Timer Number131436800 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001252
Fix a washer that won't advance through cycles, stops mid-wash, or skips stages. This mechanical timer controls wash, rinse, and spin sequences.
Do-It-Yourself Stories from Customers like You
10+ year old bad washing machine timer Johnny Q. • Philadelphia , PA • January 18, 2015
Took out old timer, and upon inspection notice some electrical arcing( burned areas). I installed new timer and worked perfectly.
Problem was that it would fill up with water, but after it was filled the timer kept going but washer was not agitating. Only thing that worked was delicates wash.
Important Disconnect/ unplug power cord!
1. Remove knob, center cap pops off revealing a pin. Slide that off and the knob should come off.
2. Removing knob should reveal 2 socket screws remove...
Read more
More
$205.95
- Compare At:
-
$245.08
- You Save:
-
$39.13
Genuine Ge part
By: Ge
Part Number: WB27X44728
Fix unresponsive oven controls or blank displays with a new electronic control board. Restores temperature settings and cycle functions on gas ranges.
More
$90.47
- Compare At:
-
$108.56
- You Save:
-
$18.09
Genuine Ge part
By: Ge
Part Number: WH12X950
Fix a washer that won't advance through cycles or stops mid-cycle. This timer controls cycle duration and sequencing in your washer dryer combo unit.
Do-It-Yourself Stories from Customers like You
Washer would not drain L. H. • Jackson , MS • May 20, 2019
Replace timer; remove lid switch
Read more
More
$265.70
- Compare At:
-
$316.18
- You Save:
-
$50.48
Genuine Lg part
By: Lg
Part Number: EAM60991316
This is an electronic noise filter assembly that mounts on the dishwasher's power supply line. It suppresses electromagnetic interference generated by the dishwasher's motor and electronic controls, preventing it from affecting other appliances or electronics on the same circuit. Replace this part if the dishwasher trips breakers, fails to power on, or if you notice electrical interference with nearby devices when the dishwasher is running.
Do-It-Yourself Stories from Customers like You
No power. Semso M. • Tucker , GA • January 18, 2021
Replaced noise filter.
Read more
More
$84.95
- Compare At:
-
$101.09
- You Save:
-
$16.14
Genuine Whirlpool part
By: Whirlpool
Part Number: W10769823
Range won't heat or display is blank? The electronic control board coordinates all oven functions. DIY replacement in 10-30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Electronic oven control unit went out Gary R. • Louisville , KY • April 30, 2016
Oven is a slide in. I pulled it out just a
Few inches and removed 8 screws and
Pulled the face down to expose the unit.
The control unit had 4 screws and 4
Plugins. It only took me less than 10
Minutes to replace unit and slide back
In place.
Read more
More
$212.58
- Compare At:
-
$233.84
- You Save:
-
$21.26
Genuine Whirlpool part
By: Whirlpool
Part Number: 5701M760-60
Oven won't heat, display blank, or controls unresponsive? Replace the electronic control board. DIY-friendly repair, typically 30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Oven will not heat or self clean John G. • Leicester , NC • October 09, 2014
Replaced with part No.AP4417276 electronic control board that we ordered from you and replaced it ourselves with your professional assistance. This has been an excellent experience with your company, and your return policy.
Thank you .
Read more
More
$300.95
- Compare At:
-
$358.13
- You Save:
-
$57.18
Genuine Ge part
By: Ge
Part Number: WH12X10202
If your washer won't shut off or won't advance through cycles, the timer may have failed. This repair typically takes 10-15 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Washer did not shut off and did not cycle properly Dan F. • Gig Harbor , WA • August 10, 2014
Easy. Opened the front panel, removed the timer, went on line with the part number. Part arrived the next day and I installed it in 2 minutes. FIXED.
Read more
More
$229.95
- Compare At:
-
$273.64
- You Save:
-
$43.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WP5760M302-60
This electronic control board with overlay manages your range or wall oven's heating and user interface. Replacing a failing control restores accurate temperature regulation, proper bake/broil operation, and a readable display so the appliance responds as it should.
