Whirlpool Ed22texht03 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 1115375
Secures and organizes wire harnesses inside your refrigerator. Replace this clip if it's cracked, broken, or missing to properly route electrical wiring.
More
$12.91
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 2205764
$26.09
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 489340
$9.05
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 489387
$17.32
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 549193
$16.54
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 627068
$11.74
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10823377
Includes door, support, spring and mechanism delay. No longer uses the ribbon heater due to the improved foam design. If your refrigerator uses this ice door kit and the mounting tabs are broken you can use the broken tab ice door kit 8201756.
This part fixes the following symptoms
-
Door sweating
-
Door won't open or close
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
Repaired a leaky ice shoot door on an old Kenmore side by side fridge. Stephen M. • Nashua , NH • October 16, 2020
The parts provided fit perfectly, but my old Kenmore 106.56864602 fridge didn't follow the disassembly directions on the site.
To remove the front panel, pull the water drain catcher forward to expose two 1/4 inch screws. After removing the screws, you can then lift off the front panel and disconnect the ribbon cable.
There is another plastic housing on the front of the door held on with screws that appears to be glued into place. Thankfully removal isn't required. Do NOT attempt to slide...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8201756
The Broken Tab Ice Door Kit is an OEM part for Whirlpool refrigerators. This kit includes all the necessary components to repair or replace the ice door chute, which is responsible for dispensing ice from the ice maker to the ice bucket or directly to the user. The ice door chute must seal properly to prevent warm air from entering the freezer compartment, which can lead to frost and ice buildup.
Symptoms of a failing or broken ice door chute include:
- Ice accumulating around the ice dispenser chute
- Frost buildup in the freezer compartment
- Warm air leaking into the freezer, causing temperature fluctuations
- The ice door not closing properly or becoming stuck
- Unusual noises from the ice dispenser area
Causes of a broken ice door chute can include regular wear and tear, physical damage from mishandling or excessive force, or deterioration of the sealing components over time.
This OEM part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.
This kit is used if the ice door mounting tabs are broken off of the dispenser wall. If your model number uses this ice door WP2180353 or this ice door kit W10823377 this kit can be used.
Do-It-Yourself Stories from Customers like You
Broken hinge tabs for kitchenaid ice dispenser door John H. • Keller , TX • June 13, 2014
I used the Broken Tab Ice Door Kit and the repair was perfect! The ice dispenser works better now than before the door broke. Buy the repair kit, follow the instructions, and here's a few notes from my experience:
1. I initially only removed the broken/fragmented parts of the ice door tab hinges. The metal adapter fits around the existing hinges.
2. I did a few (3 to 4) test fits of the adapter using the hinge pin and door to check for proper alignment. I ended up shaving off a bit of...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4317852
The Alumilastic Cement is an OEM part for Whirlpool appliances, typically used in refrigerators and freezers. It serves as a thermal mastic compound, designed to provide a secure and heat-conductive bond between various components, such as evaporator coils and the interior walls of the appliance.
Causes of a bad alumilastic cement can include drying out, cracking, or losing its adhesive properties over time. This can occur due to age, exposure to temperature fluctuations, or improper application. When the cement fails, it can lead to poor thermal conductivity and decreased cooling efficiency.
Symptoms of a bad alumilastic cement include:
- Reduced cooling performance
- Unusual noises from the cooling system
- Components becoming loose or detaching
- Increased energy consumption
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice maker wouldnt make ice Ty G. • Lewis Center , OH • December 30, 2014
I used your online troubleshooting tips and watched the videos on your site. I determined my thermostat was defective, ordered the thermostat which arrived in two days and I replaced the thermostat and I now have a full bin of ice !!!
The do it yourself video was extremely helpful and made the repair very easy.
Thanks so much for the great service and quick delivery !!!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 4386774
The Roller Assembly is an OEM part for Whirlpool refrigerators. This assembly includes the rollers that support and allow the refrigerator to be moved easily for cleaning or maintenance. Proper functioning rollers ensure smooth movement and stability of the appliance.
Causes of a bad roller assembly can include wear and tear from regular use, damage from moving the refrigerator improperly, or exposure to moisture leading to rust or corrosion.
