Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Water Temperature Sensor is an OEM part for Whirlpool washing machines. This sensor ensures the water is reaching the proper temperature at each stage of the wash cycle. Note: The sensor does not include the seal W11590578. Order separately if needed.
Causes of a bad temperature sensor can be failures over time due to mechanical wear, thermal stress on electronic components, or damage from leaks/flooding inside the unit.
Symptoms of a bad water temperature sensor include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Replace the water temperature sensor and still had the error code. While I had the back of the machine open I ran the washer. I traced the black wires from the temperature sensor and wiggled them as the washer was running. At one zip tie every time i moved the wires the washer would stop running and the error code would flash. Sure enough, like many others posted, the vibration from the machine had split the wire. I spiced the wire back together and have not had a problem since. Read more
The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.
Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
We ordered parts from appliance parts pros and I fixed it. Read more
This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more
Fix F20 error codes and water level issues with this pressure switch hose. Connects sensor to tub for accurate water level detection. Easy 30-min repair.
Several months back, I checked the supply hoses and replaced the hot water hose because of corrosion. The cold water hose was fine. I replaced the water inlet valve and that seemed to fix the problem, but after about a week, the problem resurfaced. After searching various internet resources, I though the pressure switch which detects the water level could be bad. I order both the pressure switch and the hose that connects it to the air chamber. Before installing the new pressure switch, I... Read more
Replace your washer's drive pulley if worn, wobbling, or has damaged mounting flats. Installs on the tub shaft to transfer belt motion to the drum.
I pulled the unit away from the wall and noticed black dust on the floor. Unplugged the unit, turned off the water. Removed back panel (about 10 screws with Torx heads) and noticed the belt was off, the drive pulley was loose and wobbling on the shaft, black dust all over the inside. Belt was worn along one side. Some grooves/damage in the outer drum casing around the pulley where it appeared the belt had rubbed. Removed the lower crossbar (2 more screws) to get better access to the drive... Read more
This motor control board regulates the washer's drive motor, controlling spin speed and direction during wash and spin cycles. It is typically mounted near the bottom of the washer behind the front or rear access panel. Replace this board if the washer won't spin or agitate, stops mid-cycle, or if the motor runs erratically or not at all.
After much reading on line regarding my problem. I decided to do any test that I could to try to diagnose and fix this myself if I could. This took a lot of time and patience to get the answers on how to go about this from "experts" as some of the info was contradictory. I was almost about to give up and buy a new washer with less electronic parts and buttons as advised by an honest appliance technician . I tried one more thing first which was to disconnect the lead wires connected to the MCU .... Read more
Rubber vent hose that connects the wash tub to the dispenser, allowing air circulation. Replace if cracked, leaking, or detached from the tub assembly.
Removed the leaking hoses and seal. Installed the new ones. They all fit perfectly. The disassembly/reassembly of the washer took the most time. Read more
Replaces a cracked, broken, or missing washer drum baffle. Installs inside the wash basket to lift and agitate clothes during the wash cycle.
I called parts pro and they had my part and sent it right to me I am soooooooo happy with this company they are amazing. I only ordered 1 baffle and now I'm calling them to order the other 2 baffles. Thank you so much for your help and service. Read more
This rubber seal fits around the detergent or fabric softener dispenser housing on a front-load or top-load washing machine. It creates a watertight barrier that prevents water from leaking out of the dispenser area during wash and rinse cycles. Replace this seal if you notice water leaking from the dispenser, see visible cracks or deterioration in the rubber, or find detergent residue building up around the dispenser housing.
I ordered the dispenser and the distribution nozzle since the old one was in bad shape. I also replaced the boot since I had to take the entire machine apart and it is 20 years old. I watched your videos on you tune to learn what to do. I recently lost my job and really could not afford to hire someone to fix my washer. I have to say it wasn't that hard to do and my wife was so happy that I was able to fix it myself! I probably saved $200 or $300 in service calls and labor on top of what they... Read more
Size: 5 foot long. Rubber fill hose used on most automatic washing machines. Two hoses used per machine.
Replaced flow meter and control valve Read more
Routes wastewater from your washer to the household drain. Replace this hose if cracked, kinked, clogged, or leaking at connections to restore proper drainage.
Prior to ordering parts I had pulled the pump strainer basket and cleaned it out. There was both soft and hard scale build up. The tub-to-pump hose was also pretty crusty/slimey. Still got warnings for SUDS and repeated F02 errors. Ordered parts and replaced the pump, tub-to-pump hose, interior drain hose and exterior drain hose (both hoses has some slime build up). The water standing in the tub when I emptied it the first time had very little suds but we kept getting the SUDS warning. ... Read more
Replace your washer drive belt when you notice spinning issues, loud noises, or burning smells. This belt connects the motor to the drum for proper rotation.
Tub bearing failure, basically the whole machine has to be taken a part. I've used appliancepartspros in the past so I came back. Quick shipping, parts ordered Thursday night and got here Monday. Take your time or you'll just cost yourself more money. I was lucky in that I did not have to buy the $568 inner tub because I found a bearing and seal kit on Amazon for $80. Historically appliancepartspros' website has been very accurate indicating in stock or not. It appears those days are gone. I... Read more
Connects detergent dispenser to wash tub for proper filling. Replace if cracked, leaking, or causing water pooling. Verify fit with your model number.
Water seemingly leaked from the top left area of the machine... trickling down and gathering in the middle of the front counterweight... then to the bottom chassis eventually to the floor. I thought out of an abundance of caution to replace not only the tub seal (most likely culprit) but also the hose and seal from the detergent compartment while everything was open and exposed. Followed the replacement steps (used a few different videos to get other opinions and tips before I started). Went... Read more
Factory mounting screw secures panels, brackets, hinges, and covers on your washer. Replace missing, stripped, or rusted screws to restore secure fit.
The replacement part and YouTube video allowed me to repair my washer in less than 10 minutes. Read more
This exhaust hose carries drain water from the pump to the external drain connection on your washer. Replacing a worn or damaged hose restores proper draining and helps prevent leaks and musty odors.
I temporarily fixed the hole with electrical.tape until I received my part from appliancepartspros. I then made the required repair. Read more
Securely mounts your dryer above your washer to save floor space. Includes brackets, adhesive pads, and hardware for safe installation. Replaces lost kits.
I ordered a stack kit according to the model numbers on the washer and dryer and the kit worked perfectly. My washer and dryer are now stacked and I am extremely satisfied with how easy it was to order from this website and the quick delivery of my part. Thank you! Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.