Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Bath Fan Switch Parts

Best Seller
Refrigerator Evaporator Fan Blade
Genuine Ge part
By: Ge
Part Number: WR60X10205

Freezer fan loud or not spinning? This evaporator fan blade circulates cold air over the coils. DIY-friendly repair with our video guide.

This part fixes the following symptoms
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Noisy fan   Robert M. W. • Palmetto , FL • October 29, 2016

I had found that the fan in the freezer was making a lot of noise. Turns out the shaft was loose, causing the flan blade to wobble. Replaced the motor and fan and now it runs like a new unit. Read more

More
$21.36

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Refrigerator Condenser Fan Motor
Genuine Ge part
By: Ge
Part Number: WR60X187

Refrigerator not cooling or compressor overheating? The condenser fan motor circulates air through coils to dissipate heat. DIY repair in under 30 minutes.

This part fixes the following symptoms
  • Freezer section too warm
  • Noisy
  • Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You Side by side fridge had stopped cooling in both fridge and freezer and was hot to touch in center between the two   Robert P. • King , NC • August 11, 2015

I googled the issue and read several articles. Most started with cleaning the coils (which mine are on the bottom) (19yr old Kenmore 363.9557812). I had not really ever cleaned them well, vacuuming did little. I had to remove the cardboard cover off the back of the frig, and blew them clean (front to back). Once that was done, I started cleaning from the back and noticed the fan wasn't turning week (condensor fan). Blew it out too, have it a good soon with a pencil, it puffed out a bunch of... Read more

More
$251.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Micro Switch
Genuine Ge part
By: Ge
Part Number: WB24X10146

The Micro Switch is an OEM part for GE microwaves. This part ensures the appliance operates only when the door is securely closed. It controls the electrical circuit, allowing the microwave to start heating food when the door latch engages the switch.

Causes of a bad micro switch can include wear and tear from frequent use, electrical issues, or physical damage from slamming the microwave door.  

Symptoms of a bad micro switch include:

  • The microwave not starting or stopping unexpectedly
  • The microwave running even with the door open
  • Intermittent power issues
  • The door not latching or the microwave indicating the door is open

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Stopped working tripped breaker   Roberto M. • Pembroke Pines , FL • March 08, 2019

By replacing the switches. Read more

More
$41.51

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Electric Range Infinite Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10312185

Burner stuck on high heat or won't regulate temperature? This infinite switch restores precise control. Straightforward DIY repair with a screwdriver.

Do-It-Yourself Stories from Customers like You Bad oven knob sensor was causing circuit breaker to trip   Kelly V. • Rockaway , NJ • December 27, 2019

Replacing the oven knob sensor was easy. Figuring out it was the sensor causing the circuit breaker to trip was the challenge. Read more

More
$87.35

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Range Infinite Control Switch
Genuine Ge part
By: Ge
Part Number: WB24T10063

Fix a burner stuck on high or not heating with this infinite control switch. Common cause when burners won't adjust temperature. DIY repair in 20 minutes.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You Burner only worked on high setting   Alejandro G. • East Meadow , NY • February 15, 2016

Ordered recommended part for GE appliance. Change was very simple. Followed instructions on video and removed one wire at a time. Very easy to change 5 to 10 minutes. Read more

More
$85.37

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Cooktop Burner Switch Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 700855K

Fix burners that won't turn on or heat up with this burner switch kit. Includes mounting hardware and instructions. Easy 30-minute DIY repair.

This part fixes the following symptoms
  • Won't start
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You The burner switches were not controlling the burners correctly specifically the lo temps were too high the switch knobs were also worn   Frank C. • Sunset Beach , NC • December 24, 2019

1) I installed 4 ea new Whirlpool 700855K switches. (The old switches had INF-240P-871 stamped on them. 700855K was the cross-referenced P/N.) The installation was easy. There is slight difference in the terminal arrangement: 1) the old switch has raised terminals whereas the new switch has recessed terminals (for safety), and 2) the terminal markings are slightly different: The old switch has L1/L2/P/H1/H2 (5 terminals). The new switch has L1/L2/P/HC/H1(Also five terminals. I saw where one... Read more

More
$84.40

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Refrigerator Evaporator Cover Assembly
Genuine Samsung part
By: Samsung
Part Number: DA97-11823A

