Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Mvwx500xw Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Washer Lid Lock Bezel
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10392041

Plastic trim bezel that mounts around the lid lock on your top-load washer's panel. Replace if cracked, broken, or missing to restore a clean finish.

Do-It-Yourself Stories from Customers like You Lid lock broke   Ken K. • Los Angeles , CA • December 11, 2015

Put in new lid lock. This is my second one in 1 year. Whirlpool suggested I leave it loose so that if somebody did try and force it open, it wouldn't break it. This lid lock has 4 wires and cannot be bypassed. Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Console Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8312709

The Console Clip is an OEM part compatible with Whirlpool dryers. This clip secures the control console assembly to the top panel, ensuring it is firmly mounted during operation. Properly functioning clips are necessary to maintain the correct alignment of controls and prevent detachment. 

Causes of a bad clip can include wear and fatigue from repeated opening and closing of the dryer door. Excessive force or impact could also bend or break the clip over time.

Symptoms of a bad clip include:

  • Loose console assembly that is not securely fastened  
  • Misaligned or dangling controls that do not sit flush
  • Dislodged console at risk of detaching from housing
  • Missing clip leaving an open mounting point

This OEM Whirlpool replacement clip is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You My kenmore washer model 11029828801 was agitating during the fill cycle and the tub would only partially fill also at the end of the spin cycle rinse water was spraying in resoaking the clothes   Jay S. • Hammond , IN • February 07, 2017

I read the FAQ section of Appliance Pros parts web site. I found out I needed to replace the temperature control switch, WPW10248240, to correct my problem. This switch also controls the tub filling water level based on air pressure via the attached vinyl tubing. I ordered the switch and the tubing, WP353255, in case mine was no longer any good, and I also ordered the retaining clips for the control cabinet, (2) of WP8312709, because they can be damaged when accessing the controls. My new... Read more

More
$20.38

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Washer Drive Motor
Genuine Whirlpool part
By: Whirlpool
Part Number: W10832724

Washer won't spin or agitate? A faulty drive motor causes humming noises and stopping mid-cycle. This direct replacement restores drum rotation.

Do-It-Yourself Stories from Customers like You F7 E5 F7 E6 Maytag washer wasn't starting past sensing and wouldn't' spin at all   Andrew Z. • Desert Hot Springs , CA • September 08, 2018

Figured out how to diagnose it and found the error codes, all online! learned how disconnect everthing and laid the washer down on its back, saw the 2 malfunctioning pieces, The Drive motor and the shift actuator, removed them and looked up model numbers, found the parts I need here on appliance parts pros and was able to order them and have them delivered in 2 days. Super awesome as it took me maybe 5 minutes attaching everything back to where it went. I ran diagnostics again to see if there... Read more

More
$175.51

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Lid Bumper
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9724509

These lid bumpers are sold individually.

Do-It-Yourself Stories from Customers like You Water pump after 18 years wore thru the pvc housing causing a pin hole leak   James B. • Palomar Mountain , CA • April 13, 2014

Found AppliancePartsPros on-line. Sent us the manual, parts list, etc. via .pdf files. Our local guy did not. Had parts in stock, two day shipping, totally painless. The parts were approximately 1/2 the price the local guy wanted. OEM parts. Perfect fit on replacement. The Whirlpool is so well made, it was very easy to repair. It has several items, over the years, which failed. In all cases, repair was painless with a few common hand tools and a tad of patience. AppliancePartsPros had... Read more

More
$7.48

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Washer Transmission Gearcase Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: W11132267

Fix loud grinding noise or basket won't spin issues. This washer transmission gearcase drives the agitator and basket rotation. Moderate DIY repair.

