Waste Small Engine Start Switch Parts
Genuine Ge part
By: Ge
Part Number: WB24T10165
The Rocker Switch is an OEM part for GE ranges. This switch is used to control the surface heating elements, allowing users to turn them on or off and adjust the heat levels. It is designed to fit securely into the range's control panel, providing reliable operation and ease of use.
Causes of a bad switch rocker element can include regular wear and tear, electrical issues, or damage from spills or high temperatures. Over time, the internal contacts of the switch can degrade, leading to malfunction.
Symptoms of a bad switch rocker element include:
- The heating element not turning on or off
- Difficulty in adjusting the heat levels
- The switch feeling loose or unresponsive
- Flickering or intermittent operation of the heating element
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The burner size switch was bad Charles P. • Okeechobee , FL • October 16, 2015
Replaced the switch took a total of about five minutes. I pulled the stove out and turned the breaker off so I only had to pull it out enough to get a 1/4 " nut driver in behind it. Removed three screws and the back cover came off. I pushed the switch threw from the back and switched over the two wires then reversed the process. Completely easy if you can use a screw driver your crazy not to replace it yourself
Read more
More
$48.34
- Compare At:
-
$57.52
- You Save:
-
$9.18
Genuine Frigidaire part
By: Frigidaire
Part Number: 318601500
The Control Switch is an OEM part for Frigidaire ranges. This part regulates the heat output of the range's burners. By turning the control knob, users can adjust the temperature to their desired level, ensuring precise cooking results.
Causes of a bad control switch can include electrical malfunctions, wear and tear from frequent use, or damage due to overheating.
Symptoms of a bad Control Switch include:
- Inconsistent or fluctuating burner temperatures
- Burners not turning on or off properly
- Difficulty in adjusting the temperature settings
- The control knob feeling loose or unresponsive
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The top oven kept beeping on and off when trying to use it. Jerry C. • Keenes , IL • March 07, 2022
I replaced both the probe and temp control. The problem came in calibrating the new control, the instructions that came with control did not factor in a double oven, called back and talked to Michael at tech support and he found proper instructions, walked me through the process and sent me a PDF file with all information needed. I can't thank Michael and AppliancePartsPros.com enough for their service after the sale. I would definitely recommend and use it again.
Read more
More
$53.28
- Compare At:
-
$62.87
- You Save:
-
$9.59
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392027
Microwave won't start or runs only when door is pulled? Replace faulty door interlock switches. This 2-pack covers top and bottom switches. DIY repair.
Do-It-Yourself Stories from Customers like You
Kitchen aid architect ii microwave turntable stopped rotating Stephanie M. • Colorado Springs , CO • March 25, 2017
First, it was going to cost $95 for an appliance guy just to look at it! I figured there would be an upcharge on the parts + labor on top of the $95, so I took a chance & decided my husband & I could fix it cheaper; we were right, but it was a 3 week process (luckily, we have another microwave in the basement we were able to use in the meantime). I googled the microwave model #, then price checked the same item I thought we needed; printed off the diagrams of the various microwave "systems" &...
Read more
More
$89.71
- Compare At:
-
$106.75
- You Save:
-
$17.04
Genuine Speed Queen part
By: Speed Queen
Part Number: D513505
This 3-position fabric selector switch is the control behind the knob that lets you choose the fabric setting on your unit. Replacing a worn switch restores positive detents and ensures your selection is recognized instead of ignored or stuck.
- Provides three selectable fabric settings to tailor operation
- Routes the chosen setting to the timer/control
- Typical symptoms: no response when changing settings, intermittent selection, or being stuck on one mode
- Physical clues of failure: loose/no detent feel, broken shaft, or heat-discolored terminals
What's included: One 3-position fabric selector switch Installation notes:
- Disconnect power before servicing
- Access the control console; remove the knob and retaining hardware to free the old switch
- Photograph/label wire positions and transfer each lead to the same terminals on the new switch
- Reassemble and test all three positions for proper engagement
Do-It-Yourself Stories from Customers like You
Dryer not heating Sandy H. • Burkesville , KY • January 14, 2017
Replaced the fabric selector switch. Took abut fifteen minutes. Dryer works fine.
