Timer Number131436800 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP68233-3
Fix freezer icing and warm fridge temps by replacing a faulty defrost timer. Typical DIY repair takes 15-30 minutes with basic tools and a multimeter.
Do-It-Yourself Stories from Customers like You
The refrigerator was operating in an unusual manner. The freezer would get abnormally cold even when set at the warmest temp on the dial. Then the refrigeration area was too warm. Greg T. • Boulder , MT • March 23, 2014
I took the bottom tray out of the freezer and found the coils iced up severely. I was reasonably sure the defrost timer was the problem and your tech said that was a good possibility. Ordered and replaced timer. (15 minutes) Problem fixed!!! Saved purchasing a new fridge at big bucks. We live over 40 miles from a service center so the cost of having a tech come out is astronomical. Thanks!!!
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00676960
Fix a dishwasher that won't complete cycles or runs indefinitely with this control board. Controls all wash cycles and functions. 30-minute repair.
This part fixes the following symptoms
-
Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You
Stuck in 01 and wouldn't pump out & finish and shut off Harvey D. • Madison , CT • September 02, 2017
I ORDERED A NEW CONTROLLER BOARD. THE DIRECTIONS SHOWED HOW TO UNCLIP THE OLD BOARD BUT THE FASTENERS WERE ON THE LEFT SIDE NOT THE BOTTOM AS INDICATED ON THE REPAIR INSTRUCTIONS. AFTER REASSEMBLY THE DISHWASHER FUNCTIONED AS NEW. THNKS FOR THE INSIGHT.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304509229
The Controller is an OEM replacement part for Frigidaire ovens. It acts as the brain of the oven, managing and regulating various functions such as temperature control, timer operations, and user interface.
Symptoms of a bad controller include:
- Oven not heating or maintaining proper temperature
- Display or control panel not functioning correctly
- Specific cooking modes or features not working as intended
- Error codes or warning lights indicating a controller issue
Causes of a bad controller can include electrical faults, power surges, or component failure due to age or excessive heat exposure. Faulty wiring connections or damage to the circuit board can also lead to controller malfunctions.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore oven models.
Do-It-Yourself Stories from Customers like You
Oven won't turn on Barbara N. • Scottsdale , AZ • August 24, 2019
I replaced the control board. Repair company wanted $395.00. I ordered the board for 140ish, 5 days later, 9 screws, 6 moduler plugs....working oven. The hardest part was pulling out the stove.
Read more
More
Genuine Lg part
By: Lg
Part Number: EAM60991301
This noise filter assembly is an electronic component that suppresses electromagnetic interference (EMI) generated by the washing machine's motor and control circuits. It helps prevent electrical noise from feeding back into your household wiring. Replace this part if your washer fails to start, shuts off unexpectedly, or causes interference with nearby electronics.
Do-It-Yourself Stories from Customers like You
No power to start dishwasher Joe M. • Knoxville , TN • April 17, 2020
Checked circuit breaker to d/w first. Good. Went to website to see no power issues. Most all of them mentioned the noise filter being the problem. Removed filter from machine and found the corner melted where fuse is located. Ordered new filter, installed, and now have power to switches. All the information I found on the website really made this a easy job to get done.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8182689
This is the central control unit (CCU) that manages all of the washer's functions, including cycle selection, water fill, drum speed, and drain operations. It is a circuit board typically mounted inside the machine's control housing. Replace this board if the washer displays error codes, fails to start, stops mid-cycle, or if buttons and cycle selections are unresponsive.
Do-It-Yourself Stories from Customers like You
F11 and eventually dl (door lock) error codes prevented proper operation of the kenmore he4t washer Daniel A. • Saint Johns , AZ • June 01, 2015
After unplugging the washer from the electrical outlet, the top of the washer was removed without a problem in order to allow easy access to the Central Control Unit (CCU) at the top of the back end of the washer. A cell phone was used to photograph the wiring layout and connectors plugged into the CCU, and then all connectors and the harness were carefully removed from the CCU without incident. Attempting to remove the old CCU, the plastic retaining clips built into the old CCU housing broke...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10243947
Fix cycles that won't advance or mixed-up wash settings with a new timer assembly. Moderately difficult repair taking 30-45 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Timer needed replaced (maytag centennial) Jeremy H. • Cleveland , TN • November 14, 2014
My experience could not have been smoother. I called the repair guy just to see how much money I saved and I was shocked! I saved $123.00, thanks to appliance parts pro. Thank you so very much for your professional help, great prices & super fast shipping! From now on, when another appliance needs repair I'm going to you guys first. I'm spreading the word to every single person I know and posting it on social media as well. Thanks again, Jeremy
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10491734
The Coin Slide Interface is an OEM part for Whirlpool commercial washers. It is a component that allows users to insert coins or tokens to activate the machine and initiate the laundry cycle.
