Mdb8h945awb Parts

Color: Gray

This vent seal fits at the appliance control panel to block gaps and stop drafts, helping keep lint, dust and moisture out of the control area for cleaner operation and improved safety. What it does

• Seals the gap between the control panel and cabinet to prevent air leakage and drafts.
• Helps keep lint, dust and moisture out of electrical and control components.
• Can reduce visible airflow or draft coming from the control area.
• Useful when a worn or damaged seal allows debris or excess air into the control cavity.

• One vent seal for the control panel.

• Disconnect power to the appliance before starting any repair.
• Remove the control panel per OEM instructions to access and replace the seal.
• Ensure the mating surfaces are clean and dry; press the seal into place for proper fit.
• If any fasteners or clips are damaged, replace them; do not force a misfitting seal.

This thermostat bracket holds the oven or range thermostat securely in place, ensuring accurate temperature sensing and stable oven performance. Replaces a worn or broken bracket to restore proper thermostat positioning. What it does:

• Secures the thermostat assembly to the oven/range interior so the thermostat bulb or probe senses temperature correctly
• Prevents the thermostat from shifting or contacting heating elements
• Commonly replaced when the bracket is cracked, bent, or missing and causes temperature or control issues
• Helps reduce temperature inconsistencies caused by a loose or damaged mounting

• Disconnect power to the appliance before servicing to avoid electrical shock or injury
• Handle the thermostat and sensor bulb carefully; avoid kinks or direct pressure on sensing elements
• Basic hand tools are typically required; verify part alignment before tightening fasteners

This toe-panel insulation replaces the foam liner behind the appliance toe kick to help maintain cabinet insulation and reduce drafts. It restores proper airflow and thermal protection under the unit for more consistent operation. What it does:

• Provides thermal insulation for the cabinet base to help reduce heat loss and drafts
• Helps maintain proper airflow around the compressor and components beneath the appliance
• Can reduce the likelihood of cold floors or localized temperature changes near the toe kick
• Restores damaged or missing insulation that may affect efficiency or appliance comfort

• Disconnect power to the appliance before beginning service
• Remove the toe kick/grille and old insulation to access the cavity; handle metal edges with care
• Trim or fit the new insulation as needed for a snug placement; use OEM fasteners if originally present

This dispenser cover (shield) replaces the plastic trim that surrounds a refrigerator's dispenser opening, restoring a clean finished look and helping direct water or ice into your cup. Fits where the dispenser meets the cabinet face. What it does:

• Covers and protects the dispenser opening, preventing chips and cosmetic damage
• Helps guide water and ice into cups for more accurate dispensing
• Hides internal dispenser components for a finished appearance
• Can reduce direct contact with moving dispenser parts

• One dispenser cover (shield)

• Remove power to the appliance before servicing to avoid electrical or injury risk
• Typically installs by snapping into place or fastening with a few screws; keep hardware if reusing
• Inspect surrounding trim for damage and replace any broken clips or screws for a secure fit

This flexible injector hose routes liquid between the appliance's injector/dispenser and the pump or spray assembly, restoring proper dispensing and preventing leaks. It's a direct-replacement service part for affected injector connections. What it does

• Carries water or detergent solution from the injector/dispenser to the pump or spray assembly
• Restores normal dispensing when the original hose is cracked, split, or clogged
• Prevents leaks that can cause puddling or improper wash cycles
• Helps restore consistent flow so detergent and rinse/cleaning agents reach the tub

• One injector hose

• Disconnect power and shut off the water supply before starting
• Remove the old hose and reuse or replace any clamps or fittings as needed; install the new hose onto the same connection points
• After installation, restore power/water and run a short cycle to check for leaks and correct dispensing

This ball bearing helps support a rotating appliance assembly to reduce friction and enable smooth operation. Replacing a worn bearing restores quieter rotation and helps prevent further wear on adjoining parts. What it does:

• Supports and centers a rotating shaft or drum to maintain smooth movement
• Reduces friction between moving metal components for efficient operation
• Can cause squealing, grinding, rubbing or excessive vibration when worn
• Restoring the bearing can stop noise and improve rotation stability

• Disconnect power and follow before beginning any repair
• Use correct tools and replacement procedures to avoid damage to the bearing housing or shaft
• Inspect adjacent seals, shafts, and mounts when replacing the bearing and replace any damaged parts

This handle grip mounting is the replacement mounting piece that secures a refrigerator/freezer door handle to the door, restoring a solid, correctly aligned handle for normal opening and closing. What it does:

• Secures the handle grip to the appliance door so the handle stays firmly in place
• Replaces cracked, broken, or worn mounting that lets the handle wobble or come loose
• Helps restore proper handle alignment and function for safe door operation
• Fits where the handle attaches to the door; works with the matching handle grip

• Disconnect power or unplug the appliance before beginning any work
• Use basic hand tools; retain fasteners and check fit before final tightening
• Avoid overtightening fasteners to prevent cracking the new mounting

This loose bag assembly is a direct-fit replacement designed to restore the original containment or collection function in compatible Whirlpool appliances. It provides a simple swap to fix a damaged or missing bag and keep the appliance operating as intended. What it does:

• Replaces a worn, torn, or missing bag used for containment or collection in the appliance
• Restores proper collection and helps prevent debris or material from escaping into the appliance cavity
• Helps reduce related performance issues that occur when the bag is damaged or absent
• Matches OEM form and fit for an easy, reliable replacement

• One loose bag assembly as shown

• Turn off and unplug the appliance before attempting replacement
• Remove any panels or components required to access the bag
• Install the bag in the correct orientation and secure all fasteners or clips
• Inspect surrounding seals and openings; replace any damaged parts to ensure proper operation

This wire harness is a factory-style electrical assembly that routes power and signals between controls and components to restore reliable operation. It replaces a damaged or worn harness to help eliminate intermittent connections and electrical faults. What it does:

• Carries power and control signals between the control board and appliance components
• Restores reliable electrical connections if wires are frayed, broken, or connectors are loose
• Helps resolve intermittent operation, components that don't respond, or power-related failures
• Maintains correct routing and strain relief to prevent chafing and short circuits

• Disconnect power (unplug or shut off breaker) before beginning any repair to avoid shock or injury
• Verify harness routing and connector orientation match the original during installation
• Replace only with the correct harness to ensure proper connector fit and function

Includes 6` Stainless Steel Braided Hose, Power cord & Connectors

Color: Dark Gray