Read more
More
$35.95
- Compare At:
-
$42.42
- You Save:
-
$6.47
Genuine Whirlpool part
By: Whirlpool
Part Number: W10918003
Ice maker not harvesting or making ice? This rocker switch controls ice maker operation. Common fix when ice production stops despite good water flow.
More
$51.62
- Compare At:
-
$61.94
- You Save:
-
$10.32
Genuine Bosch part
By: Bosch
Part Number: 00189008
Burner won't spark or ignite? This spark switch signals the ignition module to light gas burners. Common DIY repair with basic tools, 15-30 minutes.
Do-It-Yourself Stories from Customers like You
Ignition spark would not work n one burner Shenton O. • Seattle , WA • September 28, 2017
Took out igniter module and porcelain was cracked. Replaced with ordered part and it worker fine!
Read more
More
$35.95
- Compare At:
-
$42.78
- You Save:
-
$6.83
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304508926
Burner won't turn off or element light stays on? This range burner control switch regulates temperature and power. Moderate DIY repair, 30-60 minutes.
Do-It-Yourself Stories from Customers like You
The control knob was orginal equipment but the switch installed by a sears tech was not and the knob eventually would not work the switch Kevin W. • Yucca Valley , CA • December 19, 2016
I went on your website found the parts needed to make the repairs. I watched the short video on installation. The parts arrived just a few days after I placed the order. I finished the repair in less than an hour and had to wait a few minutes to test the switch since the power was off and on due to a wind storm. Simple easy to do repair and I saved $90.00 on service fee for a tech to do the repair.
Read more
More
$64.70
- Compare At:
-
$77.64
- You Save:
-
$12.94
Genuine Ge part
By: Ge
Part Number: WB23K10003
Fixes burner stuck on high or no heat issues. This infinite switch regulates cooktop element temperature by cycling power on and off. Simple replacement.
Do-It-Yourself Stories from Customers like You
Control element went out Rita S. • Linton , IN • June 01, 2015
Just a simple install my maintenance man just put it in with no problems.
Read more
More
$48.68
- Compare At:
-
$57.93
- You Save:
-
$9.25
Genuine Frigidaire part
By: Frigidaire
Part Number: 316238202
The Dual Element Surface Switch is an OEM part for Frigidaire electric ranges and cooktops. It governs power distribution to the dual element.
Causes may be loose electrical terminals within the switch, defects from past power surges, or general wear over extended use.
Symptoms of a bad surface switch include:
- Inability to toggle one or both elements independently
- Elements activating intermittently or staying stuck on
- Overheating, sparks or strange sounds from faulty connections
- Repeated burning or singeing of cookware bottoms
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Both large burners were starting to go to higher heats at lower settings. James T. • Hilo , HI • April 23, 2023
I replaced both the large single element and the large dual element control switches. It appears the resistors were burning out. Problem seems to be fixed. Will know later when I do some simmering.
Read more
More
$85.95
- Compare At:
-
$102.28
- You Save:
-
$16.33
Genuine Samsung part
By: Samsung
Part Number: DA34-10003S
Compressor won't start or cycles on and off every few minutes? This overload relay protects against overheating. DIY repair in about 10 minutes.
Do-It-Yourself Stories from Customers like You
Samsung dual cooling neither frig or freezer was cold Philip H. • Hazleton , PA • October 12, 2014
The compressor was very hot and did not appear to be running. You could here a relay click on and off 15sec cycle. repeating every 2 minutes!
Bought a new overload relay too repair, plus a new thermal protection switch because it was cheap.
Both parts are actually located on the compressor behind a plastic cover. Found part numbers for parts by searching the compressor number on google! $25 Repair............
Read more
More
$31.15
- Compare At:
-
$34.27
- You Save:
-
$3.12
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001514
Washer won't start or fill with water? A faulty lid switch assembly with fuse is often the cause. DIY-friendly repair—most complete it in under an hour.
