Mdb7749awm Parts

This thermostat bracket holds the oven or range thermostat securely in place, ensuring accurate temperature sensing and stable oven performance. Replaces a worn or broken bracket to restore proper thermostat positioning. What it does:

• Secures the thermostat assembly to the oven/range interior so the thermostat bulb or probe senses temperature correctly
• Prevents the thermostat from shifting or contacting heating elements
• Commonly replaced when the bracket is cracked, bent, or missing and causes temperature or control issues
• Helps reduce temperature inconsistencies caused by a loose or damaged mounting

• Disconnect power to the appliance before servicing to avoid electrical shock or injury
• Handle the thermostat and sensor bulb carefully; avoid kinks or direct pressure on sensing elements
• Basic hand tools are typically required; verify part alignment before tightening fasteners

This handle grip mounting is the replacement mounting piece that secures a refrigerator/freezer door handle to the door, restoring a solid, correctly aligned handle for normal opening and closing. What it does:

• Secures the handle grip to the appliance door so the handle stays firmly in place
• Replaces cracked, broken, or worn mounting that lets the handle wobble or come loose
• Helps restore proper handle alignment and function for safe door operation
• Fits where the handle attaches to the door; works with the matching handle grip

• Disconnect power or unplug the appliance before beginning any work
• Use basic hand tools; retain fasteners and check fit before final tightening
• Avoid overtightening fasteners to prevent cracking the new mounting

This wire harness is a factory-style electrical assembly that routes power and signals between controls and components to restore reliable operation. It replaces a damaged or worn harness to help eliminate intermittent connections and electrical faults. What it does:

• Carries power and control signals between the control board and appliance components
• Restores reliable electrical connections if wires are frayed, broken, or connectors are loose
• Helps resolve intermittent operation, components that don't respond, or power-related failures
• Maintains correct routing and strain relief to prevent chafing and short circuits

• Disconnect power (unplug or shut off breaker) before beginning any repair to avoid shock or injury
• Verify harness routing and connector orientation match the original during installation
• Replace only with the correct harness to ensure proper connector fit and function

A flat washer used with fasteners on select top-load and front-load washer assemblies to distribute load and prevent loosening. Replaces worn or missing washers to help stabilize mounting points and reduce vibration where metal parts join. What it does:

• Provides a smooth bearing surface between a bolt or nut and the mating part
• Helps distribute clamping force to prevent damage to housings or panels
• Reduces loosening from vibration or thermal cycling
• Common fix when mounting hardware is loose, rattling, or causing leaks at joins

• Inspect mating bolt, nut, and surface for wear or damage before installing
• Use correct size and orientation; do not overtighten fasteners
• Disconnect power to the appliance and follow safety procedures when accessing internal parts
• Replace all related fasteners to ensure proper fit

The Door Hinge (RH) is an OEM replacement part for Whirlpool dishwashers. This hinge is installed on the right-hand side of the dishwasher door, allowing it to open and close smoothly while maintaining the proper tension and alignment. The hinge plays a crucial role in ensuring the door seals securely during operation, preventing leaks and enabling efficient cleaning performance.

Common causes include regular use leading to wear and tear, accidental impacts, or exposure to moisture, which can contribute to rust or corrosion.

Symptoms of a bad door hinge include:

• The dishwasher door not closing completely
• Difficulty opening or closing the door
• A sagging or misaligned door
• Unusual noises when moving the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This manifold routes flow from the appliance's supply to downstream components, restoring proper distribution and reliable performance. Replacing a cracked or obstructed manifold can stop leaks and help resolve weak or inconsistent operation.

• Directs flow from the inlet to the appropriate branches within the system
• Helps maintain correct pressure and delivery to connected components
• Seals at connection points to prevent drips and leaks
• Typical failure signs: visible cracks, leaks at joints, weak output, or intermittent performance

• Disconnect power and shut off the appliance's supply (water or gas, as applicable) before servicing
• Note orientation and transfer any reusable seals, clips, or fittings from the original part if required by your model
• Inspect O-rings/gaskets; replace any that are brittle, flattened, or damaged
• Restore supply and run a test cycle; check all connections closely for leaks

This replacement lever operates the overflow/level switch assembly to help the washer detect and respond to water level changes. It restores the mechanical action that tells the control when the tub is full. What it does:

• Moves the overflow/level switch mechanism so the machine can sense water level correctly
• Helps address overfilling, continuous filling, or erratic fill behavior caused by a worn or broken lever
• Restores reliable engagement between the float/actuator and the switch
• Works as the mechanical linkage for the overflow/level sensing assembly

• Disconnect power and turn off the water supply before beginning service.
• Access typically requires removing the cabinet or control console; keep fasteners organized.
• Install the lever so it aligns with the switch actuator and float linkage; verify smooth movement after assembly.

This door basket is the replacement shelf that mounts to the inside of a dishwasher door to hold small items and organize silverware. It restores secure storage and proper loading on the door for reliable washing. What it does:

• Provides a stable shelf on the dishwasher door to hold small items and cutlery during cycles
• Keeps utensils and small items separated to improve water flow and cleaning
• Replaces cracked, broken or missing door-mounted storage that lets items fall or shift
• Helps maintain proper door alignment and sealing when clipped into place

• One door basket

• Disconnect power to the appliance before beginning any work
• Remove items from the door and open the inner door panel as needed to access mounting clips
• Align the basket with the door mounts and snap or secure it into place; verify it seats firmly

This genuine-style refrigerator door handle provides a secure grip for opening and closing the fridge door and restores the appliance's appearance after a broken or worn handle. Durable finish matches common Whirlpool styling. What it does:

• Replaces a damaged, cracked or loose refrigerator door handle to restore proper door operation and appearance
• Provides a comfortable, sure hand grip for opening and closing the door
• Helps prevent further cabinet or door damage caused by using a compromised handle
• Fits the OEM mounting points for a clean, factory-like fit

• Use basic hand tools; disconnect power only if panels or lighting need removal for access
• Support the door while removing/installing to avoid strain on hinges or other components
• Keep fasteners and trim pieces organized to ensure correct reassembly
• Replace any damaged clips or screws with OEM parts to ensure secure mounting

Color: White. Size: 1 qt. can. Acrylic appliance paint.