Need Help?
Call or text
Fastening screw for securing components inside appliances. Replaces lost, stripped, or damaged screws during repairs or part installations.
Bought and installed new hinges. Repair took about an hour but I also cleaned all the glass inside and out on both oven doors. I had ordered extra screws as I read the old ones that hold the hinges were hard to get in as they were self taping but the screw labeled 5 next to the hinge were not the right ones. All old screws worked fine. You just need to put a little power to them to get them started. Easy repair. Read more
Auxiliary burner head for gas ranges and cooktops. Mounts over the orifice to distribute gas through precision ports. Replace if clogged or damaged.
Color: chrome. It measures about 21 inches wide by 17 inches deep.
No work needed. Read more
Burner won't ignite or flame is weak? This orifice holder aligns the burner orifice and electrode for reliable ignition. Moderate DIY, 30-60 minutes.
The top had to be removed but with the unit being 14 years old, galvanic corrosion had seized the screws holding the Burner Heads to the Orifices. I carefully drilled out the heads of the screws until the Burner heads could be pulled free. I removed the two screws that held the Burner control assembly with all the gas valves in place. If you open the top oven, there are two last screws that thread straight up into the top. So 14 screws in all. I ordered 10 new screws along with the Orifices... Read more
Anti-tip bracket bolts to the floor behind your range to prevent tipping. Replace if missing, bent, or damaged during moving or installation.
Part arrived quickly and was an easy install1 Read more
Broiler won't light or takes too long to ignite? This range broil burner igniter provides the spark to light your oven's broil flame. DIY install.
This range is 12 years old. We noticed it would take 10 minutes to start heating up. A YouTube search revealed this a common problem with this Maytag range. I decided to replace all three ignitors as all behaved similarly. Took about an hour and a half- only because my hands do not work as well as they used to. I pulled the range, disconnected the gas and electric and swapped out the parts. Everything working like new. I went with OEM- I did not want to mess with connections Read more
Fix inaccurate oven temperatures or heating issues with this temperature sensor. Measures cavity heat and signals the control board. Easy DIY repair.
Replaced igniter with new one from AppliancePartsPros.com. The repair was easy following the video from their website. A few things were a little different but was able to figure it out. Also was warned that there might be wire nuts instead of a connector. Which there was but just cut and stripped the wire. Oven is like new again. Read more
Restores a tight seal between your oven door and frame to prevent heat loss and maintain accurate cooking temperatures. Replace if worn or damaged.
Replaced the gasket. Very easy and only a few minutes. Read more
Burner head sits on the base and distributes gas through precision ports for even flame. Replace if cracked, clogged, or corroded for proper ignition.
My husband did an awesome job replacing the burner. Read more
The Orifice Holder is an OEM part for Whirlpool gas ranges. It includes the spark electrode and the 9.2k orifice, which are essential components for proper ignition and gas flow in the burner assembly.
Causes of a faulty orifice holder can incl
I had to drill out the screws that hold down the burner plates which also mount to the orifice holders because all of the screws had rusted tight and could not be loosened. The drilling out part was fairly easy and once I had removed the burner plates, I could easily lift the stove top off and get access to the orifice holders to replace all of them. I purchased new stainless steel self-threading screws from our local hardware store and re-assembled the new orifice holders and existing burner... Read more
Fix continuous sparking ignition caused by debris entering switches. This control knob grommet seals the panel opening around the valve shaft. 5-minute install.
Replaced the knob Read more
Burners won't spark or ignite? This igniter switch assembly restores reliable ignition to gas burners. Most DIYers complete this repair in 20-30 minutes.
A few weeks back, when shutting off a burner, the igniter started sparking and wouldn't stop. Working the knobs and jiggling them got it to stop. Fast forward a few weeks. Finish cooking, go sit down to eat. Hear snapping noise, go look, see burners are all off and the igniters are all sparking. Jiggle the knobs. Poof! Flames come out the top one! What a stink. Unplugged stove, finished dinner. Loosened the cooktop and investigated. Ordered switch. Two days later, part arrives. Two screws... Read more
Oven light not working or dim? This light lens cover shields the bulb from grease and heat, restoring clear illumination. Quick snap-in replacement.
Secures the center burner orifice on gas ranges for proper alignment and consistent flame. Replace if worn or damaged to restore burner performance.
Fix gas smell or burner ignition issues with this range top burner valve. Common repair for leaking gas odor when range is off. Moderate difficulty.
I replaced the Igniter switch, two control valves and one holder/orifice (because I couldn't get the screws out and decided to just replace it rather than re-tape it and get new screws). The one thing I forgot was I have propane and the orifice was for natural gas. Fortunately, I was able to swap out the orifice from the old holder. Read more
Color: White. For black order WP98008545. For biscuit order 98008169.