Water Temperature Sensor Parts
Genuine Lg part
By: Lg
Part Number: ABN73019101
Allows water to flow directly to your dispenser and ice maker without filtration. Install when choosing not to use a water filter. Confirm fit by model.
Do-It-Yourself Stories from Customers like You
No problem did not want filter for filtered water Rahul P. • Anaheim , CA • November 06, 2017
Replaced filter with plug.
Read more
More
$24.68
- Compare At:
-
$29.62
- You Save:
-
$4.94
Genuine Ge part
By: Ge
Part Number: WE04X25200
Dryer not heating or drying clothes properly? This cycling thermostat regulates temperature during the drying cycle. Moderate DIY repair for most models.
Do-It-Yourself Stories from Customers like You
Failing to dry clothes David K. • Mohnton , PA • September 19, 2022
Removed exterior panels, cleaned all venting, replaced outlet thermistor and thermostat. Pressure washed all removable parts. Reassembled. Now working as it should.
Read more
More
$18.95
- Compare At:
-
$22.55
- You Save:
-
$3.60
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4449751
This is a fixed high-limit thermostat used in ranges and ovens to monitor internal temperature and cut power to the heating element if the oven exceeds a safe operating temperature. It acts as a safety device to prevent overheating and potential fire hazards. Replace this thermostat if your oven is not heating at all, shuts off prematurely, or if you have confirmed a lack of continuity through the component with a multimeter.
Do-It-Yourself Stories from Customers like You
Whirlpool wall oven lost power while in self cleaning mode door locked and no display model #wos51ecoabo1 Tomas S. • American Canyon , CA • November 04, 2015
Replaced the thermst-fix and the thermal fuse oven now works great
Read more
More
$91.75
- Compare At:
-
$108.27
- You Save:
-
$16.52
Genuine Frigidaire part
By: Frigidaire
Part Number: 240396002
Secures the water filter and connects it to the supply line. Replace if your filter leaks, pops out, or won't stay seated. Verify fit with your model number.
This part fixes the following symptoms
-
Leaking
-
Not dispensing water
See more...
Do-It-Yourself Stories from Customers like You
Frigidaire puresource2 water filter kept popping out Larry G. • Tacoma , WA • October 18, 2014
Turned off water behind the fridge. Unscrewed housing that covered water lines behind the filter base with a 1/4" socket. Pulled out the water hoses by pulling forward on the blue ring holding the hose while pulling the hose backward. Unscrewed the two screws below the filter base. Used the 1/4" socket to remove four additional 1/4" nuts holding the front housing until it partially dropped. I kept the housing propped on a jar. Unscrewed two additional screws holding the filter release rod in...
Read more
More
$91.55
- Compare At:
-
$108.94
- You Save:
-
$17.39
Genuine Samsung part
By: Samsung
Part Number: DA97-17376B
Purifies drinking water and ice in your refrigerator. Replace every 6 months or when flow slows to maintain clean water. Confirm fit with your model.
Do-It-Yourself Stories from Customers like You
Needed a new water filter. Lynda C. • Gainesville , GA • September 21, 2021
Replaced filter.
Read more
More
$53.21
- Compare At:
-
$63.85
- You Save:
-
$10.64
Genuine Whirlpool part
By: Whirlpool
Part Number: W10685193
This elbow hose fitting connects water lines at an angle in your dishwasher's plumbing system. It provides a secure, leak-proof connection where hoses need to change direction. Replace this fitting if you notice water leaks around hose connections or if water pressure seems reduced during wash cycles.
Do-It-Yourself Stories from Customers like You
Purchasing an after market adaptor from lowe's from china that had been manufactured with bad threads Robert S. • St. Augustine , FL • April 12, 2016
Found the correct USA made OEM part from Appliance Pros, and installed it on my new Dishwasher. The use of this correctly manufactured Adapter prevented any damage to the threads of the dishwashers inlet solenoid valve which is made of a plastic material.
If I had forced the after market adapter onto the solenoid valve instead of ordering the OEM adapter; it would have ruined the threads on the plastic solenoid valve resulting in the need to purchase a very expensive replacement valve. ...
Read more
More
$19.31
- Compare At:
-
$22.98
- You Save:
-
$3.67
Genuine Whirlpool part
By: Whirlpool
Part Number: WP306604
Dryer won't heat or start? This thermal fuse cuts power when temperatures get too high. Test with a multimeter for continuity. Easy DIY repair.
