Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Dryer won't heat or takes forever to dry clothes? A failed heating element is the most common cause. This repair restores full heat in about 15 minutes.
Watched your video and followed the instructions. It was a quick and easy fix. Thanks Appliance Pros and the delivery took less than 48 hours, that was standard shipping. I will order from them again when I need parts ! Thanks Read more
This 8-18 x 5/8-inch screw secures dryer panels, brackets, and covers. Replace missing or stripped fasteners to restore a tight fit and stability.
I put all pieces that I ordered on the dryer and plugged it in. Read more
Mounts the washer top panel to the cabinet frame. Replace if screw is stripped, rusted, missing, or damaged during cabinet disassembly and repair work.
I looked inside and saw the teeth were worn off the "dogs" so I purchased the Cam Agitator repair kit and a new bolt. Getting the old bolt out was the hardest part since it was worn and rusted. I ended up having to buy a set of socket extensions and a set of stripped bolt sockets so $45 in tools and it took me an hour to get the old bolt out but putting everything back together was a breeze. I was very proud of myself, as a woman, that I fixed this problem myself and didnt have to pay a repair... Read more
Secures baffles to the dryer drum interior. Replace worn, stripped, or missing screws to keep baffles firmly attached and prevent rattling during operation.
I ordered two replacement baffles and screws, then lifted the top of the dryer to access the drum and installed the two new baffles. Read more
Replacement screw for washers. Used to secure various components including handles, panels, and internal parts. Order if original is missing or stripped.
After shopping for a new Whirlpool Thin Twin Stack, Found appliance parts pros online and decided to take it apart to see if repair was a possibility. APPro's online instructions were easy to follow, in a couple hours it was apart, and I placed the order. Reg ground took a week from NY, so the laundry piled up that week. The parts arrived on Monday morrning, by afternoon the machine was running like new! The cause was the belt tensioner pulley had frozen. Replaced it, drum wheels,snap... Read more
Covers and protects your dryer's light bulb from heat and debris while diffusing illumination. Replace if cracked, yellowed, or missing. Confirm fit.
Been doing these repairs for a lil while now. Your Company provides Videos on Appliance Brands that detail how to get to the part that is suspected and how to Test and Repair. I suspected a Part by it's sound and followed the Video to get to the part and made the repair. Read more
Dryer not heating? A blown thermal cut-off is a common cause. This safety fuse opens if overheating occurs. Test with a multimeter for continuity.
The first part we ordered was the heating element. The dryer still wasn't heating so we ordered the thermostat. We received the thermostat, and got it put in the dryer still wasn't heating so I consulted my dryer manual and found out that even though there was electric to the dryer it still might not heat if the breaker was not all the way on, so I reset the breaker and voilà had heat. Working very well now. Read more
If your dryer motor has come loose or makes grinding noises, this motor clamp secures the drive motor. Simple DIY repair with basic tools in under an hour.
Replaced the motor, blower, rear drum felt seal, and drive belt. Vacuumed up the lint everywhere, cleaned extra lint out of the chute, around the blower, and rear vents. Read more
Dryer not heating or taking too long to dry? This high-limit thermostat monitors temperature and cuts power when it gets too hot. DIY-friendly repair.
Our dryer seemed to be taking a long time to dry, often needing a couple cycles to complete the job. Then one day it stopped heating at all. After watching a couple videos and testing with a multimeter I figured out not only the thermristor had blown (can happen due to bad airflow) but also half the heating element was shot. I ordered both parts for overnight delivery and received them at noon the next day. Replacement was easy and the dryer is good again. Side note: After the repair was... Read more
Fixes dryer drum not turning or motor humming without spinning. This drive motor powers the drum rotation. Moderate DIY repair, 1-2 hours typical.
If I opened door and held door switch, started dryer, turned drum by hand, quickly closed door and pushed start again before drum stopped turning, dryer worked fine. Apparently the part of the motor that gives it more juice on start up went bad. Ordered motor on Monday, received on Wednesday. Blower wheel would not come off the shaft of old motor, chiseled off as shown in motor installation video. Apparently wheel becoming fused to motor shaft is a common problem based on all the comments.... Read more
Dryer door won't stay closed? This door strike engages with the catch to secure the door. Simple DIY fix in minutes with basic tools and video guide.
Removed and replaced with new strike and catch. Per instruction video. Read more
Black touch-up paint for appliance exteriors. Covers chips, scratches, and worn spots on refrigerators, ranges, and more. 0.6 oz bottle with brush.
Replaced It With New One Read more
Dryer won't start but lights work? A faulty door switch prevents operation. This replacement switch restores normal function in under 10 minutes.
Ordered replacement, easy swap out. Less than 10 minutes. Read more
Secures cooktop panels, burner components, and trim pieces. Replace missing, stripped, or damaged screws to eliminate rattles and keep parts aligned.
After being told by a service repairman that it would cost me close to $200 to repair, I resolved to just not use the dispenser. After about a year, I had decided that I wanted to repair it and would look at the options myself. At the least, I could figure out which parts were needed to repair it and have them on hand for a service guy if I determined I could not do the job myself. The more I studied it, the more I felt confident that I could do it, and sure enough, when the part arrived - a... Read more
Supports and pivots the hinged dryer top panel for service access. Replace if cracked, broken, or causing wobble, scraping, or alignment gaps.
Installed a new Ignitor & Thermal Fuse. Read more
Replacement screw secures panels, brackets, and internal assemblies. Needed when original hardware is stripped, corroded, or missing to keep parts tight.