Psc23mgtd Parts

The Temperature Sensor Seal is an OEM part for GE refrigerators. This seal is designed to protect the temperature sensor from moisture and other environmental factors that could affect its accuracy and longevity. By providing a barrier against the harsh conditions within a refrigerator, such as humidity and temperature fluctuations, this seal ensures that the sensor can accurately monitor and control the refrigerator's internal temperature.

Causes of a malfunctioning Temperature Sensor Seal can include wear and tear over time, degrading the seal's effectiveness. Physical damage like tears or punctures can allow moisture to reach the sensor. Improper installation may leave gaps or loose areas around the sensor, compromising the seal.

Symptoms of a bad Temperature Sensor Seal include:

• Inaccurate temperature readings.
• Condensation or frost near the sensor location.
• Frequent cycling or unusual patterns in the refrigerator's cooling process.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drain Tube is an OEM part for GE refrigerators. It is responsible for directing defrost water to the drain pan located beneath the appliance, where it can evaporate safely. 

Causes of a bad drain tube can include blockages from debris or ice, physical damage such as cracks or splits that allow water leakage, or a disconnection from its fitting points due to improper installation or material fatigue.

Symptoms of a bad Drain Tube include:

• Water pooling at the bottom of the refrigerator compartment
• Ice accumulation in or around the freezer area
• Leakage of water onto the kitchen floor beneath the refrigerator

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Auger Motor is an OEM part for GE refrigerators. This part drives the auger in the freezer's ice dispenser mechanism. This motor is vital for the smooth operation of the ice dispenser, enabling it to deliver ice cubes or crushed ice through the dispenser chute upon demand.  

Over time, the auger motor can wear out or sustain damage due to normal use, leading to a decrease in performance or complete failure.  

Symptoms of a malfunctioning Auger Motor include:

• The ice dispenser failing to dispense ice
• Only crushed ice being dispensed, irrespective of the selection
• Loud or unusual noises emanating from the ice dispenser when in use
• The auger failing to rotate when the ice dispenser lever is engaged

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Crisper Cover is an OEM part for GE refrigerators. It serves as a lid for the crisper drawer, helping to maintain optimal humidity levels for storing fruits and vegetables. 

Causes of a bad crisper cover can include accidental impact, overloading the refrigerator shelves, or general wear and tear over time.

Symptoms of a bad crisper cover include:

• Cracks or breaks in the cover 
• Difficulty opening or closing the crisper drawer 
• Reduced effectiveness in maintaining humidity levels 
• Glass insert falling out or not fitting properly 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Fresh Food Door Gasket is an OEM replacement part for GE refrigerators. It forms an air-tight seal around the fresh food door preventing air and moisture exchange between the refrigerator interior and exterior. The gasket helps to maintain the ideal temperature and humidity levels inside for optimal food storage.

Causes of a bad gasket can include cracks, tears, or worn-away sections compromising the air-tight seal over time. Exposure to heat, moisture, or chemicals during cleaning may also degrade sealing qualities.

Symptoms of a bad gasket include:

• Cool air leaking from around the door
• Interior surfaces becoming wet or frosty
• Difficulty maintaining proper interior temperature settings

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This air damper assembly regulates the flow of cold air from the freezer into the refrigerator compartment to keep temperatures even. Replace a stuck or broken damper to restore proper cooling and prevent warm spots or food freezing.

• Controls and meters airflow from the freezer to the fresh food section
• Opens and closes in response to temperature control signals to maintain set temperatures
• Helps balance cooling across shelves and drawers for consistent performance
• Failure symptoms include: refrigerator too warm, items freezing in the fresh food section, temperature swings, or clicking/buzzing from the damper area

• Disconnect power before servicing; remove food and shelves to access the damper area
• Remove the damper cover/grille; take out mounting screws or clips and withdraw the assembly
• Position the new assembly squarely in the air channel; reconnect any harness and reinstall covers
• Restore power and allow the refrigerator to stabilize before final temperature checks

The Ice Deflector Spring is an OEM replacement part for GE refrigerators. This spring is a crucial component of the ice dispensing system, specifically in selecting between crushed and whole ice cubes. It is designed to always force the diverter back in a way that the cubes get crushed. When whole cubes are selected, the solenoid pulls the lever against the spring’s tension to shift the configuration, allowing cubes to bypass the crusher blades.

Causes for a malfunctioning Ice Deflector Spring can include wear and tear from regular use, corrosion due to constant exposure to moisture, or mechanical failure that prevents it from effectively reverting the diverter to the crushed ice configuration.

Symptoms of a bad Ice Deflector Spring include:

• The ice dispenser only dispensing whole cubes, even when crushed ice is selected
• The diverter not returning to the crushed ice configuration
• Unusual sounds during the ice dispensing process
• The need for manual intervention to get crushed ice

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Color: Black

This evaporator fan motor dust cap is an authentic OEM replacement part found on refrigerator and freezer fan motors. This dust cap prevents the fan motor bearing and housing from being damaged by dirt and debris. If the dust cap is cracked or broken, the fan may make loud squealing noises. If the dust cap is not removed and replaced, the fan could stop working and ultimately cause the refrigerator's temperature to be affected. To start, disconnect the power and water to the refrigerator. Remove food from the freezer so that the back panel of the freezer can be accessed to reach the fan. Remove the ice maker and set it outside the freezer. Disconnect the fan and take it out of the freezer to expose the fan's shaft and the dust cover. Pry the dust cover off and install the new one. Replace the fan and cover. Reconnect the wires and reinstall the icemaker. Put the food back in the freezer. Reconnect the power and water.The evaporator fan motor dust cap is a white plastic part that is sold individually. This dust cover is made for use in refrigerators manufactured by General Electric, Hotpoint, and Kenmore.

