Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement drum baffle for washers. Clips onto the inner tub to direct water flow. Needed when original is cracked, broken, or clips have sheared off.
Rather than call a repairman, I looked on line to get a replacement part. AppliancePartsPros.com had clear diagrams of the washer's major subassemblies from which it was easy to identify the broken baffle. AppliancePartsPros.com offered the part at the lowest price I could find online. That price seemed very high for a simple piece of plastic, but I know no alternative way to fix the problem. i ordered the part. It came in a couple of days when I was not home. My wife told me by phone that the... Read more
Replacement drain hose for washing machines. Connects the drum to the drain outlet. Replace if cracked, split, leaking, or worn from rubbing against shocks.
Prior to ordering parts I had pulled the pump strainer basket and cleaned it out. There was both soft and hard scale build up. The tub-to-pump hose was also pretty crusty/slimey. Still got warnings for SUDS and repeated F02 errors. Ordered parts and replaced the pump, tub-to-pump hose, interior drain hose and exterior drain hose (both hoses has some slime build up). The water standing in the tub when I emptied it the first time had very little suds but we kept getting the SUDS warning. ... Read more
Fix F24 or F-20 error codes with a new water temperature sensor. Located on the outer tub, this is a moderate DIY repair. Video guide available.
Replace the water temperature sensor and still had the error code. While I had the back of the machine open I ran the washer. I traced the black wires from the temperature sensor and wiggled them as the washer was running. At one zip tie every time i moved the wires the washer would stop running and the error code would flash. Sure enough, like many others posted, the vibration from the machine had split the wire. I spiced the wire back together and have not had a problem since. Read more
Fix F20 error codes and water level issues with this pressure switch hose. Connects sensor to tub for accurate water level detection. Easy 30-min repair.
Several months back, I checked the supply hoses and replaced the hot water hose because of corrosion. The cold water hose was fine. I replaced the water inlet valve and that seemed to fix the problem, but after about a week, the problem resurfaced. After searching various internet resources, I though the pressure switch which detects the water level could be bad. I order both the pressure switch and the hose that connects it to the air chamber. Before installing the new pressure switch, I... Read more
Secures the handle end cap to the center of your refrigerator door. Replace if missing, stripped, or lost during handle repairs. 8-18 x 1/2 inch size.
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more
Secures washing machine hoses to prevent leaks in the water system. Replace if damaged, corroded, or connections are loose. Verify fit by part number.
We ordered parts from appliance parts pros and I fixed it. Read more
Replace your washer's drive pulley if worn, wobbling, or has damaged mounting flats. Installs on the tub shaft to transfer belt motion to the drum.
I pulled the unit away from the wall and noticed black dust on the floor. Unplugged the unit, turned off the water. Removed back panel (about 10 screws with Torx heads) and noticed the belt was off, the drive pulley was loose and wobbling on the shaft, black dust all over the inside. Belt was worn along one side. Some grooves/damage in the outer drum casing around the pulley where it appeared the belt had rubbed. Removed the lower crossbar (2 more screws) to get better access to the drive... Read more
Replace this washer dispenser seal when you notice leaks around the detergent dispenser area. Creates a watertight connection to prevent moisture damage.
I ordered the dispenser and the distribution nozzle since the old one was in bad shape. I also replaced the boot since I had to take the entire machine apart and it is 20 years old. I watched your videos on you tune to learn what to do. I recently lost my job and really could not afford to hire someone to fix my washer. I have to say it wasn't that hard to do and my wife was so happy that I was able to fix it myself! I probably saved $200 or $300 in service calls and labor on top of what they... Read more
Fix F11 or F70 error codes with a new motor control board. Common when washer won't spin or start. DIY-friendly repair takes about 30 minutes.
After much reading on line regarding my problem. I decided to do any test that I could to try to diagnose and fix this myself if I could. This took a lot of time and patience to get the answers on how to go about this from "experts" as some of the info was contradictory. I was almost about to give up and buy a new washer with less electronic parts and buttons as advised by an honest appliance technician . I tried one more thing first which was to disconnect the lead wires connected to the MCU .... Read more
Rubber vent hose that connects the wash tub to the dispenser, allowing air circulation. Replace if cracked, leaking, or detached from the tub assembly.
Removed the leaking hoses and seal. Installed the new ones. They all fit perfectly. The disassembly/reassembly of the washer took the most time. Read more
Rubber inlet hose that connects your washer to the water supply. Replace if cracked, leaking, or worn. Standard 5-foot length with included washers.
Replaced flow meter and control valve Read more
Routes wastewater from your washer to the household drain. Replace this hose if cracked, kinked, clogged, or leaking at connections to restore proper drainage.
Connects detergent dispenser to wash tub for proper filling. Replace if cracked, leaking, or causing water pooling. Verify fit with your model number.
Water seemingly leaked from the top left area of the machine... trickling down and gathering in the middle of the front counterweight... then to the bottom chassis eventually to the floor. I thought out of an abundance of caution to replace not only the tub seal (most likely culprit) but also the hose and seal from the detergent compartment while everything was open and exposed. Followed the replacement steps (used a few different videos to get other opinions and tips before I started). Went... Read more
Fix F35 or SUD error codes with this water level pressure switch. Restores proper fill control and cycle progression. Moderate DIY repair, 30-45 minutes.
YouTube, water level sensor, cleaned drain basket Read more
Stabilizes the drum during washer transport or moving. Includes four bolts that thread into rear bolt holes. Replace if original bolts are missing or lost.
The shipping bolts came in 2 days!!! Wow ! So we watched a video on how to install them and moved the washer without messing it up.. Thank you so much for fast and friendly service :-) Read more
Secure dryer vent hose to exhaust outlet and wall connection. Replace worn clamps to prevent duct slippage and maintain proper airflow. Confirm fit.