We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This locking nut is used for many purposes on a range of machines including household appliances. This nut is often used for leg leveling for machines. It will help with vibrations from washers and dryers. If the nut is used for this purpose and goes missing or becomes damaged, it could cause the machine to vibrate more and seem louder.Nuts are made from metal and are built to last a long time. However, there can still be issues that arise. In some cases, the nuts might go missing if they become loose and the machine is moved. They could also corrode over time and need to be replaced. The replacement of the nut is typically a fast and simple repair.The nut is a genuine OEM replacement part sourced from the manufacturer. It can work with washers, dryers, and combo machines, and is compatible with models from Whirlpool, Kenmore, Maytag, and Roper. The part is sold individually. Owners may want to have several on hand.
Replaced 2 springs and brackets. Also replace rear legs and front legs and re leveled. Works fine. Read more
Most orders arrive by Tuesday, November 24
This replacement screw secures appliance components such as panels, brackets, and trim. Replacing a missing or damaged fastener restores a tight, rattle-free fit and helps keep your appliance assembled correctly after service or routine maintenance.
Took the back cover off, noticed the bolt holding the rotor on was broke off in the shaft which wore the stator and rotor. So I drilled out the broken bolt and extracted it with an easy out and replaced the stator the rotor and the bolt. Works great ! I maybe had 2 hours time in it and that includes taking it out of the laundry room and into the garage to work on it and back. Read more
This is a chrome-finished timer knob that attaches to the timer shaft on the dryer's control panel, allowing you to select and start drying cycles. It is made of plastic with a metallic chrome appearance. Replace this knob if it is cracked, broken, or no longer grips the timer shaft properly, making it difficult to turn or set the dryer cycle.
I ordered the door hinge and bushing. I watched the online video showing the replacement procedure. The parts were correct. It was easy to replace. The door works great now. Very pleased with the process and results. Read more
The Shock Absorber is an OEM part compatible with Whirlpool washing machines. It is a crucial component that helps reduce vibrations and dampens movement during the spin cycle. The shock absorber absorbs mechanical stresses to prevent the washer tub, suspension springs, and other components from wearing out prematurely.
Causes of a bad shock absorber include wear and tear over time, cracks or breaks from heavy loads, or damage due to impact.
Symptoms of a bad shock absorber include:
This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Took apart replaced spring Replaced seal Read more
Mounts inside the washer drum to lift and tumble laundry evenly. Replace if cracked, broken, loose, or missing to restore proper tumbling action.
We ordered the baffles from AppliancePartsPros.com and received them in just a couple of days. We looked up a you tube video on how to replace the baffles and repair was done by my husband in a matter of minutes. We will definitely be using this website again to order parts!! Read more
The Drain Hose is an OEM part for Whirlpool front-loading washers. This hose is responsible for transporting water from the washer tub out to the household plumbing drain.
Causes of a bad drain hose can include cracks developing over time due to the constant cycle of filling and emptying during normal operation. Mineral or lime buildup inside the hose may also cause blockages.
Symptoms of a bad drain hose include:
This OEM part is compatible with some KitchenAid, Jenn-Air, and select Kenmore models.
Extends your washer's drain hose to reach distant standpipes or sinks. Includes coupler and clamps. Replace when you need extra length for installation.
Attached drain hose extension and it more than reached the drain. Read more
Secure brackets and hardware for stacking a dryer on top of a front-load washer. Needed when vertically installing units to save floor space.
No one locally had any stack kits, nor could they tell me if it was even possible to stack appliances of differing models. Your technician took the time to help solve the problem. The stack kit fits perfectly. Read more
This cap is a small protective cover used in select appliances. It helps secure and seal its mating component, preventing leaks, debris intrusion, or loosening during normal operation.
Removed the back cover. (Glad I used my power tool to remove all the screws) I then removed the sheared off part of the bolt using drill and easy-out tool. It was a straightforward install of the new bolt. I added a little bit of blue Loctite even though the bolt already had some dry thread sealer. I torqued it down enough to hold everything snug. I also replaced the cap on the water pump filter as I cracked it when I removed it. Tip: Don't use pliers even with a rag to cushion or be more... Read more
Replacement door hinge for front-load washers. Supports door weight and enables smooth opening/closing. Replace if cracked, broken, or causing door sag.
After years of replacing the female electric latch switch that controlled the operation of the machine, I discovered that the window/door's handle's connection to its male latching hook had failed. The two were no longer interconnected. Also, the window/door's frame and hinge were materially "fatigued" meaning the hinge/body assembly was allowing the window/door to sag - causing the misaligned door/window to machine body electric latch switch to break when the window/door was closed. Gaining... Read more
This hose clamp secures a hose connection to prevent leaks and keep your appliance running smoothly. It provides a tight, reliable hold on the hose fitting so water or air stays contained during operation.
Took off cover, installed new parts. Read more
This is a plastic air dome that traps air and transmits water pressure changes to the pressure switch, which controls the water level inside the washer tub. It connects between the tub and the pressure switch hose. Replace this part if the washer overfills, underfills, or does not fill at all, as a cracked or clogged air dome prevents accurate water level sensing.
Opened the back of machine and saw that a mouse had eaten holes in all but one of the rubber hoses. Took the top off the machine for better access. Appliance Parts Pros were the only company I could find that had all the pieces I needed in stock. Quick and easy to order online and fast shipping. Replaced the damaged hoses. Everything fits great and was easy to install. Definitely a diy project. I have even booked marked Appliance Parts Pros. Thank you Appliance parts Pros. Read more
The Dispenser Metering Pump is an OEM part for Whirlpool washing machines. It dispenses laundry detergent at timed intervals during wash cycles.
Causes of a bad metering pump can include worn gears, seals or valves that result in improper detergent dispensing. Mineral buildup or internal blockages over time can also lead to malfunction.
Symptoms of a bad metering pump include:
This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
The Washer Filter-Fluff is an OEM replacement part for Bosch washing machines. It is a critical component responsible for capturing lint, debris, and other particles that may accumulate during the wash cycle, preventing them from clogging the drainage system or causing damage to the machine.
Over time, the accumulation of lint and debris can impede the filter's effectiveness, leading to drainage issues and reduced washing performance. Physical damage to the filter can also compromise its ability to capture lint properly.
Symptoms of a bad washer filter-fluff include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore washing machine models.
Bosch Axxis wasn't draining. Cleaned out filter and still didn't drain. There was also a whining noise when it was trying to drain. So I did some research and confirmed what I suspected. The drain pump had failed. Ordered a new pump and it arrived in two days. Replacement took a couple hours. Had to remove the back panel and front lower panel. Two hoses connected to the old pump had to be disconnected as did a power connection. Putting the new pump back in was just a matter of reconnecting... Read more
Shipping bolt kit secures the drum during transport or when laying washer on its side for pedestal installation. Replaces lost or discarded bolts.
Installed barrel locks(threw the OEM one's away! Save them!) Retained the barrel during transport. Read more
Prevents water leaks where the drum connects to the machine. Replace if you notice leaking or bearing noise. Confirm fit with your model number.
I ordered the parts. Watched a youtube video. and tore it apart. Knocked out the bearings and seal, cleaned it up and popped the bearings and seal back in. Put it back together, and wallaa...no more jet engine. Read more