements or tumble cycles that will not engage properly
  • Dryer fails to operate or stops mid-cycle unexpectedly
  • Control panel appears non-responsive to selections  
  • Error codes related to ignition or power delivery faults

Note: This dryer push-to-start switch has 2 terminals.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore electric dryer models. 

This part fixes the following symptoms
  • Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You Dryer wouln't start heard the timer working but the starter wouldn't start   Perry B. • Stockton , CA • December 05, 2014

I replaced the starter switch, that really didn't need to be replaced, and the thermal fuse, which did. Read more

More
$50.57

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Natural Gas Limiter
Genuine Whirlpool part
By: Whirlpool
Part Number: WP694424

If your dryer won't stay lit or shuts off after a few minutes, the gas limiter may be faulty. This regulator controls safe gas flow to the burner.

Do-It-Yourself Stories from Customers like You I needed to convert from lp to natural gas   Mark S. • Raleigh , NC • June 01, 2015

Removed LP Orifice and LP Gas limiter. Orifice was easy, however the gas limiter was the tricky one because I had no instructions to what went where. I could not find anything online as to how to convert from LP to Natural Gas, but you could find several things as to how to convert from Natural to LP. I ended up finding the Dryer schematic on line for the Whirlpool Duet natural gas dryer and was able to figure out what sequence the Spring, regulator and limiter went in. The order I just... Read more

More
$27.37

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Lid Strike
Genuine Whirlpool part
By: Whirlpool
Part Number: WP358684

Washer won't spin or drain? A broken lid strike prevents the lid switch from detecting when the lid is closed. Easy 10-minute DIY fix with basic tools.

This part fixes the following symptoms
  • Will not agitate
  • Will not drain
  • Won't start
  • Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You The spin cycle would not initiate pump to drain tub   Douglas B. • Skull Valley , AZ • January 21, 2017

Ordered new lid switch and plunger. Watched help videos and installed new parts, Washer works like new. Read more

More
$9.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Transmission Shaft Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8577374

Fix washer leaking black water from center shaft with this transmission shaft seal. Prevents liquid from tub entering gearcase. Moderate difficulty repair.

Do-It-Yourself Stories from Customers like You Leaking blackened water.   Devin R. • Clayton , NC • May 04, 2021

We initially thought the issue was the gasket at the base of the tub, but that ended up being okay. We replaced it just in case. In order to even get the agitator off, we had to drill through the agitator bolt. The thing had completely rusted through. inside that basket drive rod we could see that the seals were in poor shape, and the liquid sprayed at the top of the shaft was getting through. We assume this was how the water was getting dirty. We replaced both shaft seals (which meant also... Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488729

This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.

Do-It-Yourself Stories from Customers like You The lint catch was broken   Misti P. • Spokane , WA • January 18, 2019

This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more

More
$7.94

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Clutch Retaining Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10080230

Washer won't spin or leaves clothes wet? This clutch retaining clip secures the clutch assembly for proper transmission engagement. DIY repair.

Do-It-Yourself Stories from Customers like You Washer would not agitate   Robert C. • Newark , DE • September 25, 2014

Took washer apart to find a bad Neutral Drain Transmission. Ordered part from here and fixed with no problems. Read more

More
$7.78

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Dryer Combo Timer
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3952499

If your washer won't advance through cycles, won't drain, or won't spin, the timer may be faulty. Moderately difficult repair requires console removal.

Do-It-Yourself Stories from Customers like You Whirlpool washer/dryer lte5243dq4 not draining nor spinning   Michael D. • Waldoboro , ME • October 18, 2014

First dis-connect the machine from the mains electricity. To replace the timer remove all knobs except washing machine main knob; do not attempt to remove the main washing control knob yet or you'll break it. Remove the two screws and profile plate each side and beneath the control panel then, holding the control panel, remove two bolts at bottom of dryer door then lift dryer door then tip the console plate towards you - it will remain in place, hooked on machine casing. Grasp the main washing... Read more

More
$191.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Neutral Asy Pack
Genuine Whirlpool part
By: Whirlpool
Part Number: 388253A

The Neutral Drain Kit is an OEM part for Whirlpool washing machines. This kit facilitates the neutral drain function, which allows the washer to drain water without spinning the tub, ensuring efficient water removal before the spin cycle begins.

Causes of a bad neutral drain kit can include wear and tear over time, mechanical failure of the components, or damage due to improper installation or handling. A faulty neutral drain kit can lead to draining issues, affecting the overall performance of the washing machine.

Symptoms of a bad neutral drain kit include:

  • Washer not draining properly
  • Extended or incomplete drain cycles
  • Water remaining in the tub after the drain cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Teeth stripped from gear in transmission   Robert G. • Wentzville , MO • June 17, 2015

The parts I purchased from Appliance Parts Pro fit perfectly and were reasonably priced. I received them the next day, which made the Wife (and me) very happy. Although Appliance Parts Pro did not have a repair video for this, I was able to find one online and the machine is washing like new again. The website is well laid out and easy to find what your looking for. Between the available parts and the videos they provide, anyone who is reasonably handy should be able to repair their machine as... Read more

More
$53.72

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Terminal Block Screw Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 279393

Dryer won't power on or has loose power cord connection? This terminal block screw kit secures electrical connections. Easy DIY fix in 15 minutes.

Do-It-Yourself Stories from Customers like You Dryer would not turn on.   Keith K. • Melbourne , FL • May 19, 2020

And after replacing the thermal fuse The dryer turned on. Read more

More
$30.54

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google