Tz2oql P1156201wl Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Appliance Light Bulb

4.9 (372)

By: Whirlpool

Part Number: 8009

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

Dimming or flickering light
Complete lack of illumination inside the appliance
Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Do-It-Yourself Stories from Customers like You Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

$17.76

Compare At:: $20.96
You Save:: $3.20

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Run Capacitor

4.9 (188)

By: Whirlpool

Part Number: WPW10662129

The Run Capacitor is an OEM part for Whirlpool appliances, designed to provide the necessary electrical charge to start and run the compressor motor. This part attaches to the compressor to aids in maintaining a consistent motor speed and ensuring smooth operation. The run capacitor plays a crucial role in the appliance's electrical system, storing and releasing energy as needed to power the motor.

Causes of a bad Run Capacitor include electrical surges, wear and tear over time, or overheating, which can lead to a failure in providing the necessary start-up energy or maintaining motor speed.

Symptoms of a bad Run Capacitor include:

The appliance does not start.
The motor shuts off shortly after starting.
The appliance is humming but not running.
Increased energy consumption.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Too warm
Clicking sound
Won't start
Freezer section too warm

Do-It-Yourself Stories from Customers like You Both the freezer and refrigerator stopped cooling Raymond O. • Kerrville , TX • April 11, 2015

I have a Kitchen Aid side by side refrigerator/freezer which is 8 years old. One day it just stopped cooling. At first I was just going to junk it and purchase a new one. However, I took off the lower back cover and noticed the compressor was not running. I knew from experience that these compressors need a starter capacitor and relay and it is not uncommon for these parts to fail. I looked on the Internet for a video which showed how to remove the parts. I also found a video which showed how... Read more

$42.95

Compare At:: $50.68
You Save:: $7.73

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Condenser Fan Motor Kit

4.9 (154)

By: Whirlpool

Part Number: 833697

This OEM Replacement Part is a high-quality, 2-watt condenser fan motor for Whirlpool refrigerators.The motor is designed to optimize your refrigerator's cooling performance. This 115-volt motor operates with a clockwise rotation.

Symptoms of a bad condenser fan motor kit include:

Gradual rise in interior freezer temperatures
Inability to maintain consistent cooling performance
Loud buzzing or grinding noises coming from inside
Tripped breakers or failure to restart after service

Causes stem from normal wear of ball bearings as the high-efficiency motor operates continuously. Exposure to dust or debris introduced through openings accelerates wear over many years of use.

This OEM part is also compatible with brands including Kenmore, KitchenAid, and Danby.

This part fixes the following symptoms

Fridge runs too long
Noisy
Freezer section too warm
Fridge too warm

Do-It-Yourself Stories from Customers like You Conderser motor went out David W. • Durand , MI • April 03, 2014

After reviewing the 'how to' video on AppliancePartsPros.com, I unplugged the refrigerator and removed the back cover to access the motor. I then unplugged the wiring and removed the bad motor. I cut the clip plug and wired it to the new motor, installed the fan blade from the old motor and re-installed the new motor. After connecting the clip plug and re-installing the back cover, I plugged the refrigerator in and checked the interior about 5 minutes after the repair. Everything has been... Read more

$61.95

Compare At:: $73.72
You Save:: $11.77

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Door Switch

4.9 (80)

By: Whirlpool

Part Number: W11384469

The Door Switch is an OEM part for Whirlpool refrigerators. This switch plays a crucial role in monitoring the status of the refrigerator door. It detects when the door is open and closed and signals the refrigerator to suspend or resume cooling operations accordingly.

Causes of a bad door switch can include general wear and tear over time, exposure to moisture, or impact damage. Please check for proper connection and that the wires are intact before replacing the switch.

Symptoms of a bad door switch include:

The refrigerator fails to resume cooling after closing the door
The inside light fails to turn on when the door is opened
Abnormal energy usage due to improper door monitoring

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Fridge interior light kept going out Phil D. • Phoenix , AZ • June 16, 2014

Replaced door switch - it took less than 5 minutes - works perfectly Read more

$29.30

Compare At:: $35.16
You Save:: $5.86

IN STOCK

Ships Today Guaranteed

Add to Cart

Do you need help?

Get Questions Answered Instantly.