Do-It-Yourself Stories from Customers like You Whirlpool cabrio wtw5500xw0 transmission gearcase failure   John H. • Fort Polk , LA • February 28, 2017

Symptoms: Machine was spinning and spitting a dark colored oil in a circular pattern on the floor under the machine. No strange noises, just messy. Researched issue, Gear-case bad, seal deteriorated and not preventing water from entering gear-case. The additional cam, belt etc I had replaced due to the amount of oil and transmission residue attached to them. Ordered parts, EVERYTHING parts-wise that is needed is included in gear-case package. **NOTE: You WILL need to get a whirlpool spanner... Read more

More
$206.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10109200

This replacement screw secures panels, brackets, and other components in your appliance to keep them aligned and rattle-free. Replacing worn, stripped, or missing hardware restores a tight fit and helps maintain safe, quiet operation.

  • Fastens panels, brackets, or internal parts to the cabinet/frame
  • Helps maintain alignment to reduce vibration and rattling
  • Replaces lost, stripped, or corroded screws
  • Common symptoms: loose panels/trim, rattles, or a screw that won't tighten
What's included: One screw. Install notes:
  • Disconnect power; shut off water or gas if applicable
  • Match thread and length to the original; replace one at a time to keep alignment
  • Start threads by hand to avoid cross-threading; use the correct driver
  • Tighten snugly—do not overtighten, especially into plastic or thin sheet metal

Do-It-Yourself Stories from Customers like You Missing baffles   Anna S. • Shoreview , MN • January 31, 2016

I ordered two replacement baffles and screws, then lifted the top of the dryer to access the drum and installed the two new baffles. Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Washer Water Fill Hoses
By: Pro
Part Number: TJ725RBFFP

Replacement water fill hoses for washing machines. Connect home water supply to washer. Replace when cracked, leaking, or showing rubber wear or corrosion.

Do-It-Yourself Stories from Customers like You Washer would not spin nor adgitate   Jeff A. • Stow , OH • June 28, 2015

Motor control board was flashing 4 times, indicating that the mode shifter had an error. I disconnected the mode shifter's wire from the controller and measured the resistance between the 2 leads with an ohmmeter. Since the reading was infinite, that meant that the mode shifter coil or in-line thermal sensor was electrically open, i.e. bad. As this fix is near a complete tear-down of the washing machine, here are a few tips I discovered. 1) the hub nut is difficult to remove and you need a... Read more

More
$13.71

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Dispenser Housing With Water Inlet Valve Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: W11158805

This assembly includes the dispenser housing along with integrated hot and cold water inlet valves for a top-load or front-load washing machine. It controls the flow of water into the machine and routes it through the detergent and fabric softener dispensers. Replace this assembly if the washer is not filling with water, fills slowly, leaks at the inlet connections, or if the dispenser is not properly directing water to the wash tub.

Do-It-Yourself Stories from Customers like You Maytag bravos washer loud "whining" noise while filling with h2o   Alex M. • Minneapolis , MN • March 08, 2017

Maytag Bravos Washer, Model #MVWX550XW1 My washer was emitting a loud noise - I describe it as a loud whining noise - while filling with water. The noise seemed to be coming from the fill valve assembly: 1) jiggling the supply hoses changed the inflection of the noise, 2) turning on the faucet in the adjacent laundry tub (thereby reducing the water supply pressure) also diminished the intensity of the whining noise. I ordered and installed this part - No. AP6023337 "Housing". The installation... Read more

More
$148.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10273971

This factory screw secures panels, brackets, and other components in your appliance. Replace a missing, stripped, or corroded fastener to restore a tight fit and keep parts properly aligned and rattle-free.