The Refrigerator Evaporator Cover Assembly is essential for maintaining the optimal performance of your Samsung refrigerator. This genuine OEM part ensures a perfect fit and reliable functionality, seamlessly integrating with your applianceGÇÖs cooling system. Designed to protect the evaporator coils, it helps regulate airflow and prevent frost buildup, which can enhance the efficiency of your refrigerator. By replacing a damaged or worn-out cover assembly, you can restore your fridgeGÇÖs ability to maintain consistent temperatures, ensuring your food stays fresh longer. The durable construction of this evaporator cover assembly guarantees long-lasting performance, reducing the need for frequent repairs. Easy to install, it allows you to quickly get your refrigerator back to working condition without the hassle of complicated procedures. Compatible with a wide range of Samsung refrigerator models, this genuine OEM part provides peace of mind by delivering the quality and reliability you expect from the brand. Improve your refrigeratorGÇÖs functionality and extend its lifespan with the Refrigerator Evaporator Cover Assembly .

Do-It-Yourself Stories from Customers like You I was hearing the constant sound of defrosting from my french door samsung refrigerator and read online that it was probably icing up   William S. • Virginia Beach , VA • October 09, 2015

I bought the defrost-clip (clip-drain-evap), but once I took the refrigerator apart--the large plastic "back" had frozen to the rest and left the insulation in pieces when I tried to pull it apart. I was able to replace the clip-drain-evap piece with little trouble once the ice had melted, but I was unhappy with the looks of the "back". So I ended up ordering a new "back"(Yassy cover-evap) that included the new insulation as it's made in one unit. Once it arrived, replacing the new "back"... Read more

More
$220.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Refrigerator Evaporator Fan Motor
Genuine Lg part
By: Lg
Part Number: EAU65058315

Refrigerator not cooling or freezer frosting up? The evaporator fan motor circulates cold air through your fridge. Moderate DIY repair for bottom-mount models.

Do-It-Yourself Stories from Customers like You Ffe evaporator motor   David K. • Cheswick , PA • December 06, 2024

Replace with new one Read more

More
$102.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Timer Resistor
Genuine Ge part
By: Ge
Part Number: WE4M255

Fix a dryer timer that won't advance or automatic cycles that stopped working. This timer resistor regulates cycle duration. Easy 15-minute repair.

Do-It-Yourself Stories from Customers like You Dryer would not shut off at end of any cycle   Jeffrey S. • Davis , CA • January 15, 2018

I Replaced the power resistor. The old resistor had a small burnt spot and tested infinity for resistance.The terminals were too small so I had to make new connector. Any 5000 ohm ceramic filled resistor would have worked also. Read more

More
$34.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Flame Sensor
Genuine Ge part
By: Ge
Part Number: WE4X448

The Flame Sensor is an OEM part for GE dryers. This part detects the presence of a flame in gas dryers, ensuring that the gas ignites properly for safe and efficient drying.

Causes of a bad flame sensor can include regular wear and tear, carbon buildup from the gas flame, or electrical malfunctions.

Symptoms of a bad flame sensor include:

  • The dryer not heating or taking longer to dry clothes
  • The dryer shutting off unexpectedly during a cycle
  • The igniter glowing but not igniting the gas
  • Error codes related to heating or ignition issues

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You Dryer heating for only a short time then no heat at all   David N. • Fairfax , CA • December 08, 2018

GE Gas Dryer Model DBVH512GF1WW began to heat for only a short amount of time so drying clothes took WAY too long. Read online that the first thing to replace are the solenoids. Bought the two solenoids from AppliancePartsPros.com for about $50 total, and it seems to have fixed the problem. Had to watch a few videos to learn to disassemble the dryer, and the job took a couple of hours, but now that I know what I'm doing it could be done in less than 30 minutes. Also, the old solenoids tested... Read more

More
$79.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Washer Water Level Pressure Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: W10339251

Fix a washer that overfills, won't fill to the right level, or floods. This water level pressure switch monitors tub water. DIY install in 1 hour.

