We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Color: White. 4oz bottle with brush used for touching up damage to your dishracks. For blue use W10840471. For grey use WP676455. For tips use 675679
Ordered dishwasher rack tine tips and bottle of vinyl touch up paint. I applied the paint to each tine and then placed the tips on the tines. I waited a few hours before using my dishwasher to allow the paint to dry and allow the tips to stick to the tines. Read more
Dishwasher not spraying or making loud buzzing noise? Replace the pump and motor assembly. Moderate DIY repair takes 2-3 hours with basic tools.
1st we took the inside washer arms out and made sure they were clean and not blocked by something . When That failed, I called a local appliance repairman . After 2 messsges and absolutely no return call, I went on line and googled what could cause the problem. It recommended replacing the pump motor assembly . So we decided to try it. Ordered part. Came very fast . I looked up instructions on you tube and we followed this and made the repair . Dishwasher is working correct and dishes are... Read more
Fix dishwasher overflows and leaks with a new float assembly. Controls water level to prevent overfilling. Moderate DIY repair with video guide.
Removed bottom cover, located leak at float switch, removed and replaced float switch kit. The toughest part of the repair was removing the Float & Retainer Assembly (in the interior of the machine tank) which broke when I pushed it back and pulled it straight up as suggested in the service manual. The Float Switch Kit (attached to, and below the float, below and outside the tank) has a folding plastic cover which fastens with plastic clips. If you open the switch kit before removing the... Read more
Dishwasher leaking from bottom or making grinding noise? The sump housing often cracks or wears out. Moderately difficult repair, about 45 minutes.
I noticed the floor around the dishwasher was starting to get wet and warp the wooden floor. The chopper had gotten out of line and had cut a pinhole into the sump housing and the dishwasher was leaking badly. It was quite easy to repair. Just unhook the drain hose and the wire connectors, twist off the turbidity sensor and waste motor, pull out the shims and the whole assemple comes up and out. The hardest part was pulling the motor off of the assembly, since I wasn't sure if I needed to... Read more
If your dishwasher door drops, slams, or feels heavy, the door balance mount may be broken. This side-frame bracket anchors the spring system.
Replaced pump and motor. Read more
Secures water inlet tubing to create a leak-resistant seal. Replace if cracked, stripped, or leaking at the connection. Verify fit with your model.
Dishwasher washer would not drain after hearing glass-like particles during the drain cycle despite trying to clean the cylinder filter. Originally suspected the drain motor was damaged. After watching a video on how to replace the drain pump, I carefully energized the dishwasher (from water and electricity) then removed the dishwasher to take a look. After removal of drain hose from the pump, discovered that drain hose was connected to water inlet assembly which also needed removal to... Read more
This factory-specified screw secures panels, brackets, and internal components in your appliance. Replacing worn or missing hardware restores a tight fit to help reduce vibration, noise, and premature wear.
My son fixed the issue of some wear and tear. Read more
Standing water or dirty dishes? A clogged or damaged pump inlet screen blocks debris from the wash system. Simple DIY fix restores drainage and cleaning.
Looked at Dishwasher. Scratched head and armpit. Told wife I would fix, not repariman. Wife skeptical - shook head. Found schematic on web. Found YouTube video of guy repairing same DW model. Disassembled. Diagnosed problem. Chopper assembly welded in place by water scale -broke removing. Potty mouth. Ordered parts. Waited for parts. Washed dishes by hand. Wife doing ok. Parts arrived (in only a day or two!!! Fed Ex for 7 bucks!! Great deal). Put on nasty t-shirt, baggy shorts. ... Read more
Dishwasher not heating or drying properly? This heater probe shield protects temperature sensors and nearby components from heat damage for accurate sensing.
Replaced spray arms and tube. Found all had debris in them and prohibited water pressure from reaching items. After replacement everything comes out sparkling. Don't understand how the spray arms getting plugged. Almost like waste water is recycled. Turns out to be a very easy project and if needed AppliancePartsPro has information and directions available at your finger tips.! Read more
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Replaced It With New One Read more
12 Ft in length
Read directions on how to change the power cord and watched video on your site on how to change the drain hose. Everything went perfectly. Read more
Size: 1/4 inch hex head, 10-12 x 1/2 inch.
This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy! Read more
Replace your dishwasher's control panel touch pad if buttons are unresponsive, cracked, or worn. Installs on the door panel for full button functionality.
My Maytag dishwasher model # MDB7749AWM2 has a diagnosis routine where you push 'normal wash' then 'heated dry' three times in quick succession. This made the machine cycle through all the functions. This demonstrated to me that all systems functioned. So I came to the conclusion that it was only the lights/buttons that did not work, and I was right. So I ordered a new Panel Control. (I've seen that many more Maytag's use this same part) To replace the Panel Control took 9 minutes. UNPLUG THE... Read more
This factory screw secures panels, brackets, or components within your appliance. Using the correct OEM fastener helps ensure a snug fit and prevents loosening, rattling, or misalignment over time.
Front console touch pad with buttons and indicator lights. Replace if plastic is cracked, screw inserts broken, or surface is worn and unresponsive.
Took the 6 hex screws out and simply unplugged a couple of wires off the control panel. Called appliance parts pros and gave them the part number that was embossed on part. They had it in stock and shipped it. I received it within 3 days. Plug the wires back into the part and replaced the 6 screws. 10 minutes top to repair. Highly recommend you doing this. Would have cost hundreds more if a professional had done this. Thanks !! Read more
Secures access panels and covers to your dishwasher cabinet. Replace this screw if stripped, corroded, or missing to keep panels tight and secure.
I custom cut out a plastic washer to hold the worn screw in place. For months, I added a small strip of duct tape to the screw's threads, which would often stay in tact for a few days. But eventually, the tape would heat up and the adhesive and moisture would cause the spray arm to detach. I found the replacement screw on your web site, and ordered it. The screw was a perfect match and now the spray arm works the way it should. I stil use the plastic washer I made, since the flange replacement... Read more