Causes of a faulty coin slide interface can include regular wear and tear, damage due to misuse or vandalism, or electrical component failure. These factors can result in issues such as coin rejection, incorrect coin counting, or the inability to start the machine using coins.
Symptoms of a Bad Part:
- Will not start
- Not washing properly
- Timer will not set
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 279737
Dryer won't advance through cycles or keeps running after finishing? This timer controls cycle sequencing and shutoff. Typical DIY repair in 15 minutes.
Do-It-Yourself Stories from Customers like You
Timer not working on dryer. Michael S. • West Palm Beach , FL • February 08, 2020
Replaced timer. Took 15 minutes
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 316442119
Oven won't heat to set temperature or display shows error codes? This electronic control board manages bake/broil circuits and clock functions. DIY repair.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304516117
This is an electronic control board that mounts inside the range and manages oven functions such as temperature regulation, bake and broil cycles, and display operation. It receives input from the touchpad or control panel and sends signals to heating elements and other components. Replace this board if the oven fails to heat, displays error codes, has an unresponsive control panel, or behaves erratically during cooking cycles.
Do-It-Yourself Stories from Customers like You
Blown oven igniter went "poof!" with smoke at end of bake Peter M. • Salt Lake City , UT • March 04, 2022
So initial thought was bad bake igniter. I'bve replaced this before so I replaced it again and it wouldn't glow. Checked broil igniter and same thing, no glow. Checked voltage at molex connector for bake igniter and it went from 6.6v to 3.4v when triggered to glow -- well below the 120v expected.
Ordered new clock/controller and overlay -- it shipped the next business day!
Removed a handful of screws from the back panel to expose the clock/controller and removed/ replaced it with new...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10854215
Dishwasher won't heat, cycle, or start? A failed control board disrupts heating, wash cycles, and dispenser timing. Moderately challenging DIY repair.
Do-It-Yourself Stories from Customers like You
Replaced control board on dishwasher Southern Auto I. • Lafayette , LA • August 26, 2018
Looked at Utube video. Was not as easy as it seemed to be. But I got it
Read more
More
Genuine Ge part
By: Ge
Part Number: WB27X27460
Fix unresponsive buttons, broken timer, or non-working oven controls. This control board manages all cooking operations. DIY repair in about 1 hour.
Do-It-Yourself Stories from Customers like You
The kitchen timer button was broken. Robert F. • Waynesboro , VA • May 09, 2021
Ordered a new Oven Control unit and an Overlay (ours was punctured in a few places -- old and brittle). Opened the stovetop and removed some screws from the front control panel area. Followed the advice from Appliance Parts Pros' video to take a photo of the locations of all the connections on the old panel before removal -- that was an instrumental step to the success of this project! The whole job took just over an hour. Now the over controls and timers work like new -- because they are!...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 807022404
Fix a dishwasher that won't start, cycles not responding, or lights going out when door closes. This electronic control board restores cycle operation.
Do-It-Yourself Stories from Customers like You
Dishwasher acted like it was shorting out when I selected a cycle and shut door nothing would happen when door was open lights all worked fine shut again and nothing would happen and no lights Russell B. • Bossier City , LA • August 06, 2018
Bought the circuit board you recommended and it fixed it perfectly
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DC92-01626A
Dryer won't heat, won't shut off, or shows FE error? The main control board manages heating element relay and cycle timing. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Samsung dryer would not shut off only by opening door or removing power from the dryer unit Ross B. • Green Bay , WI • November 06, 2017
Replaced Main PCB Assy.
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DD82-01337B
The Dishwasher Electronic Control Board is essential for managing the various functions of your dishwasher efficiently. This genuine OEM part ensures reliable performance and seamless integration with your Samsung dishwasher. Designed to handle multiple cycles and settings, it helps maintain optimal cleaning results every time. The Electronic Control Board features durable components that contribute to the longevity of your appliance, reducing the need for frequent repairs. Its precise engineering allows for easy installation, making it a convenient solution for restoring your dishwasherGÇÖs functionality. Compatible with a range of Samsung dishwasher models, this genuine OEM part guarantees a perfect fit and dependable operation. By choosing the Dishwasher Electronic Control Board , you enhance your applianceGÇÖs reliability and ensure it continues to perform at its best, providing you with the quality and efficiency you expect from Samsung.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10804111
Fix a dishwasher that won't start, select cycles, or respond to buttons. This electronic control board restores full functionality. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Broken electronic control board. John B. • Schoharie , NY • October 23, 2020
My dishwasher just stopped working one day. I know my way around tools but wouldn’t call myself a “handyman“. When I opened up the front panel on the dishwasher I saw that the Control board was black and some of the wires had burnt through. I looked around YouTube and found some videos on how to replace the control board and wire harness, and then ordered the parts from appliance parts pros. All in all, it was an easy fix and took me a couple of hours to install the new control board and wire...
Read more
More