Tbx25pa Parts

Remove and replace motor and fan. As expected problem solved. Read more

I ordered 2 new gaskets, one for the freezer and another for the refrigerator. These arrived within a few days. I soaked both in the bathtub filled with hot water for about 20 minutes. My grandson installed both gaskets without any trouble. I duck taped on the freezer door to allow it to 'seep' with the cold air inside the freezer unit as I was told this would help make a better seal. I waited 48 hours before removing the tape and opening the door. So far, I'm very happy with my 'new'... Read more

The front wheel assembly replacement (WRXO2X12454) was straightforward and easy to do. Took maybe 30 minutes start to finish. The rear wheel assembly (wheel WRO2X10695 and axle WRO1X10604) that was more involved as the original wheel axle is actually a rivet that you have to cut out. 1. I used a vibrating multitool with a carbide blade to cut the axle out. Had to use a pair of vise grips to hold the rivet to keep it from spinning while cutting it. 2. The new axle I drilled a 2mm hole thru the... Read more

So slick! Removed the nasty bungee cord he had used for a temporary (Ha ha!) fix months before. Checked the model number inside the frig. Googled "Kenmore parts." Scroll-enlarged the nifty diagram. Said, "A hah." Ordered the parts online. Answered the door the next day. Stopped dancing my little jig. Used the heel of my hand to knock the end caps onto the metal shelf, clicked it back in place on the door, and filled that shelf with beer. Ta dah! Thank you for clear instructions and easy... Read more

Fridge was making clicking noise and not cooling. Ice dispenser wasn’t working either. Research lead me to believe main board was out. YouTube video said to also replace compressor start relay and overload as well. Replaced all 3 parts in 15 minutes and back up and running. Read more

It was a challenge...the shelf unit consists of two plastic end brackets and a long metal shelf. I possessed one original end cap while the metal shelf was inadvertently discarded years ago along with the other broken end bracket. For a few years some white duct tape was pressed into service as a "temporary" bottom shelf. Anyway, I searched for the necessary parts online and found and ordered a new end cap on AppliancePartsPros.com and a new metal shelf from another online vendor. The new end... Read more

Replaced with new handles. Read more

Was replaced. Read more

Ok so my mom called GE and a service man came out. He said no good. The refrigerator was to old to be fixed. You will have to buy a new one .. ok so with that said he collected his $100 dollars service fee !!! I slid the refer out and started tinkering with it. I went on line and hit your web page saw schematic map and ordered fan motor because the one on refer wouldn’t turn !!!! You guys delivered it on a Sunday ( perfect) I put it in carefully and bam it worked. I was in shock that it was... Read more

Did some research on Appliance Parts Pros site. Took a chance and ordered the parts I thought were needed. They came in three days. Suspicions confirmed. Relatively easy fix. All went well. Repair videos were especially helpful. Appreciate ease of repair and help from App Parts. Thanks Read more

Found that piece of auger was broken up front. Ordered auger and several other parts associated with ice maker just to be sure. Also replaced condenser motor which was making noise. Read more

This is in a 15 year old Built-in Monogram that had the compressor replaced a few years ago. Before discovering the motor failure I replaced the main board since a Refrigeration Contractor I know said that if it wasn't bad it would be soon since those parts typically only last around eight years. The motor replacement is pretty simple; more time is spent getting to the motor and re-assembling everything than actually changing the motor. The trickiest part is getting the fan set correctly on... Read more

Ordered the part from you using your clear part diagram, arrived two days later and crisper was fixed! Read more

I removed the drawers and old rails, and screwed in the new ones. It was very straightforward. Read more