1-877-477-7278 Online

Live Help

Best Seller

Genuine Whirlpool part

Defrost Thermostat

4.8 (29)

By: Whirlpool

Part Number: WP10442411

The Defrost Thermostat is an OEM part for Whirlpool refrigerators. It monitors the temperature of the evaporator coils and triggers the defrost cycle when the coils get too cold, preventing frost buildup and ensuring efficient cooling. It operates by closing the heater circuit to initiate the defrost cycle. It opens the circuit when the temperature rises above 55 degrees Fahrenheit. It then resumes operation when the temperature drops to 20 degrees Fahrenheit.

Causes of a bad defrost thermostat can include regular wear and tear, exposure to moisture, or electrical issues. Over time, the thermostat may lose accuracy or stop working altogether, leading to frost accumulation or inefficient cooling.

Symptoms of a bad defrost thermostat include:

Excessive frost buildup in the freezer
The refrigerator running continuously or not cooling properly
The defrost heater not activating
The refrigerator cycling on and off frequently

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Freezer not defrosting
Frost buildup
Fridge too warm
Fridge runs too long

Do-It-Yourself Stories from Customers like You Amana br18vw refrigerator wasn't staying cold Adrian B. • Chicago , IL • February 08, 2015

I am not new to APP, fixed a tub belt on a Maytag dryer in the past. My frig started getting warm so I went onto to one of those "lists" sites and found a appliance repair place. The guys were great and came out right away. The tech said it was the cold control and $260 later my part was replaced, about 30 minutes. Great I thought until my frig started getting warm again. Those cold sensors on the beer bottles are a great indicator. Not wanting to spend another $260 I looked up on APP to see if... Read more

$29.95

Compare At:: $43.93
You Save:: $13.98

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Refrigerator Door Gasket

4.1 (7)

By: Whirlpool

Part Number: WP12550111Q

The Refrigerator Door Gasket is an OEM part for Whirlpool refrigerators. This gasket forms a seal around the refrigerator door, keeping cold air inside and warm air out. Measures approx 31 1/2 inches x 41 1/2 inches. Note: For black order WP12550119Q.

Causes of a bad door gasket can include constant opening and closing of the refrigerator door, exposure to temperature fluctuations that can cause the gasket to warp or crack, and deterioration over time due to wear and tear or improper cleaning methods.

Symptoms of a bad refrigerator door gasket include:

The door not sealing properly
Visible cracks, tears, or warping in the gasket
Increased energy bills due to poor insulation
Frost or condensation forming around the door edges

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms

Door sweating
Fridge runs too long
Fridge too warm

Do-It-Yourself Stories from Customers like You Refrigerator door wasn't sealing properly Vandana M. • Gurnee , IL • March 24, 2014

Replaced the door gasket. tip: No need to remove all the screws completely - loosen until you can peel off the old gasket. Read more

$104.95

Compare At:: $123.84
You Save:: $18.89

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.6 (7)

By: Whirlpool

Part Number: WP90767

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

Loose or wobbly components within the appliance
Panels or parts that are not securely attached
Rattling or unusual noises due to loose parts
Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Certain buttons were'not working Brent T. • Easton , MD • November 17, 2014

One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more

$7.95

Compare At:: $9.46
You Save:: $1.51

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Water Valve Single

4.8 (23)

By: Whirlpool

Part Number: 4318047

The Single Water Valve is an OEM part for Whirlpool refrigerators. This valve controls the flow of water to the refrigerator’s ice maker and water dispenser, ensuring a consistent and reliable supply of water for ice production and dispensing.

Causes of a bad single water valve can include wear and tear over time, mineral buildup from hard water, or electrical malfunctions.

Symptoms of a bad single water valve include:

No water dispensing from the refrigerator
The ice maker not producing ice
Leaks around the valve area
Unusual noises when the water dispenser is activated

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms

Ice maker not making ice
Leaking

Do-It-Yourself Stories from Customers like You Leaking valve on ice maker Richard D. • Front Royal , VA • March 15, 2014

Order new valve Read more

$44.95

Compare At:: $53.04
You Save:: $8.09

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.9 (13)

By: Whirlpool

Part Number: WPW10348409

This factory screw secures appliance components. It restores a tight, reliable hold when the original hardware is stripped, missing, or corroded—helping prevent vibration and keeping panels and brackets properly aligned.