Do-It-Yourself Stories from Customers like You
Bad lid switch assembly Jim A. • Navarre , FL • March 15, 2014
Removed front and top panels of washer, removed old switch assembly. Then mounted and hooked up new switch assembly, put panels back on, turned on power and unit now works fine. Thanks for the quick delivery on the part...our total machine down time was only 36 hours. Biggest difficulty was getting the machine out of its position to work on it!
Read more
More
$132.95
- Compare At:
-
$158.21
- You Save:
-
$25.26
Genuine Samsung part
By: Samsung
Part Number: DC96-01703B
Fix a washer stuck mid-cycle or showing overfill errors with a new water level pressure switch. This part detects water levels to control fill cycles.
This part fixes the following symptoms
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
Samsung washer was getting stuck on 7 minutes and making lots of noise while spinning. Chris C. • Rocky Point , NY • September 01, 2017
Machine was a front load washer, after doing some research found that problem is usually caused by pressure sensor or the spider arm which attaches motor to tub.
Read more
More
$82.95
- Compare At:
-
$98.71
- You Save:
-
$15.76
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820051
Fix washer overfilling or won't fill issues with a new water level pressure switch. Prevents flooding and restores proper fill cycles. 10-minute DIY repair.
This part fixes the following symptoms
-
Will not stop filling with water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Washer overflowed and flooded the basement Tyler H. • Gardner , KS • February 27, 2016
Replaced the water-level switch and hose. Washer works again, no overflowing since!
Read more
More
$110.42
- Compare At:
-
$130.30
- You Save:
-
$19.88
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8054980
This lid switch is the washer's safety interlock. It detects when the lid is closed so the machine can agitate and spin, and cuts power when the lid is opened to stop operation and enhance user safety.
- Monitors lid position and allows agitation/spin only when the lid is closed
- Interrupts motor operation if the lid opens during a cycle
- Common failure symptoms: washer won't start or spin, fills but stalls, stops intermittently, or displays "lid open" alerts
- Restores proper cycle progression and safety shutoff when replaced
What's included: One lid switch Install notes:
- Disconnect power and water supply before servicing
- Access the switch from under the top panel/console per your model's procedure
- Release the old switch, move the harness to the new switch, and secure wiring away from moving parts
- Ensure the lid closes and actuates the switch before reassembly and test run
Do-It-Yourself Stories from Customers like You
Direct drive motor coupling failed wouldn't agitate or spin Tim H. • Fort Collins , CO • October 18, 2014
Was set to pull the trigger on a new washer since this one was 10+ years old. Broke a $25 lid switch fumbling to get the washer open before I found the appliancepros video library. Once I got things apart the right way I was able to diagnose the problem in 5 minutes. Identified the $10 part needed. Got the $10 coupling and the $25 switch and had the washer working like new in 20 minutes. I'm pretty proud of myself.. not going to tell anyone about the $25 switch.
Read more
More
$115.49
- Compare At:
-
$137.43
- You Save:
-
$21.94
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10149355
Fix burners stuck on high or not regulating temperature with this range infinite switch. Controls heating element power for precise cooking control.
Do-It-Yourself Stories from Customers like You
I had to change the burner switch Paul C. • Rochester , NY • November 09, 2014
Using the video on your site I was able to make the repair. It was a pretty straight forward repair. Thanks for having the diagram on your site for helping me find the right part.
Read more
More
$148.53
- Compare At:
-
$175.27
- You Save:
-
$26.74
Genuine Frigidaire part
By: Frigidaire
Part Number: 240505801
Fix a refrigerator light that won't turn on or off when the door opens or closes. This door-activated light switch is a simple 5-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Broken ice dispenser actuator, rusty front plate, bad fridge door switch Michael A. • Garnerville , NY • August 06, 2020
My problem started with a rusting condition in the ice bin that spiraled out of hand. I took apart the ice bin and all the hardware thinking I could clean it with the suggested baking powder. Plastic parts cleaned up like new, metal parts were pitted. I wire brushed and sanded the parts put it all back together and gave it a try. All appeared fine then two days later the ice dispenser stopped. I watched a couple of videos and most pointed to the ice auger motor. One video specifically said you...
Read more
More
$64.95
- Compare At:
-
$77.29
- You Save:
-
$12.34