Power Nut Installation Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 134716700
Washer that fits between the support roller and shaft in your dryer. Replace if worn, cracked, or missing to maintain proper drum alignment and support.
More
$1.36
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 316021109
Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.
Do-It-Yourself Stories from Customers like You
Bent oven door frame. Broken vent cover. Broken handle. Mitchell M. • Southaven , MS • January 12, 2022
Got new pieces, put it back together like it never happened.
Read more
More
$13.54
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: W10817436
This factory-spec screw secures panels and components in your appliance. Replacing a missing or stripped fastener restores a tight, rattle-free fit so parts stay aligned and operate as designed.
- Fastens brackets, panels, and internal components to their mounting points
- Maintains alignment and reduces vibration during operation
- Replaces missing, worn, rusted, or stripped hardware
- Helpful when you notice rattling, loose panels, gaps, or parts shifting out of position
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supply if applicable
- Align the part being secured and remove any damaged hardware
- Hand-start threads to avoid cross-threading; tighten with the correct driver
- Do not overtighten; verify the assembly is secure and operates freely
Do-It-Yourself Stories from Customers like You
Wheel tub broken. Paul K. • Belleville , NJ • January 11, 2019
Replaced Wheel-Tub.
Read more
More
$8.72
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: W11165163
The Electrode is an OEM replacement part for Whirlpool dryers. It is responsible for detecting the moisture levels in your laundry during the drying cycle, allowing the dryer to automatically adjust the drying time and temperature. It helps prevent over-drying or under-drying of your clothes, saving energy and protecting them from potential damage.
A bad electrode can occur due to wear and tear, damage, or a buildup of debris or lint. If you notice symptoms such as clothes taking longer to dry, the dryer shutting off prematurely, or inconsistent drying results, it may be time to replace the moisture sensor bar electrode.
Symptoms of a bad electrode include:
- Clothes taking longer to dry than usual
- The dryer shutting off prematurely
- Inconsistent drying results, with some items remaining damp
Repair your dryer by replacing the faulty or damaged electrode with this genuine OEM part.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
More
$50.57
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WE2M163
This is a small screw, and it is made for dryers, washers, and washer dryer combos. This is a genuine replacement part made by General Electric. Screws are common in these appliances and can cause many difficulties if they become loose, damaged, or missing.A new screw might be needed if there are areas in the appliance that seem off balance or not level. Another way to tell if a new screw is needed is if there are parts in the appliance that are loose or falling off. This is common over many years of normal use as the shaking of washers and dryers can eventually lead to loose screws. Be sure the washer or dryer is completely off before attempting to replace any screws.This is an OEM part sourced directly from the manufacturer. It is sold individually and is compatible with washers, dryers, and washer dryer combos made by General Electric.
Do-It-Yourself Stories from Customers like You
Missing a dryer drum screw Robbie B. • San Luis Obispo , CA • October 24, 2016
Replaced the screw
Read more
More
$11.10
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP31001192
If your dryer is overheating, running too hot, or taking extended times to dry clothes, a faulty cycling thermostat is often the cause. Easy DIY fix.
Do-It-Yourself Stories from Customers like You
No heat on dryer low setting insufficient drying even on high extended times to dry Thomas M. • Galax , VA • June 12, 2016
Ended up replacing the cycling thermostat which corrected the problem. Andrew C. was very helpful with considerations and return of unneeded parts as well as very informative technical assistance. Could not have been treated better.
Read more
More
$79.24
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WE2M174
This replacement screw secures appliance panels and internal components per your model's hardware list. Replace lost or stripped screws to keep assemblies tight, reduce vibration and rattles, and maintain proper alignment.
- Fastens brackets, covers, and sheet-metal panels as specified in the parts diagram
- Restores proper fit when an original screw is missing, stripped, or damaged
- Helps eliminate rattling or vibration from loose hardware
- Keeps components safely in place during operation
What's included: 1 screw Install notes:
- Disconnect power to the appliance before servicing
- Match length, head style, and thread to the original; install in the same location/quantity
- Start threads by hand to avoid cross-threading; tighten with the correct driver
- Do not overtighten, especially into plastic or thin sheet metal
Do-It-Yourself Stories from Customers like You
Two baffles had torn out as the screw heads came through the holes Scott B. • Katy , TX • December 21, 2015
I ordered two new baffles and 7 screws. I also ordered 6 large washers. We were running with one baffle held by only 2 of 3 screws. It appears that a repairman in the past had removed the large washers and over time, the screw heads reamed out the hole, causing the baffles to detach and break. In about 15 minutes, I was able to tighten up the existing baffle and add the two new ones. I also added the 6 big washers to help strengthen this to prevent future issues. I no longer have to listen to...
Read more
More
$12.38
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8566498
Dryer not heating or taking too long to dry? This high-limit thermostat monitors temperature and cuts power when it gets too hot. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Dryer not heating Jeffrey F. • Apex , NC • September 16, 2017
Our dryer seemed to be taking a long time to dry, often needing a couple cycles to complete the job. Then one day it stopped heating at all. After watching a couple videos and testing with a multimeter I figured out not only the thermristor had blown (can happen due to bad airflow) but also half the heating element was shot. I ordered both parts for overnight delivery and received them at noon the next day. Replacement was easy and the dryer is good again.