The Shelf Stop is an OEM replacement part for GE refrigerators. The shelf stop in your refrigerator is what locks the shelf into the refrigerator liner.The shelf stop features a small protruding nub that fits into pre-cut slots in shelf supports, preventing shelves from being inserted too far. 

Causes of a bad shelf stop can include wear over many years of shelf adjustment, or damage from impact with shelves.

Symptoms of a bad shelf stop include:

• Shelves no longer fitting tightly or sitting flush in walls
• Ability to insert shelves further than intended design position
• Shelves shifting positions or becoming loose during use

This is a genuine OEM part that works for some models of GE, and Hotpoint models.

The Screw is an OEM part for GE refrigerators. It serves a crucial function in securing and allowing smooth operation of the refrigerator's drawer rollers.

Causes of a bad or missing screw can include accidental loss during repair or maintenance, stripping of the screw threads due to overtightening, or general wear and tear over time.

Symptoms of a loose or screw include:

• Loose or wobbly refrigerator drawer
• Difficulty opening or closing the drawer smoothly
• Scraping or grinding noises when operating the drawer
• Drawer coming off the track or rollers entirely

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replace a cracked or jammed ice bin with this bucket and auger assembly. It stores the ice and uses the auger to move it toward the dispenser chute, restoring smooth, reliable through-the-door ice dispensing.

• Holds harvested ice in the freezer compartment
• Auger engages the drive to move ice toward the dispenser chute
• Helps restore consistent ice delivery through the door
• Typical symptoms: no ice dispensing, weak or intermittent dispense, cracked/broken bucket, grinding or clicking during dispense

• Unplug the refrigerator before servicing
• Empty the old bin and pull the assembly straight out
• Align the rear auger coupling with the drive and seat the assembly fully
• Briefly test the dispenser to confirm proper auger engagement

This helix is the plastic spiral inside the refrigerator's ice bucket that works with the auger to move ice toward the crusher and dispenser. Replacing a worn or broken helix restores smooth ice dispensing and reduces jams.

• Surrounds the auger shaft in the ice bucket to advance cubes toward the crusher/chute
• Engages when the dispenser is activated to feed ice consistently
• Replace if cracked, stripped, or warped
• Symptoms may include little or no ice dispensing, intermittent dispensing, or grinding noises from the bucket

• Unplug the refrigerator and wear cut-resistant gloves; crusher blades are sharp
• Remove and empty the ice bucket; note the order/orientation of blades, spacers, and washers during disassembly
• Transfer components to the new helix in the same sequence; reuse existing hardware
• After reassembly, verify the auger turns smoothly by hand before reinstalling and testing

The Ice Stripper is an OEM Replacement Part designed for rear-mount icemakers in GE refrigerators. This part measures approximately 7.25 x 2.5 inches. The ice stripper functions during the ejection cycle to remove ice from the icemaker mold. This white and plastic part facilitates the transfer of ice cubes from the ice maker into the ice bucket.

Causes of a bad ice stripper can include regular wear and tear from frequent use, exposure to hard water deposits, and accidental impacts or mishandling. Over time, the stripper can crack, break, or become inefficient at removing ice cubes.

Symptoms of a bad ice stripper include:

• Ice cubes not being properly dispensed into the ice bin
• Ice cubes getting stuck in the mold
• The ice maker not producing ice as efficiently
• Visible damage or wear on the stripper

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models

The Freezer Door Lower Hinge Bushing is an OEM replacement part for GE refrigerators. It is a component located within the freezer door hinge.

Causes of failure typically involve normal wear over extended use. Refrigerator doors experience frequent adjustment which can deteriorate hinge bushings.

Symptoms of a bad lower hinge bushing include:

• The freezer door being loose or wobbly in its closed position
• Excessive noise, grinding, or vibration coming from the door hinge area
• Difficulty smoothly opening or closing the door

This is a genuine OEM part that works for some models of GE, and Hotpoint models.

This rear gasket fits the refrigerator's crisper cover, sealing the back edge of the glass/frame. It helps maintain proper airflow and humidity in the crisper area while cushioning the glass and reducing rattles and gaps.

• Creates a seal along the rear edge of the crisper cover to limit air leaks
• Helps maintain consistent humidity and airflow in the crisper compartment
• Cushions and supports the glass to minimize vibration and noise
• Replace if torn, flattened, missing, or if you see gaps or glass rattle

• Unplug the refrigerator before servicing
• Remove crisper drawers and carefully lift off the glass cover/frame
• Pull the old gasket from the rear channel and clean the mating surfaces
• Press the new gasket fully into the rear channel; reinstall cover and drawers, checking for an even seal