- Regulates oven heat by switching bake/broil circuits based on temperature sensor feedback
- Powers and displays the clock, timer, and status messages
- Interprets keypad/touchpad inputs to run bake, broil, and clean cycles
- Common failure symptoms: dark or flickering display, unresponsive buttons, oven won't start or maintain set temperature, or error codes
What's included: Electronic control board and matching faceplate overlay
- Disconnect power at the breaker before servicing; verify no voltage present
- Use ESD precautions and handle the board by its edges
- Photograph/label wiring; move connectors one at a time to the new board and seat fully
- After installation, run any model-specific checks or calibrations per the service/tech sheet
Do-It-Yourself Stories from Customers like You
The oven was not staying up to set temperature Pat M. • Kansas City , MO • December 05, 2023
I first tested and replaced the temperature sensor. Since this is a slide-in range, I managed to pull it out just enough to access the back without disconnecting the downdraft and gas line. (For wall models this would not be the case.) Unfortunately, that did not do it. Next I replaced the lower heating element because it was a little below the ohms level it should be at. No go. So far, both of these were pretty easy to do and were relatively inexpensive so I wasn't too frustrated. Then I...
Read more
More
$343.57
- Compare At:
-
$408.85
- You Save:
-
$65.28
Genuine Ge part
By: Ge
Part Number: WB27X32849
The Relay Board is an OEM part for GE microwaves. It controls the passage of proper voltage levels for various microwave components during operation.
Installed internally, this board transmits power signals to run the magnetron, fan, and lighting systems as directed by the selected cooking settings. Precise switching of voltages is required for consistent and balanced microwave radiation.
Symptoms of a faulty relay board include:
- Intermittent or unpredictable power level adjustments
- Magnetron fails to turn on or fluctuates excessively
- Light not illuminating properly
- Fan speed irregularities
- Microwaves not properly heating foods
Causes can be damage from liquid intrusion, heavy usage over time stressing the relays, or component failures within the board itself.
Replacing with this genuine OEM GE part restores optimized power routing to maintain consistent microwave functions. Compatible models also include some Hotpoint, RCA, and select Kenmore products.
Do-It-Yourself Stories from Customers like You
Our microwave stopped working the only indication of power was the turntable would rotate with the door closed ther were no other visible signs of power to the unit Merle D. • Tucson , AZ • August 15, 2017
I contacted Appliance Parts Pros, and told them what the problem was and what it was doing.
They sent me an email with the parts number needed to complete the repair.
This was a built in a cabinet unit and I required help removing it and reinstalling it.
The repair was relative easy once I had the parts and it took approximately four hours,.
It took longer getting to the defective parts than replacing them. ...
Read more
More
$92.95
- Compare At:
-
$110.61
- You Save:
-
$17.66
Genuine Ge part
By: Ge
Part Number: WD12X10353
Dishes not getting clean in the upper rack? A worn middle spray arm hub prevents proper rotation and water distribution. DIY fix in 15 minutes.
Do-It-Yourself Stories from Customers like You
Dishes were not getting clean; i noticed that the middle spray arm was not working; but also other spray arms appeared to have residue in the irrigation holes Margaret O. • University Heights , OH • November 08, 2014
I did an internet search - found your site explaining how to fix. I purchased the upper, middle, and lower spray arms - It took about 15 minutes total. Very very easy. No more dirty dishes!
Read more
More
$3.95
- Compare At:
-
$33.56
- You Save:
-
$29.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001026
If your washer won't advance cycles, runs continuously, or only works on delicate, the timer may have failed. DIY-friendly repair in 15-20 minutes.
Do-It-Yourself Stories from Customers like You
My maytag washing machine model# latxxxxaae would not agitate on wash cycle William C. • Grafton , MA • February 03, 2015
The basin would fill but would not agitate, there was no sound, no grinding noises, no sound of a motor running without agitation due to a broken belt. The basin full of water was able to drain if I advanced the timer to Spin. By playing around with the timer dial further, I could get every function of the washer to operate, at least partially. So, that said electrical problem to me. I assumed the trouble was either the safety switch at the back of the lid or the timer mechanism. Tested...