This part fixes the following symptoms
-
Won't start
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Maytag gas dryer was not heating Christopher P. • Los Angeles , CA • October 04, 2014
Did some dryer repair research (dryer not heating) on the internet. Bought an ohm meter, opened up the dryer and tested the cut-off-T, high limit thermostat, dryer igniter, flame sensor, cycling thermostat for continuity. The igniter was bad, the other parts tested ok. Went online to AppliancePartsPros.com searched for a new igniter for my specific dryer model, found the right replacement igniter and watched the video on how to replace the igniter. Because my dryer is old (15+ years) and I...
Read more
More
$29.48
- Compare At:
-
$35.08
- You Save:
-
$5.60
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10545291
This thermal fuse is a safety device designed to cut power to the oven if internal temperatures exceed a safe limit, preventing overheating and potential fire hazards. It is a one-time-use component that cannot be reset once it has tripped. Replace this fuse if your wall oven will not heat at all or has no power, especially after a self-clean cycle or an overheating event.
Do-It-Yourself Stories from Customers like You
Open thermal fuse on whirlpool wall double oven Lon F. • Jacksonville , FL • May 23, 2015
Replaced fuse. It took much longer to get the oven out of the wall to access the fuse and replace the front panel than to do the repair. This fuse failed at the end of the cleaning cycle for the bottom oven and left the door locked because the open fuse removed the 120v power from the control board. The locked door made it impossible to remove one of the screws holding the wall oven in place. However, after I ground off the head of the screw behind the edge of the locked door I was able to...
Read more
More
$33.70
- Compare At:
-
$40.44
- You Save:
-
$6.74
Genuine Ge part
By: Ge
Part Number: WE04X20685
The Thermistor is an OEM replacement part for GE dryers. This temperature-sensing device monitors air exhaust temperatures and communicates real-time readings to the control board. Precise thermistor functioning ensures the heating elements and drum engage safely and appropriately.
Symptoms of a faulty thermistor include:
- Slow or inconsistent drying times
- Excessive heat inside the dryer chamber
- Overheating indicator lights illuminated
- Potential shut-offs due to high-limit temperature triggers
Causes often relate to moisture exposure from normal operation degrading electronic performance over time. Physical stress or impact could potentially damage thin connecting wires.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dryers.
Do-It-Yourself Stories from Customers like You
Gas dryer was not heating Charles M. • Huron , OH • September 01, 2016
Checked vent first to see if there was a blockage.
Removed top, front and drum of dryer.
Replaced all sensors including flame detection and gas valve coils.
Re-assembled and tested.
Dryer was now heating
Read more
More
$18.76
- Compare At:
-
$22.14
- You Save:
-
$3.38
Genuine Bosch part
By: Bosch
Part Number: 00263099
Replaces cracked or brittle dishwasher hose connecting the sump to the water inlet valve. Includes 2 o-rings. Essential for preventing leaks during pump replacement or routine maintenance.
Do-It-Yourself Stories from Customers like You
Low water pressure / arms not spinning Wilbur C. • Washington , DC • October 13, 2014
Used vids on youtube for steps on how to disassemble and install the pump; search "Bosch dishwasher circulation pump replacement". Also on AppliancePartsPro forums, a poster put up the Bosch "Dishwasher Service Training Manual" in .pdf. Search "Bosch dishwasher low pressure" on the forum. It's one of the post with the longest thread.
Six pointers.
1. In another forum post, the poster noted that some hoses were brittle with age - and cracked when reinstalling. I had same issue (my washer is...
Read more
More
$13.42
- Compare At:
-
$15.97
- You Save:
-
$2.55
Genuine Ge part
By: Ge
Part Number: WL49X20360
The Kit Sensor Speed is an OEM part for GE washing machines. It plays a crucial role in monitoring the drum's speed and movement, ensuring that the washer operates with optimal efficiency and precision. This sensor helps adjust the spin cycle based on the load, which is essential for proper balancing and to prevent excessive vibration and noise.