Provides threaded fastening for panels, brackets, covers, or internal components
Replaces worn, rusted, stripped, or missing hardware
Helps reduce vibration and rattling from loose parts
Restores proper alignment and a secure fit of attached parts

What's included: Includes 1 screw. Installation notes:

Disconnect power; turn off water supply before service
Note original screw location and retain any spacers or clips for reassembly
Start threads by hand to avoid cross-threading
Tighten snugly; do not overtighten to prevent stripping

Do-It-Yourself Stories from Customers like You Dishwasher would not start Mark M. • Midlothian , VA • July 16, 2016

Maytag Dishwasher (about 5 years old). Some of the buttons had stopped functioning. Then the Start button began choosing whether or not to work. Eventually it would not start at all. Upon removing the control panel, the first thing I noticed was that the brackets that hold the two lower screws were broken. (So this was the reason that the door was so hard to open from the time it was new.) I trouble shot the thermal fuse, the door-latch switches, and inspected the control board trying to find... Read more

$7.95

Compare At:: $9.54
You Save:: $1.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw, 1 Piece

4.9 (18)

By: Whirlpool

Part Number: W11233072

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

Fastens panels, brackets, covers, or internal parts to the chassis or frame
Helps maintain alignment and support, reducing rattle, vibration, or looseness
Replaces missing or damaged screws that have backed out, broken, or stripped
Restores secure mounting after service when original hardware is lost

What's included: 1 screw Install notes:

Disconnect power; shut off water or gas supplies before servicing
Use the correct driver; start threads by hand to avoid cross-threading
Match length and thread to the original location; do not substitute with longer hardware
Tighten snugly; do not overtighten into plastic or thin metal

Do-It-Yourself Stories from Customers like You Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

$20.95

Compare At:: $24.93
You Save:: $3.98

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Crisper Cover Support Post

5.0 (9)

By: Whirlpool

Part Number: 10461901

Color: white. Measures about 1-1/2 inches wide by 7-1/2 inches high by 2 inches deep.

Do-It-Yourself Stories from Customers like You It was missing the support leg between the garden fresh drawers Terri L. • Stevensville , MT • December 26, 2016

Purchased a replacement piece. Read more

$29.68

Compare At:: $35.62
You Save:: $5.94

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Speed Clip (Screw Retainer), 1 Clip

4.8 (4)

By: Whirlpool

Part Number: WPM0114003

This speed clip is a small retainer that slides over a panel edge to provide a captive thread for a screw. Replacing a worn or missing clip restores a tight, rattle-free hold on the attached component. What it does:

Slides over a panel or bracket to create a captive thread for a mounting screw
Maintains tension to resist vibration and loosening
Helps when a screw spins or won't tighten due to a missing retainer
Addresses loose, rattling, or misaligned panels or trim

What's included:

1 speed clip

Install notes:

Disconnect power and, if applicable, shut off water before servicing
Note the original clip's location and orientation for correct fit
Fully seat the clip on the edge; start the screw by hand to avoid cross-threading
Do not overtighten; ensure the component is secure and noise-free

Do-It-Yourself Stories from Customers like You Water was leaking & then freezing in the bottom of the freezer compartment Ronald S. • Frankfort , IL • December 30, 2014

Replaced the water tube that went from the plastic tubing to the ice cube tray. Found that even though it was the same exact length as the original, there was only an extremely small gap from the end of the tube to a splash board. This may have been the root cause of my problems. Read more

$11.95

IN STOCK

Ships Today Guaranteed

Add to Cart

Shop With Confidence

Over 15 million customers served!

365-Day Returns

Hassle-free Returns

Fast Delivery

1.7 Days on Average!

Free Tech Support

On all purchased parts!

Genuine Whirlpool part

Fan Grommet

5.0 (1)

By: Whirlpool

Part Number: WP2264462

This rubber grommet cushions and secures a refrigerator fan motor, isolating vibration to help reduce noise and keep the fan properly aligned in its mount.

Provides a snug, vibration-dampening seat for the fan motor shaft or mounting stud
Helps prevent rattling, buzzing, or humming sounds from a loose fan mount
Maintains proper fan alignment to avoid blade contact with shrouds or brackets
Replaces aged, cracked, or compressed rubber that can lead to increased vibration

What's included: 1 fan grommet Install notes:

Disconnect power before service; wear cut-resistant gloves
Access the fan assembly (rear or evaporator section), support the motor, and remove the old grommet
Press the new grommet fully into the bracket or housing; transfer any spacers as originally configured
Reinstall the motor and verify the fan blade spins freely with no contact before restoring power

Do-It-Yourself Stories from Customers like You Loud fan noise from the freezer Valerie G. • Sicklerville , NJ • October 27, 2014

Ordered the parts from you guys, evaporator fan motor, fan blade, and new grommets. unscrewed the inside back panel of the freezer, removed the old fan, installed the new one. Read more

$31.51

Compare At:: $37.18
You Save:: $5.67

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw (#8-18 X 5/8 In.)

