Broiler Element Clips Parts

Replaced heating element and thawed out ice buildup. Read more

• Freezer not defrosting
• Fridge runs too long

My freezer units back inside panel were icing up and on the refrigerator side it wasn't cooling down to the normal setting. The unit was constantly running and I knew it was one or more of three things. Defrost timer, defrost heater, or defrost thermostat. The timer was good so I ordered a new thermostat and heater from AppliancePartsPros.com. After pulling the rear panel and allowing the ice buildup to drain off, I replaced the heater and thermostat. My issue was a bad defrost heater but a ... Read more

Knowing from a previous repair, that there was only 3 parts that could be bad. I decided if I was going to take it apart to change all 3. Not having the proper test equipment, it was cheaper to replace the 3 parts than pay a repair person. Read more

Your on line video pointed out the problem, how to test, and how to replace the element. I ordered the part it came the next day. Wife is very happy. Read more

Put in new part. It was done by maintenance personal and took just a few minutes. Read more

Replaced evaporator heater and housing. Just make sure you also replace the thermostat. If not it is a little challenging to get the wires out of the old thermostat/ heater plug into the new plug. Also if you have the same problem be prepared to have a good heat gun to melt the ice buildup around the evaporator and drain hole. The ice build up was so bad that it destroyed the evaporator cover and was leaking into the refrigerator or should I say ice was forming below the evaporator cover... Read more

With the help of Wendee and Karen, we finally figured out my model numbers and which parts where correct. I ordered the parts and all arrived the next day except for the Broiler element which arrived in 2 days. I installed the new Baking Element myself. Took longer to figure out which curcuit braker to turn off. In about 30 minutes I had a brand new Baking Element in my oven working perfectly. On the following day, I installed the Broiler Element. That took a bit longer as it sits in a metal... Read more

• Too hot
• tripping breaker

I found the assembly with heater element, thermostat, and the thermal fuse already assembled (cheaper than finding what part was bad and ordering that one part). unplugged dryer, pulled it out and removed the dryer exhaust tube, the top and front. The harness was a little short so I wasnt able to pull the whole heater assembly out before disconnecting. BEFORE disconnecting I took a picture so that if my brain forgot what wires went were!!!! put the dryer back together and put a load that just... Read more

I replaced the two affected burners, and the problem was solved. Read more

Removed the defective burner labeled the leads as to their location and coil connections. Replaced the connections to the corresponding locations, 1 to 1, 2 to 2 and the bridged terminal as it was. I noticed that the coils in the replacement burner were not wound in the same direction as the original burner and made note of this. I did not think much of this at the time, but on turning the power back on and lighting up the burners I noticed up they were not lighting up the corresponding... Read more

I called GE and they sent a tech out. $89 service call. Had I REALLY inspected the oven the hidden element had blown and separated and part of it welded itself to the inside of it's compartment. GE wanted another $350 to come back and fix it. I bought the part here for around $55 and had it running again in about an hour! Read more

Turned stove breaker off in the main breaker box and also unplugged the oven from the 220 outlet. pulled the baking racks out of the oven and proceeded to locate the 1/4 screws just above the bake element where it passes through the metal wall and removed them. pulled the element forward until the wires were exposed and unplugged them and then attached the new element to the wires and reinstalled in reverse order. Read more

Range has no model ID plate anywhere. Flip off electric at circuit breaker box. Opened top of range and noted details of the faulty burner, including confirm that outer coil was fried. The maker info on back of element was useless in finding replacement: more useful was general shape, and the numbers around edge on back. Close up range, since low heat element still working. Turns out all Maytag double oven Gemini ranges use the same hi-low element, but double check appearance just in... Read more

Would advise before doing this repair to watch the video for it. It is not a plug in connection anymore like older ovens. The key is to keep the connecting wires from the oven from falling or pulling into the inner wall of the oven. The wires may not come very far out away from the wall of the oven so make sure to secure them. The video shows a good way to do that. If you have an in wall oven this is very important because it would hard and time consuming to pull the oven out of the wall to... Read more

Replaced the elements with new ones ordered through Appliance Parts Pros. I wanted to tell you how pleased I am that I ordered the baking and broiler elements for my Maytag oven from you. Your website diagrams for my model of oven helped immensely in figuring out what parts I needed. Your order process was easy and the parts arrived within two days just as stated. Best part of all, the new elements work perfectly! I will bookmark your site for future appliance part needs and I look forward to... Read more

Ordered part and installed it. Broiler works as advertised. Read more