Nut Damper Control Refrigator Parts

Took about 5 min to replace the handle with the parts ordered. Thank you for the fast service. Read more

It started with clicking sounds for about 10 seconds at random times throughout the day. eventually the clicking sounds were gone and the temperature in the fresh food section was dropping below freezing. Turns out that one of the 3 damper doors was stuck open. My fridge has a damper door in the top left and 2 doors in the bottom left. One of the bottom doors was dedicated to the quick chill drawer which hadn't worked in some time. but since the quick chill door was stuck closed it did not... Read more

Replaced the damper control after looking at the exploded drawings privided by this website and determing that the bad part was the damper control. I have never done a repair on an appliance before but this website made it seem doable. Read more

By buying a new control thermostat part. Read more

Replaced numerous items including this Inverter and two control boards but the Magnetron was the ultimate solution. The tip was clearly burned through when I removed the original. Read more

Removed the front off the back panel, unplugged the old unit. Then using a blow dryer heated the old timer to peel the face /cover off and applied to the new clock. Plugged in the replacement clock. Replaced the front of the range. The only complaint I have is we were not informed that a new face would not be included and the old one would have to be removed and applied to the replacement clock. The face that was on the orginal clock has the buttons to set the clock and timer reversed from... Read more

• Fridge too warm

I determined that this was the part to get based on a previous reviewer's post who had a similar problem. I bought the controller, it shipped quickly and I received it two business days later. I followed the instructions of the previous poster and had the device installed in about an hour. The most difficult part or should I say tedious part was unscrewing and then replacing the panel and screwing everything back in. The refrigerator keeps temperature now and turns on periodically as it should. Read more

• Timer will not advance

My dryer would only start (and keep running) after a lot of fiddling with the timer to find a position that "worked." The machine wouldn't turn on when the timer was set in the dry-sensor region, and eventually, it stayed running only when we pressed the timer button. As soon as the pressure was off, the dryer stopped. Clearly that wasn't sustainable. I'd been putting off the repair because our dryer vent situation is tricky; once disconnected it's a real bear to reconnect. Watching the... Read more

This issue was with a refrigerator that we acquired with a house we bought. The freezer was cold, making ice well, overall doing great. The refrigerator was not cold however. I had this issue with our own refrigerator in the past, and it was related to the defrost fan not working and the coils freezing up. However this refrigerator's coils had no ice buildup. Doing some searching on the internet I was able to narrow it down to the damper between the freezer and refrigerator not opening... Read more

Turned off the power. Pulled out the stove. Removed back of upper part of stove. Removed old control board. Took photos with phone to make sure I got wires back on correctly. Only 1 wire was difficult to remove and required gentle rocking with pliers. Put the overlay on the new board. Placed all the clips and wires back on the new board. Turned on power to test. Tested ok. Turned power off and resecured the board and back on the stove. Repositioned the stove. Turned power back on. I... Read more

Had an appliance repair co. come out to look @ problem.They were here very briefly & left saying they would give an estimate . #days later I had to call to get the estimate $480.00 . I wasn't happy about that. My wife said that the repairman just pulled out the stove & looked @ a sheet of paper that was behind the stove. I pulled out the stove & got the paper out & read the code problem, took a couple of measurements with a ohmmeter & with your help & reference ,ordered the correct PCB board &... Read more

Bought replacement relay board, replaced it. Would not work, turned stove circuit breaker off then on again. Display panel showed stove was resetting waited for reset, tested the bake option twice to ascertain it was working correctly. It worked! Our grateful appreciation to the customer service rep who helped us with our questions and the shipping. Wish we had gotten her name. Read more

I took the machine screws out of the outer panel for the right side only. Then pull the panel back a bit to release the lips from the front of the machine and had immediate access to the internal assembly that housed mounting nut. Order the new parts from AppliancePartsPro.com during the Thanksgiving week. Still received via FedEx in short time due to their same day shipping - which was greatly appreciated and surprising. Most small part places take a while to get the product out the door,... Read more

Replaced the thermostat. Read more

SELF. Read more