This part fixes the following symptoms
  • Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You Water level control wouldn't work   Micheal W. • Millville , UT • April 11, 2014

I replaced it and the new one fit perfectly. reassembled and fired it up. Worked as desired, like new... Read more

More
$142.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Refrigerator Air Handler Housing And Seal Kit
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303918784

Ice buildup in fresh food section or around evaporator? This air handler housing kit stops warm-air leaks that cause frost and temperature swings. 30-min repair.

Do-It-Yourself Stories from Customers like You Ice build up in fresh food compartment rust on back of refrigerator in upper right hand corner   Pw M. • Palos Heights , IL • April 01, 2021

I removed the fresh food ice maker found the drain tube for ice maker frozen. This was causing the back of the unit to rust out. This also caused the water to run down the back of the unit the into the duct work and into the freezer causing ice buildup. I then defrosted the freezer removed the rear duct work and the freezer drain pan cover. I found the freezer drain was not draining. I removed the exterior rear cardboard cover and located the freezer drain tube removed it and found that it was... Read more

More
$82.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Refrigerator Evaporator Fan Motor
Genuine Ge part
By: Ge
Part Number: WR60X26085

Freezer cold but fridge warm? A failed evaporator fan motor stops cold air circulation. This motor replacement takes 1-2 hours with basic tools.

Do-It-Yourself Stories from Customers like You My ge refrigerator had cold freezer but a warm refrigerator section   Robert K. • Devon , PA • July 10, 2016

I first watched U-Tube tutorials for an hour that addressed the defect and demonstrated the typical repair formats. There could be 4 separate components that required careful testing to determine which part had failed. I called GE service and they sent a technician to inspect my refrigerator and diagnose the problem and identify the defective component which was the evaporator fan motor. I watched the tech. take apart my freezer and saw the technique. That step cost $100.00. The tech... Read more

More
$63.65

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Washer Pressure Sensor Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304505436

Fix E11 error code and washer not filling issues. This pressure sensor switch monitors water levels and signals the control board. DIY repair in under an hour.

Do-It-Yourself Stories from Customers like You Washer would not let hot or cold water in diagnostic tests. Allowed both hot and cold water in had 120v on 5vdc fill sensor.   Wayne K. • Stockbridge , MI • March 21, 2020

Replaced fill sensor and Main control board. Payed next day shipping and washer was up and running an hour after receiving the parts. Read more

More
$53.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Refrigerator Evaporator Fan Motor
Genuine Whirlpool part
By: Whirlpool
Part Number: W11249952

Freezer not cooling or temperatures too warm? This evaporator fan motor circulates air past cooling coils. Common fix for intermittent fan operation.

Do-It-Yourself Stories from Customers like You Loud evaporator fan and PF error code   Daniel B. • Parker City , IN • July 03, 2019

Evaporator fan was loud and eventually quit. This allowed the freezer temp to rise above 18 deg. which they activated the PF code. Replacing the evaporator fan motor fixed the problems. Read more

More
$97.26

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Return Switch
Genuine Ge part
By: Ge
Part Number: WC21X20249

The Return Switch is an OEM part for GE trash compactors. This part ensures that the compacting ram returns to its starting position after each compaction cycle.  

Causes of a malfunctioning return switch can vary from electrical issues, such as short circuits or worn-out connections, to mechanical problems, including physical damage from wear and tear or blockages preventing the switch's activation.  

Symptoms of a faulty  Return Switch include:

  • The compactor ram fails to return to its original position after a compaction cycle.
  • The unit does not start or operate correctly, indicating issues with the cycle initiation.
  • Unusual noises or behavior from the trash compactor, suggesting that the ram is not aligning or moving as expected.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The trash compactor would not cycle without me holding kick plate up for whole cycle when it did get back to the top of the cycle it would only stop if i opened the door   Mike D. • Pine Mountain , GA • December 15, 2014

TALKED TO YOUR REPRESENTATIVE AND WE WENT THROUGH ALL THE ON/OFF AND LIMIT SWITCHS. NARROWED IT DOWN TO TWO SWITCHS. THE ON/OFF SWITCH AND THE LIMIT SWITCH ON THE DOWN CYCLE SIDE. REPLACED ON/OFF AND DETERMINED THAT THAT WAS NOT THE ISSUE. THEN UNCOVERED LIMIT SWITCHS AND REPLACE DOWN SWITCH, FIXING THE PROBLEM Read more

More
$10.79

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google