Side note: After the repair was...
Read more
More
$51.62
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Lg part
By: Lg
Part Number: 6323EL2001C
This NTC thermistor is the dryer's temperature sensor. It monitors exhaust air temperature and signals the control to cycle the heat, restoring accurate drying performance and helping prevent overheating, underheating, and inconsistent results.
- Monitors exhaust air temperature by changing resistance as heat rises (NTC behavior)
- Sends temperature feedback to the control to regulate the heater or gas valve
- Failure can cause no heat, overheating, or erratic temperatures
- May lead to long dry times, short cycles, or temperature-related error codes
What's included: 1 thermistor Install notes:
- Disconnect power and, for gas models, shut off the gas supply before servicing
- Access the sensor on the blower housing or exhaust duct; location varies by model
- Note wire routing; unplug the harness connector; remove the mounting fastener/clip; install the new sensor fully seated and reconnect
- Reassemble, restore power, and run a test cycle; check and clean venting to ensure proper airflow
More
$31.32
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Speed Queen part
By: Speed Queen
Part Number: D513737
This replacement moisture sensor bar mounts inside the drum and helps the dryer detect when laundry is dry. A worn or damaged bar can cause sensor-dry cycles to end too soon or run too long.
- Senses moisture on fabrics and signals the control to advance or extend auto-dry cycles
- Helps stop the cycle when clothes reach the selected dryness level
- Symptoms can include auto-dry cycles ending early, extended run times, or inconsistent dryness
- Build-up on the bars can also affect sensing performance
What's included: 1 moisture sensor bar Install notes:
- Disconnect power before servicing; shut off gas supply for gas dryers
- Access the sensor at the front bulkhead/lint housing; move wire leads to the new bar and secure with existing hardware
- Clean any residue from both sensor bars to improve accuracy
- Reassemble and test with a small damp load on a sensor cycle
More
$6.41
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 137380600
M5 x 0.8 metric machine screw secures panels and internal assemblies. Replace missing, stripped, or damaged fasteners to restore tight fit.
Do-It-Yourself Stories from Customers like You
The hinge on our frigidaire front load washer wore out and broke Vivian D. • Englewood , FL • April 03, 2016
We disassembled the washer door to follow nod out exactly what parts we would need to properly repair it. We discovered Appliance Parts Pros online and found the prices to be reasonable. We placed our order and within 72 hours the parts arrived. We are pleased with appliancepartspros.com
Read more
More
$10.38
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WD01X10383
Connects portable dishwashers to standard kitchen faucets. Replace if cracked, stripped threads, or missing from your unit for secure water supply.
Do-It-Yourself Stories from Customers like You
Washer didn't come with adapter Daniel Z. • Baltimore , MD • May 04, 2015
I don't usually write reviews but the customer service from the site was amazing item was bought on a Tuesday and at my house on Wednesday nothing really else to say besides that
Read more
More
$42.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Lg part
By: Lg
Part Number: 4011FA4353B
Secures the stator to the motor assembly in your washer. Replace if bolt is stripped, spinning freely, or missing to restore proper motor stability.
Do-It-Yourself Stories from Customers like You
The washer sounded like a jet plane when it went through the spin cycle very loud noise Lane C. • Pleasant Garden , NC • February 24, 2015
I originally thought the washer had a bad bearing, but once I got it disassembled it the spider arms were broken. This required the replacement of the tub assembly. While replacing the tub I replaced all of the water bellows. The parts came quickly, the live chat and videos were very helpful. This washer has to be completely disassembled to replace the drum, so mark all the screw locations, tag and bag everything and take lots of pics. It was a very rewarding project and hundreds of dollars...
Read more
More
$11.60
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 814103
This metal clip secures and stabilizes surface burner components on gas cooktops. It prevents burner parts from shifting during cooking and ensures proper alignment for safe gas flow. Install this clip if burner grates move during cooking, flames appear uneven, or burner parts seem loose or misaligned.
Do-It-Yourself Stories from Customers like You
Oven element Albert M. • Keyport , NJ • April 05, 2016
Two screws old one out new one I in. Took 10 min. Ordered Parton Friday recieved part on Saturday. Great service.
Read more
More
$9.63
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY304474
If your dryer takes too long to dry or overheats, the cycling thermostat may have failed. This part regulates heat by cycling on and off. Easy DIY fix.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
It was taking unusually long to dry a typical load Robert L. • Williamsburg , VA • November 15, 2014
I removed the front panel and observed the heating element while running the dryer. It was cycling off every minute or so and staying off for several minutes. Even though it was likely the high temp cycling thermostat I replaced both the 14, and 15 cycling thermostats which I think are the original factory units. That makes them nearly 35 years old. Problem fixed.
Read more
More
$54.25
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 240442708
Secures panels, brackets, and handles in refrigerators and other appliances. Replace missing or stripped screws to restore secure mounting.
Do-It-Yourself Stories from Customers like You
Lost screws in a move Barbara M. • Anthony , KS • February 24, 2016
Ordered the screws needed from your website and put the doors back on the frig.
Read more
More
$9.23
IN STOCK
Most orders arrive by Wednesday, November 25