Symptoms of a bad roller assembly include:
- Difficulty in moving the refrigerator
- Uneven or unstable placement of the appliance
- Unusual noises when moving the refrigerator
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The rubber on the roller assembly was ripped off Richard S. • Richfield , UT • July 15, 2018
Took the old assembly off and put the new on, just bolts on, very easy.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2180259
The Ice Dispenser Lever is an OEM component specifically designed for Whirlpool side-by-side refrigerators with built-in ice dispensers. Located inside the ice and water compartment, the lever is responsible for releasing cubed or crushed ice when engaged.
Symptoms of a bad ice dispenser lever include:
- Failure to dispense ice when the lever is lifted
- Loose, wobbly, or uneven movement of the lever
- Ice dispenser mechanism not triggering properly
Causes of a bad lever can be worn gears or connector linkages inside the ice dispensing mechanism from repeated use over time.
This OEM Whirlpool part is also compatible with Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and select Kenmore fridge models.
Do-It-Yourself Stories from Customers like You
The ice dispenser lever was cracked and did no longer trigger the dispensing of the ice Andrea M. • Honolulu , HI • March 01, 2015
I replaced the Ice Dispenser Lever. Since the replacement part is only available in white and my fridge is bone, I replaced also the Water Dispenser Lever, so it looks much better.
I followed the instructions in the video, which were very useful and very well done. My problem was that the refrigerator is a KitchenAid built-in, while the instructions were for a Whirlpool, so the removal of the faceplate was quite different from what was shown in the video and more difficult. Also there were some...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2155590
This fan motor retainer secures the refrigerator's fan motor to its mounting bracket or shroud, reducing vibration and keeping the fan aligned so air circulates properly for consistent cooling.
- Secures the fan motor to its bracket or shroud
- Maintains proper fan alignment and clearance for consistent airflow
- Helps reduce vibration, buzzing, or rattling from a loose motor
- A worn or missing retainer may present as scraping fan noises or uneven airflow
What's included: 1 fan motor retainer
- Disconnect power to the refrigerator before servicing; allow moving parts to stop and wear cut-resistant gloves
- Access the fan area per your model
- Transfer the motor into the new retainer and reinstall using existing hardware as required
- Ensure the fan blade spins freely and clears the shroud before restoring power
Do-It-Yourself Stories from Customers like You
Evaporate motor went out on my Whirlpool refrigerator freezing cold at the bottom but warm on top Toan N. • Anaheim , CA • June 24, 2018
When I first found out that the evaporator fan doesn't work, I went to a local home appliances store to buy one , cost me $40 , real easy to replace it and it solves the main problem , but this evaporator motor was making some loud noise every now and then , especially when we open the door too often. Then I ordered another one from Repair Clinic , this one is even worst , making a loud hum noise constantly, I had to return it. My wife really wants to buy another refrigerator but I don't...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2183787W
White
Do-It-Yourself Stories from Customers like You
Discolored Nadia Q. • Springfield , VA • February 24, 2015
Replaced water lever and overflow grille.
I have had this refrigerator for 20 years and have never had anything problems. The water lever and the grille had gotten dingy looking and I couldn't get it clean enough anymore. I bought these two items, watched the how to video and replaced the arm in minutes.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 4388405
Secures refrigerator shelves to the liner wall. Replace this stud if shelves sag, sit unevenly, or won't stay in place due to broken or missing support.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2256010
Do-It-Yourself Stories from Customers like You
Clip and inside bars missing in fridge Lori T. • Mount Juliet , TN • July 10, 2017
Piece of cake. Literally no hardware required.
Just looked at the diagram provided for my fridge.
The parts fit perfectly.
The replacement clip was inexpensive.
The 2 bars I needed I thought were very expensive. But I needed them so I could store my condiments- to free up space on my shelves.
But - I did it all by myself.
No man- no tools. :)
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 1119787
White plastic hinge cover that snaps onto the top of your refrigerator door hinge. Replace if cracked, broken, or missing for a clean finished look.
Do-It-Yourself Stories from Customers like You
The seal on the door of the refigerator was damaged also the hinge cap needed replacing as it was cracked Michael S. • Fredericksburg , VA • January 20, 2016
I took the new seal out of it's packaging and used a blowdryer on low heat to soften up the seal so that the crease from shipping (it was folded to ship) disappeared. Next I took the refrigerator door off, removed the old seal, & cleaned the area where the new seal would be applied. Following the video on the Appliance Pro Parts website, I re-installed the new seal and put the door back on. Last step was to snap on the new hinge cap I ordered. The video online was easy to follow and this...
Read more
More