Range/Range/Oven Surface Element Board Parts

Stove is a GE Adora Model JBP63HH2bb. It took me forever to figure out how the burner was attached to the rails. My glass top was different than any instructions found on the internet for changing out a burner. The burners on this one are held to the bottom of the glass cook top by two rails that cross the bottom of the burner assemblies. In order to get too the burners you must remove 4 Phillips screws to lower the rails and burners from the cooktop. I suggest two people do this because... Read more

• Oven is too hot
• Oven not heating evenly
• Won't start
• Little to no heat when baking

With the help of Wendee and Karen, we finally figured out my model numbers and which parts where correct. I ordered the parts and all arrived the next day except for the Broiler element which arrived in 2 days. I installed the new Baking Element myself. Took longer to figure out which curcuit braker to turn off. In about 30 minutes I had a brand new Baking Element in my oven working perfectly. On the following day, I installed the Broiler Element. That took a bit longer as it sits in a metal... Read more

I lifted the front hood and removed the back control panel cover. I then replaced two terminal blocks with the new kits. Perfect match except wires were a bit long. So I rolled them up neatly and tucked them away at the control center. Used electrical tape to band both sets of wire and protect them from the metal edges between the range and control area. I replaced the control cover and installed two new burners. Perfect installation. Read more

Having never fixed a fridge before, I did a little research. The unit was not old & the cooling system was operating. Observing the frozen ice inside, I diagnosed it as the heat rod and/or it's thermostat as bad. I contacted ApplianceParts Pros, who assisted in confirming my theory. IMPORTANT NOTE: the sales advisor Joyce was truly an intelligent, knowledgable professional, NOT some "burger-order taker" usually encountered. This alone speaks VOLUMES. Subsequently, the parts arrived... Read more

Replaced timer. Read more

• Timer will not advance

I'm not at all an expert in repairs...I learn how to fix things as they break by researching online so that I don't have to pay a repairman and by doing so have learned a lot of things as a homeowner, but this was my first dryer repair. My dryer had been working perfectly and then suddenly wouldn't start. The inside light still functioned, so it was still getting power. There was a quiet ticking noise coming from the back when plugged in which I determined to be from the timer trying to... Read more

Replaced, took 5 minutes to complete the exchange. Read more

Got the six year old refrigerator from my daughter because of it freezing up but was in good ( Stainless Steel) shape to replace our 21 year old Kitchen Aid. The thermistor had been replaced as a cheap first step but didn't correct the problem as it totally froze over within five days. I decided to tear down again and check the defrost heater element which was found to have an open circuit and hence the replacement part. Thanks to AAP, I ordered the part at the weekend, was shipped on Monday... Read more

I ordered the oven control board, I was told that it would fix my problem. I installed it, which was extremely easy, and it worked. The oven worked flawlessly. Read more

I replace the old timer with the new one I purchased from appliance parts pros.com I removed the nuts from back of top console of the dryer. Removed the electrical prongs from the old timer and then replace with new timer than plug dryer in wall and started the dryer on timed cycle and the heating elements kicked in and my wife was smiling from ear to ear. Read more

Found a video on UTube on how to dissamble the dryer. It was striaght forward and helpful. In the process I found an unusal amount of lint in the pipe from the dryer to the vent pipe to the outside It was nearly blocked about 10" up the pipe.. Read more

I called a repairman and he wanted $230 to put in a new timer so I went online to Appliance Parts Pros.com and found the part and watched video on how to replace timer. The timer cost $89 and I received it in 2 days. It took about 3 minutes to replace and my dryer works great! Read more

• Frost buildup

Replaced sensors and heater element. We'll see if that fixes the problem. It usually happens every 3 months. Read more

• Little to no heat when baking

Turned off the power to the oven, removed the old element and installed a new element that I purchased from Appliance Pros.com. The part was delivered in a timely manner and was packed securely for shipping. Thanks!!!!!! Read more

• Won't start

I am a 76 year old woman and hesitated to tackle the job. But my son sent me a Utube video "how to replace the board," and I was able to replace it, surprisingly, quite easily. I could have done it in a shorter period of time, if I had not been challenged with these arthritic hands and fingers. The refrigerator is now holding the temperatures quite nicely. Joan Read more

• Won't start
• Too warm

I unplugged the freezer, removed the old control board by prying it out with my hands and then pressed in the new control board with my hands. The freezer functioned normally after it was plugged into the wall outlet again. Someone with large hands or short fingernails might benefit from the use of a straight blade screwdriver while prying out the broken control board. Read more