Hardware Hand Small Engine On-Off Switch Parts
Genuine Ge part
By: Ge
Part Number: WB24T10071
The Switch Gas Valve is an OEM part for GE ranges. It is responsible for controlling the flow of gas to the burners, allowing them to ignite and maintain a steady flame for cooking.
Causes of a bad switch gas valve can include wear and tear over time, buildup of debris or grease, or damage from repeated use or accidental impact. These issues can hinder the valve's ability to regulate gas flow effectively.
Symptoms of a bad switch gas valve include:
- Burners not igniting
- Irregular or weak flame
- Gas odor near the stove
- Inconsistent burner performance
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
One of my gas range's was not igniting Mark M. • Centennial , CO • June 23, 2014
Bought this switch gas valve for the non-functional burner, and it cleared right up.
Read more
More
$50.64
- Compare At:
-
$59.76
- You Save:
-
$9.12
Genuine Bosch part
By: Bosch
Part Number: 00189008
Burner won't spark or ignite? This spark switch signals the ignition module to light gas burners. Common DIY repair with basic tools, 15-30 minutes.
Do-It-Yourself Stories from Customers like You
Ignition spark would not work n one burner Shenton O. • Seattle , WA • September 28, 2017
Took out igniter module and porcelain was cracked. Replaced with ordered part and it worker fine!
Read more
More
$35.95
- Compare At:
-
$43.14
- You Save:
-
$7.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10441696
Burner won't regulate heat or stays on constantly? The infinite switch controls burner temperature settings. Most DIYers replace it in 15-20 minutes.
Do-It-Yourself Stories from Customers like You
Bad burner control Larry T. • Rose Hill , KS • May 14, 2018
Replaced the control that I think was bad from the purchase of the stove new as the burner didn’t throttle as is does now.
Read more
More
$79.95
- Compare At:
-
$94.34
- You Save:
-
$14.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293831
Burner overheating or stuck on high? This infinite switch regulates temperature by cycling power on and off. Common fix for unresponsive heat control.
Do-It-Yourself Stories from Customers like You
Defective switch elements burned out Leslie G. • Columbia , SC • March 18, 2019
I had one element that would operate wide open when turned on the low setting. It needed the switch replaced. Since I was replacing other elements I went ahead replaced them all, adding new drip pans and wiring kits to each new element. Once I replaced everything I was still having issues with the element that had the switch replaced. After further investigation my AC voltage readings were not correct at this element. I traced the problem back to the Molex connector feeding voltage to the...
Read more
More
$73.95
- Compare At:
-
$88.00
- You Save:
-
$14.05
Genuine Frigidaire part
By: Frigidaire
Part Number: 318601500
The Control Switch is an OEM part for Frigidaire ranges. This part regulates the heat output of the range's burners. By turning the control knob, users can adjust the temperature to their desired level, ensuring precise cooking results.
Causes of a bad control switch can include electrical malfunctions, wear and tear from frequent use, or damage due to overheating.
Symptoms of a bad Control Switch include:
- Inconsistent or fluctuating burner temperatures
- Burners not turning on or off properly
- Difficulty in adjusting the temperature settings
- The control knob feeling loose or unresponsive
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The oven would start for about 10 20 seconds, then beeps turns off and give "err" code on screen. Terry B. • Pearland , TX • June 21, 2022
I changed out the oven temp probe located inside the oven, and I also changed out the temperature control which is located behind the oven temperature control knob. The whole process was simple, but it took a little bit of time since we repaired it ourselves and had to located these parts inside the oven.
Read more
More
$55.58
- Compare At:
-
$66.14
- You Save:
-
$10.56
Genuine Frigidaire part
By: Frigidaire
Part Number: 134813663
Dryer won't start or stops mid-cycle? This door switch detects when the door is closed, allowing your dryer to run. Simple DIY fix in 15-30 minutes.
More
$52.68
- Compare At:
-
$62.69
- You Save:
-
$10.01
Genuine Whirlpool part
By: Whirlpool
Part Number: W10339334
Fix a washer that won't fill properly or overfills with this pressure switch. Controls water level sensing. DIY-friendly repair, about 5-10 minutes.