  • Secures appliance components and panels in their mounting points
  • Replaces damaged, stripped, or missing hardware
  • Helps reduce rattling or vibration from loose parts
What's included: One screw Install notes:
  • Disconnect power; shut off water or gas supplies if applicable
  • Match location with the original screw; start threads by hand to avoid cross-threading
  • Tighten until snug; do not over-torque, especially into plastic or thin metal
  • Reinstall any covers or panels and test for secure fit

Do-It-Yourself Stories from Customers like You E3 F5   Stacy J. • Elk Grove , CA • August 03, 2018

In the past we’ve fixed the latch with just high speed great. This time we ordered a new latch and replaced it. Washing machine has been working perfectly ever since. It was very easy to find the right part by simply entering the model number of my washing machine. It was quick delivery and the correct part. Very happy to have a working washing machine again. Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Drain Pump Filter
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10215093

Washer won't drain or clothes have residue? Replace the drain pump filter that screens debris and prevents clogs. Protects pump from damage.

Do-It-Yourself Stories from Customers like You The gears were rusted and stripped in the transmission and the hub was cracked.   Blane L. • Columbus , OH • January 11, 2019

On a 3 year old Maytag...........New gear case and hub installed. The videos produced by AppliancePartsPros are quite helpful, even though the video was not of the exact make and model number I was repairing, the similarities were so great that it may as well have been the same make and model number (whirlpool and Maytag essentially make the same thing and slap I different sticker on them) Read more

More
$53.21

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Washplate Impeller
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10553968

Clothes not getting clean or washplate spinning freely? Stripped plastic splines prevent agitation. DIY fix in 15 minutes—remove cap and bolt, lift out.

Do-It-Yourself Stories from Customers like You Washplate wouldn't agitate clothes   James B. • Baldwinsville , NY • August 17, 2015

The plastic ridges on the inside of the washplate were stripped. New washplate solved the problem. This washer is barely 3 years old, so I guess I can expect to be doing this again, but better than buying a new washer. Read more

More
$131.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Drain Hose Extension Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: DRNEXT4

Extends your washer's drain hose to reach distant standpipes or sinks. Includes coupler and clamps. Replace when you need extra length for installation.

Do-It-Yourself Stories from Customers like You Washer drain hose was too short to reach drain   Steve D. • Chamblee , GA • July 14, 2014

Attached drain hose extension and it more than reached the drain. Read more

More
$48.57

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Appliance Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8281163

Replacement screw for securing panels, brackets, and internal components. Replaces missing, stripped, or damaged fasteners to restore proper fit.

Do-It-Yourself Stories from Customers like You Whirlpool wtw5000dw1 top loader door would not lock, spin cycle would not function   John C. • Cornelia , GA • December 24, 2021

Replaced door latch and switch. Parts are plastic so you must know what you are doing to avoid breaking new parts. Videos were hard to find for my model - eventually I found a video that addressed a different problem but required disassembly of a washer cabinet similar to mine. I removed the control panel using a putty knife and unplugged the wire to the latch switch. Then I remove 3 screws securing the washer's top panel to the back panel. Using a rubber mallet, I gently knocked the top panel... Read more

More
$9.05

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489069

Size: 1/4 inch hex head, 10-12 x 1/2 inch.

Do-It-Yourself Stories from Customers like You Broken handle foot pedal and missing parts   Donald M. • Lake Arrowhead , CA • April 05, 2015

This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy! Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Retaining Nut
Genuine Whirlpool part
By: Whirlpool
Part Number: W10759923

Replacement retaining nut for washers and dryers. Secures components like pulleys, shafts, and assemblies. Order a new nut if yours is stripped or missing.

Do-It-Yourself Stories from Customers like You Would not go into spin cycle automatically   Daniel H. • Marlborough , MA • March 01, 2015

Have had this experience before. Ordered the same parts as last time plus a few more related components. Performed the repair in under an hour. All is good. Read more

More
$4.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Drain Hose Extension
Genuine Whirlpool part
By: Whirlpool
Part Number: 285863

Extends the drain hose approximately 4 feet. You must also order a drain hose connector kit: 285835.

Do-It-Yourself Stories from Customers like You Washer drain hose not long enough   Ray P. • Frankfort , IL • February 07, 2016

I ordered the drain extension kit and the hose connector kit. Read more

More
$31.59

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google