4.5 (2)

By: Whirlpool

Part Number: WP98165

This replacement screw secures panels, brackets, and components inside appliances. Replacing a missing or stripped fastener restores a snug, rattle-free fit using the correct #8-18 thread and 5/8-inch length.

Fastens covers, trims, brackets, and internal parts to the cabinet/frame
Used wherever a #8-18 x 5/8 screw is specified
Replace if the original is missing, corroded, stripped, or will not tighten
Symptoms: loose or rattling panels, gaps, or hardware that backs out

What's included: 1 screw (#8-18 x 5/8 in.) Installation notes:

Disconnect power; shut off gas/water before servicing
Match thread and length; start by hand to avoid cross-threading
Use the correct driver bit and tighten snugly—do not overtighten
Inspect and replace damaged clips or tabs before securing

Do-It-Yourself Stories from Customers like You Missing parts Barry E. • Long Beach , WA • July 20, 2019

Replace Read more

$7.95

Compare At:: $9.46
You Save:: $1.51

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Cabinet Roller

4.5 (2)

By: Whirlpool

Part Number: WP10450603

The Cabinet Roller is an OEM part for Whirlpool refrigerators. It facilitates the smooth movement and positioning of the refrigerator cabinet, making it easier to adjust or relocate the appliance as needed. This roller is designed to support the weight of the refrigerator while allowing for effortless mobility.

Causes of a bad Cabinet Roller can include wear and tear over time, exposure to heavy loads, or damage due to rough handling or impact. These factors can lead to the roller becoming ineffective or breaking altogether, resulting in difficulty moving the refrigerator.

Symptoms of a bad Cabinet Roller include:

Difficulty moving or adjusting the refrigerator
Unusual noises when attempting to move the appliance
The refrigerator not sitting level or wobbling

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You The front bottom plastic roller of the refrigerator cracked and broke/crumbled under the weight of the fridge while rolling it out to clean behind it Pedro N. • Eustis , FL • June 02, 2014

I contacted Appliance Parts Pros' wonderful (comprehensive and accurate) website, to search for the part. I located the part, so I ordered it and received it within 4 days, which is also an advantage of using Appliance Parts Pros. Upon arrival of the part, I had to grind off one end of the river that acts as a hub for the wheel to turn on. Then I slipped the the plastic wheel, that I received from Appliance Parts Pros, onto the rivet and welded it to the metal cage it fits onto. Finally I... Read more

$11.95

Compare At:: $14.34
You Save:: $2.39

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Bottom Hinge Pin (Refrigerator Door)

5.0 (1)

By: Whirlpool

Part Number: 67007018

This Bottom Hinge Pin supports the refrigerator door at the lower hinge, providing a smooth, stable pivot. Replace a worn or bent pin to restore proper door alignment, closing action, and gasket sealing.

Serves as the pivot point for the door on the bottom hinge bracket
Helps maintain alignment so the door gasket seals correctly
Wear/failure symptoms can include door sagging, wobble at the hinge, squeaks or grinding, and poor self-closing
Replacing a damaged pin can reduce hinge play and improve door operation

What's included: 1 bottom hinge pin Installation notes:

Disconnect power; turn off water supply if working near a dispenser line
Remove items from the door and support the door to prevent strain on hinges
Detach bottom hinge fasteners, lift door off, replace the pin, and reassemble
Adjust hinges as needed

Do-It-Yourself Stories from Customers like You In moving refrigerator from one house to the next a hinge part was lost Ricardo L. • St. Louis , MO • September 17, 2018

Ordered new hinge piece and installed Read more

$5.95

Compare At:: $7.02
You Save:: $1.07

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Tz2oql P1156201wl Parts

Appliance Light Bulb

Run Capacitor

Condenser Fan Motor Kit

Door Switch

Defrost Thermostat

Refrigerator Door Gasket

Screw

Water Valve Single

Screw

Screw, 1 Piece

Crisper Cover Support Post

Speed Clip (Screw Retainer), 1 Clip

Fan Grommet

Screw (#8-18 X 5/8 In.)

Cabinet Roller

Bottom Hinge Pin (Refrigerator Door)