Read more
More
$186.34
- Compare At:
-
$223.61
- You Save:
-
$37.27
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67001036
Freezer icing up or fridge warm while freezer works? The defrost timer controls defrost cycles. DIY-friendly fix in about 1 hour, saves $150+ on service.
Do-It-Yourself Stories from Customers like You
I had no cooling in the upper ( not freezer) section of my frige Alexander M. • Gloucester , MA • August 23, 2015
I had had the same problem 4 or 5 years ago and spent close to $200 to repair it.
I did have the slip from that repair with part #'s so I went ahead and ordered a defrost timer and thermostat.
You-tube had plenty of videos on replacing those parts and even before they arrived I was able to add a switch and bypass the broken thermostat and start a cycle manually with the timer. (which it seems was was still functional).
Between that and cycling some ice packs up from the still working...
Read more
More
$114.48
- Compare At:
-
$136.23
- You Save:
-
$21.75
Genuine Ge part
By: Ge
Part Number: WB27T10919
Fix an oven with a non-responsive display, dead clock, or inaccurate temperatures. This control board restores heating cycles and timer functions.
Do-It-Yourself Stories from Customers like You
The oven controls stopped working only the clock was working Roy K. • Aransas Pass , TX • November 13, 2017
I replaced the main control unit
Read more
More
$310.66
- Compare At:
-
$369.69
- You Save:
-
$59.03
Genuine Bosch part
By: Bosch
Part Number: 00676960
Fix a dishwasher that won't complete cycles or runs indefinitely with this control board. Controls all wash cycles and functions. 30-minute repair.
This part fixes the following symptoms
-
Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You
Stuck in 01 and wouldn't pump out & finish and shut off Harvey D. • Madison , CT • September 02, 2017
I ORDERED A NEW CONTROLLER BOARD. THE DIRECTIONS SHOWED HOW TO UNCLIP THE OLD BOARD BUT THE FASTENERS WERE ON THE LEFT SIDE NOT THE BOTTOM AS INDICATED ON THE REPAIR INSTRUCTIONS. AFTER REASSEMBLY THE DISHWASHER FUNCTIONED AS NEW. THNKS FOR THE INSIGHT.
Read more
More
$229.95
- Compare At:
-
$273.64
- You Save:
-
$43.69
Genuine Frigidaire part
By: Frigidaire
Part Number: 316455461
Fix a burned-out clock display or unresponsive temperature controls with this oven electronic control board. Restores heating and timer functions.
Do-It-Yourself Stories from Customers like You
Wall oven control: hard to change temps and led clock/temp had burned out sections Thomas C. • Orland Park , IL • December 08, 2015
Ordered the part from Appliance Part Pros. It came in one day! Had to disconnect the gas line and wrestle the unit out of the wall cabinet, but the repair was easy and straightforward. The job took less than an hour
Read more
More
$241.77
- Compare At:
-
$287.71
- You Save:
-
$45.94
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304516117
This is an electronic control board that mounts inside the range and manages oven functions such as temperature regulation, bake and broil cycles, and display operation. It receives input from the touchpad or control panel and sends signals to heating elements and other components. Replace this board if the oven fails to heat, displays error codes, has an unresponsive control panel, or behaves erratically during cooking cycles.
Do-It-Yourself Stories from Customers like You
Blown oven igniter went "poof!" with smoke at end of bake Peter M. • Salt Lake City , UT • March 04, 2022
So initial thought was bad bake igniter. I'bve replaced this before so I replaced it again and it wouldn't glow. Checked broil igniter and same thing, no glow. Checked voltage at molex connector for bake igniter and it went from 6.6v to 3.4v when triggered to glow -- well below the 120v expected.
Ordered new clock/controller and overlay -- it shipped the next business day!
Removed a handful of screws from the back panel to expose the clock/controller and removed/ replaced it with new...
Read more
More
$203.61
- Compare At:
-
$242.30
- You Save:
-
$38.69