Do-It-Yourself Stories from Customers like You
Switch control water volume from small medium high was not function get stuck and not able to turn Ty L. • Gaithersburg , MD • August 10, 2014
After the part arrives, I was double check to make sure I got the right part. Importantly, unplug the electrical power first before do anything, also turn off the water hose for safety.
Then removed 4 screw out side panel and 2 screw in side to get lose.
After all, replaced a new part and put all panel and screw back together.
Finally, plug in electrical power then a water hose and test a new part just installed.
So far so good, seem like everything was function OK.
Again, thanks for your web...
Read more
More
$130.45
- Compare At:
-
$155.24
- You Save:
-
$24.79
Genuine Ge part
By: Ge
Part Number: WB24T10165
The Rocker Switch is an OEM part for GE ranges. This switch is used to control the surface heating elements, allowing users to turn them on or off and adjust the heat levels. It is designed to fit securely into the range's control panel, providing reliable operation and ease of use.
Causes of a bad switch rocker element can include regular wear and tear, electrical issues, or damage from spills or high temperatures. Over time, the internal contacts of the switch can degrade, leading to malfunction.
Symptoms of a bad switch rocker element include:
- The heating element not turning on or off
- Difficulty in adjusting the heat levels
- The switch feeling loose or unresponsive
- Flickering or intermittent operation of the heating element
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The burner size switch was bad Charles P. • Okeechobee , FL • October 16, 2015
Replaced the switch took a total of about five minutes. I pulled the stove out and turned the breaker off so I only had to pull it out enough to get a 1/4 " nut driver in behind it. Removed three screws and the back cover came off. I pushed the switch threw from the back and switched over the two wires then reversed the process. Completely easy if you can use a screw driver your crazy not to replace it yourself
Read more
More
$48.95
- Compare At:
-
$57.76
- You Save:
-
$8.81
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392027
Microwave won't start or runs only when door is pulled? Replace faulty door interlock switches. This 2-pack covers top and bottom switches. DIY repair.
Do-It-Yourself Stories from Customers like You
Kitchen aid architect ii microwave turntable stopped rotating Stephanie M. • Colorado Springs , CO • March 25, 2017
First, it was going to cost $95 for an appliance guy just to look at it! I figured there would be an upcharge on the parts + labor on top of the $95, so I took a chance & decided my husband & I could fix it cheaper; we were right, but it was a 3 week process (luckily, we have another microwave in the basement we were able to use in the meantime). I googled the microwave model #, then price checked the same item I thought we needed; printed off the diagrams of the various microwave "systems" &...
Read more
More
$89.71
- Compare At:
-
$106.75
- You Save:
-
$17.04
Genuine Speed Queen part
By: Speed Queen
Part Number: D513505
This 3-position fabric selector switch is the control behind the knob that lets you choose the fabric setting on your unit. Replacing a worn switch restores positive detents and ensures your selection is recognized instead of ignored or stuck.
- Provides three selectable fabric settings to tailor operation
- Routes the chosen setting to the timer/control
- Typical symptoms: no response when changing settings, intermittent selection, or being stuck on one mode
- Physical clues of failure: loose/no detent feel, broken shaft, or heat-discolored terminals
What's included: One 3-position fabric selector switch Installation notes:
- Disconnect power before servicing
- Access the control console; remove the knob and retaining hardware to free the old switch
- Photograph/label wire positions and transfer each lead to the same terminals on the new switch
- Reassemble and test all three positions for proper engagement
Do-It-Yourself Stories from Customers like You
Dryer not heating Sandy H. • Burkesville , KY • January 14, 2017
Replaced the fabric selector switch. Took abut fifteen minutes. Dryer works fine.
Read more
More
$35.95
- Compare At:
-
$42.42
- You Save:
-
$6.47
Genuine Frigidaire part
By: Frigidaire
Part Number: 316278700
Mounting screw for range oven door handles. Secures the handle to the door panel. Replace when stripped, corroded, missing, or if handle is loose.