Symptoms of a failing Kit Sensor Speed include:
- The washer experiencing unbalanced loads frequently
- Excessive vibration during the spin cycle
- The washing machine making louder than normal noises
- Error codes related to the drum speed appearing on the display
Causes of a bad sensor can stem from electrical faults like wiring issues or component malfunctions, physical damage from overload or impacts, or simply wear and tear over time.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
More
$33.31
- Compare At:
-
$39.64
- You Save:
-
$6.33
Genuine Ge part
By: Ge
Part Number: WR01X29059
Water filter bypass plug allows your refrigerator to operate without a filter by creating direct water flow. Replace if damaged or worn. Confirm fit with your model.
Do-It-Yourself Stories from Customers like You
Needed bypass plug for refrigerator Randal F. • Tucson , AZ • March 28, 2020
Placed plug in position in refrigerator.
Read more
More
$46.95
- Compare At:
-
$55.40
- You Save:
-
$8.45
Genuine Ge part
By: Ge
Part Number: WR02X10668
The Temperature Sensor Seal is an OEM part for GE refrigerators. This seal is designed to protect the temperature sensor from moisture and other environmental factors that could affect its accuracy and longevity. By providing a barrier against the harsh conditions within a refrigerator, such as humidity and temperature fluctuations, this seal ensures that the sensor can accurately monitor and control the refrigerator's internal temperature.
Causes of a malfunctioning Temperature Sensor Seal can include wear and tear over time, degrading the seal's effectiveness. Physical damage like tears or punctures can allow moisture to reach the sensor. Improper installation may leave gaps or loose areas around the sensor, compromising the seal.
Symptoms of a bad Temperature Sensor Seal include:
- Inaccurate temperature readings.
- Condensation or frost near the sensor location.
- Frequent cycling or unusual patterns in the refrigerator's cooling process.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Fresh food side temp display says 37 degrees but inside ff side measures over 40 degrees. John N. • Southlake , TX • February 03, 2018
This fridge has had a problem of ice building up around evaporator coil in fresh food side. Wife (she HATES this thing) says it's done this from day one; 10 years. GE guy says all these models do this and there's no fix for it, so we have clean out the ice periodically... Like the 1940s pre auto defrost.
Now with the issue of FF side temp too highi assumed the ice had built up around FF evaporator coil preventing proper cooling, but AppliancePartsPros.com suggested the FF temp thermistor may...
Read more
More
$11.71
- Compare At:
-
$13.93
- You Save:
-
$2.22
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3398128
This cycling thermostat monitors the air temperature inside the dryer drum and signals the heating element to turn on and off to maintain the selected drying temperature. It is a small, disc-shaped component typically mounted on the blower housing or exhaust duct. Replace this thermostat if your dryer is not heating, overheating, running too cool, or shutting off before clothes are fully dry.
Do-It-Yourself Stories from Customers like You
Thermostat and thermofuse Britt A. • Concord , NC • February 16, 2015
Out with the old. In with the new. No problem. Dryers are simple and usually can be fixed quickly. appliance pros makes it easier with their tutorial videos and fast shipping!
Read more
More
$57.39
- Compare At:
-
$68.87
- You Save:
-
$11.48
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10121140
Encloses the water filter to ensure proper flow and filtration. Replace if cracked, leaking when filter is removed, or causing water hammer. Confirm fit.
Do-It-Yourself Stories from Customers like You
New filters would cause the water lines to "hammer" and/or no flow; valve internal to the housing was stuck open so water flowed onto the floor when the filter was removed Michael G. • Mcmurray , PA • August 30, 2021
The video was very helpful, but my KitchenAid model required slightly more steps. Only the two screws in front held the filter housing, same as the video shows, but it has to be removed from the rear. My model did not have the wire brace, only the two front screws held the housing. Shut the water off and pull the electrical plug. Remove the two screws holding the filter housing in the front. Remove the lower panel in the rear at the bottom of the refrigerator. Remove the two screws holding the...
Read more
More
$130.50
- Compare At:
-
$153.99
- You Save:
-
$23.49
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304525221
Fix a dishwasher that stops mid-cycle, overheats, or won't heat water. This thermostat regulates temperature during wash cycles. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
My dishwasher was getting overheated several plastic items got melted Pramod M. • Sugar Land , TX • April 04, 2016
So I replaced the hi-temp thermostat and the problem is fixed.
Read more
More
$26.24
- Compare At:
-
$30.96
- You Save:
-
$4.72