Need Help?
Call
The Folding Tine Row Clip is an OEM part for GE dishwashers. It is located on the side of the dishwasher's lower rack and holds the folding tine row securely in position. It ensures that the folding tines, which can be adjusted to accommodate different dish sizes, remain stable during the wash cycle.
Causes of a faulty or damaged folding tine row clip can include regular use, wear and tear, or breakage. These factors can result in issues such as the folding tine row becoming loose or unstable, difficulty in adjusting the tines, or the tines not staying in the desired position.
Symptoms of a bad folding tine row clip may include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replaced all movable parts. Read more
Replacement right adjuster housing for dishwasher upper rack. Holds and supports the right side height adjustment mechanism. Replace if cracked or worn.
I bumped into my KitchenAid dishwasher and the upper rack adjuster cracked. There was already a crack on the notch of the housing where the handle (lever) sits. In addition, the positioner popped out and I couldn't find it. So, I bought the three parts from AppliancePartsPros online. It arrived in about a week. The repair was fairly simple, but it still took about 45 minutes because I didn't want to crack the assemblies. For the housing, use a small slotted screwdriver to carefully... Read more
Replace your cracked, rusted, or broken dishwasher tine row. This adjustable row installs in the upper or lower rack for flexible dish loading.
Order parts and replace. When removing attachments, do them one at a time and install them on new rack as you go. Watch for the small release tabs on the attachments (baskets, rollers and tine holders), "gently" put pressure to release; remember these units have been in hot water and they are brittle. Read more
Secures tines in your dishwasher rack to hold dishes in place during wash cycles. Replace broken, cracked, or missing clips for proper rack function.
I ordreded the tine clip kit. APPros was the least expensive, even with the shipping charge, and I had it in two days. Replacement piece snapped into place with very little difficulty. I also have extras from the kit so I am set if another breaks. Read more
This is a crisper drawer that slides into the bottom section of the refrigerator compartment to store fruits and vegetables at controlled humidity levels. It helps keep produce fresh by maintaining a separate environment from the rest of the fridge. Replace this drawer if it is cracked, warped, or if the slides are broken and it no longer opens and closes smoothly.
Bought a new one! Very fast and helpful service. Read more
Replacement silverware basket for dishwashers. Holds and organizes utensils during wash cycles. Replace if cracked, broken, or falling apart.
Dishes were 'gritty' with an almost invisible coating of specks smaller than grains of salt. Prior to ordering parts, I had to determine which part(s) needed replaced and which could benefit from a good cleaning. After viewing Appliance Parts Pros YouTube Videos, I removed the Main Manifold (snaps right off) including the Top Spray Arm. I discovered the Flappers of the Docking Station (AP6009888) were worn out and/or missing. I removed the Docking Station simply by popping the old one off... Read more
Supports and holds the meat or deli drawer in your refrigerator. Replace if broken, cracked, or worn. Installs on the left or right interior wall.
Ordered left and right side supports and they arrived in two days! It took me longer to get stuff out of the way in the fridge so I could take the shelf out than it did to actually swap out the side supports. Parts fit perfectly and quick easy repair. Read more
Oven rack for electric and gas ranges. Provides a cooking surface inside the oven cavity. Replace if discolored, warped, rusted, or damaged.
Ordered new racks Read more
Replacement upper rack assembly for dishwashers. Holds dishes and glasses in the upper section. Needed when rack is cracked, broken, or wheels are worn.
The part just snaps on the basket. You have to remove the clips on the end of the runner arms to be able to remove the basket. Once it was out the old arm snap off and you snap on the new arm. Only problem was my old arm was fine and I wished the company would just sell the gasket. It seems a waste to have to purchase the whole arm. The complete job took me about 10 minutes from start to finish. I ordered the part online a Sunday afternoon and it arrived at my house on Tuesday. Read more
Plastic support bracket that secures shelves inside your refrigerator door. Replace if cracked, broken, or missing to restore stable storage for bottles.
Easy to replace with the shield and paddle assembly. Steps are: 1. use a flat head screwdriver to push the tabs at the base of the control panel. remove the wire connectors by gently prying them straight off. 2. remove the 4 phillips screws holding in the old assembly. 3. Install the new assembly by carefully putting the paddle behind the water pipe that sticks out. You may have to push the paddle one way to get it around the pipe and then back into place. 4. reinstall the screws. 5. reconnect... Read more
Replacement door bin for refrigerator storage. Installs in the door to hold bottles, condiments, and containers. Order if your bin is cracked or broken.
The new Door Bin was a perfect factory replacement. Exact fit. Read more
Adjusts the upper rack height in your dishwasher. Replace if cracked, broken, or missing. Mounts on the side of the upper rack to control positioning.
Took out 3 torx screws on each side, much of the insides fell out at this point. At this point I had the new part and what was left of the old part and the adjust lever. Screwed them back together and that was that. The new support piece was not needed. Read more
Replace your cracked, broken, or missing refrigerator gallon door bin. Mounts on the door for convenient storage of large items like milk jugs.
Looked at the provided video. PERFECT results. Read more
Repair kit for refrigerator drawer slide mechanisms. Includes gears and rod to replace stripped, broken, or missing components in pull-out drawer rails.
Pulled out storage bin Removed side track rail covers Popped off gear from holding clip Installed drive shaft Installed rail cover and storage bin Only took about 15 minutes Read more
Replacement door bin trivet for refrigerator inner door storage. Holds condiments, jars, and bottles. Replace if cracked, broken, or missing.
Wonderful, replacement part fit perfectly. Read more
Replace your cracked or broken refrigerator drawer glide. Mounts to the interior wall to support smooth drawer sliding. Essential for worn or damaged glides.
Ordered and installed new ones. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.