Do-It-Yourself Stories from Customers like You
The door handle screw holes were hollowed out (the handle is plastic) making the door continuously fall off the plastic latches on the door trim were also broken off. Matthew F. • Columbia , MO • January 17, 2020
Replacing the trim takes a little bit of alignment and light force. The trim slides over the glass panel of the door, with the glass sliding into plastic tabs. We kept the door nearly vertical (almost closed), lined up the tabs on the trim with the glass door, and used mild force to slide the trim down onto the glass door. (Also, we found that the tabs on trim we ordered were much bigger than the tabs on our broken trim. This is probably due to slight variations in Frigidaire's design over...
Read more
More
$13.45
- Compare At:
-
$14.80
- You Save:
-
$1.35
Genuine Whirlpool part
By: Whirlpool
Part Number: W10821385
Includes brackets, screws, and fasteners for secure microwave installation. Replace missing, lost, or incomplete hardware from floor models or clearance units.
Do-It-Yourself Stories from Customers like You
Great service Ryan M. • Palmetto , FL • November 30, 2017
Best price & easy shopping experience. Products were shipped the same day and are exactly as ordered. Took my scratch & dent (70% off) to a perfect new unit.
Read more
More
$75.95
- Compare At:
-
$90.38
- You Save:
-
$14.43
Genuine Ge part
By: Ge
Part Number: WB23K34830
If your cooktop burner is stuck on high or won't adjust temperature, the infinite control switch likely failed. This part controls heat levels.
Do-It-Yourself Stories from Customers like You
We couldn't control the burner temperature. Steven A. • New Carlisle , OH • December 20, 2021
The parts are under the stovetop and the knobs are attached to them. We bought the correct ones from AppliancePartsPros, these were the correct ones. Seems we have an oddball stovetop. It's a GE drop in stove. The parts were easy to change. It was a simple matter of putting the wires on the new switch in the same place there were on the switch. I took phone pics of the wire locations before I took them off and only did one switch at a time. Turn the power off at the breaker panel first of...
Read more
More
$56.34
- Compare At:
-
$67.61
- You Save:
-
$11.27
Genuine Whirlpool part
By: Whirlpool
Part Number: W10847984
Dryer won't start or tumble? This belt switch monitors drive belt tension and cuts power if the belt breaks or slips. Moderate DIY repair with video.
Do-It-Yourself Stories from Customers like You
Loud noise and squealing from bottom of Cabrio dryer. Mark B. • Goodyear , AZ • November 24, 2018
Remove bottom panel, remove top panel, remove drum. Had to cut old squirrel cage off. Remove motor to remove old wheel shank. Remove belt switch, and replaced. Videos from AppliancePartPros helped a lot..
Read more
More
$27.37
- Compare At:
-
$32.57
- You Save:
-
$5.20
Genuine Ge part
By: Ge
Part Number: WB23K10003
Fixes burner stuck on high or no heat issues. This infinite switch regulates cooktop element temperature by cycling power on and off. Simple replacement.
Do-It-Yourself Stories from Customers like You
Surface element only worked on high Martin F. • Homedale , ID • July 16, 2019
I replaced the switch. I ordered the switch on Friday afternoon and received it Tuesday. And that was standard shipping.
Read more
More
$46.67
- Compare At:
-
$55.54
- You Save:
-
$8.87
Genuine Frigidaire part
By: Frigidaire
Part Number: 134813600
This door switch senses whether the appliance door is closed and signals the controls to run only when it's safe. Replacing a worn or intermittent switch restores dependable starts and proper shutoff when the door opens. What it does:
- Detects door position and allows operation only when the door is fully closed
- Interrupts operation when the door opens for safety
- Common symptoms include: won't start, stops when the door is moved, or "door open" message/error
- Intermittent starts due to worn actuator or internal switch contacts
What's included:
Install notes:
- Disconnect power before servicing
- Access the switch from the front or top panel; release mounting screws or tabs
- Move wires to the new switch one at a time to maintain correct positions, then secure the switch
- Test operation before reassembly
More
$53.78
- Compare At:
-
$64.00
- You Save:
-
$10.22