Hardware Hand Small Engine Start Switch Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 8203534
Fix a burner stuck on high or that won't heat properly with this cooktop infinite switch. Restores accurate temperature control. 30-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Failed dual element switch on whirlpool ceramic cooktop model #gjc3034gb0 Rodney S. • Kuttawa , KY • August 17, 2014
This cooktop has a dual element with an inner burner surrounded by an outer burner. The switch controls either the inner burner alone or both. The switch failed in that it would not operate the inner burner by itself, both burners would come on and only on high. On 8/14/2014 I replaced the failed dual element switch as follows:
• Turned power off to cooktop.
• Removed unit from cabinet.
• Removed metal edging and glass top.
• Removed screws holding switch panel access underside.
• Removed old...
Read more
More
$97.77
- Compare At:
-
$117.32
- You Save:
-
$19.55
Genuine Ge part
By: Ge
Part Number: WB24X10204
This microswitch senses the microwave door position and controls the safety interlock circuits. Replacing a worn switch restores proper start/stop behavior so the oven only runs when the door is fully closed.
- Detects door open/closed status to enable or disable cooking
- Part of the safety interlock system that stops operation if the door opens mid-cycle
- Replace if the switch fails a continuity check or shows heat or terminal damage
What's included: 1 microswitch
- Disconnect power before service; microwave capacitors can retain a dangerous charge
- Note wire positions and move them to the same terminals on the new switch
- Ensure the door latch cleanly actuates the switch; test operation before reassembly
Do-It-Yourself Stories from Customers like You
Stopped working tripped breaker Roberto M. • Pembroke Pines , FL • March 08, 2019
By replacing the switches.
Read more
More
$64.70
- Compare At:
-
$76.99
- You Save:
-
$12.29
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22002162
Washer won't spin or door won't lock? This door lock spin enable switch signals the control to start high-speed spin. Moderate DIY repair, 30-60 minutes.
Do-It-Yourself Stories from Customers like You
Washer would not spin in high speed at end of wash Joe Ray S. • Albuquerque , NM • January 19, 2015
Replaced the motor wax door lock switch and the door lock spin enable switch.
Read more
More
$40.41
- Compare At:
-
$48.09
- You Save:
-
$7.68
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74003122
Fix a burner stuck on high or won't adjust temperature with this infinite switch. Controls cooktop burner heat levels. DIY repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Element would stay on high even at lower settings why it would fail in the "high" mode is not a good design David M. • Suffield , CT • February 04, 2015
Replaced the Infinite Switch and that solved the problem. Did not need to replace the Surface Element
Read more
More
$61.56
- Compare At:
-
$73.26
- You Save:
-
$11.70
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304527841
The Rocker Switch is an OEM part for Frigidaire ranges and ovens. It is responsible for turning the interior oven light on and off. The light switch allows visibility of the oven cavity for viewing food during the cooking process.
Causes can include normal wear and tear over time, exposure to heat inside the oven cavity, or accidental damage.
Symptoms of a bad oven light rocker switch include:
- The oven light failing to illuminate when the door is opened
- The light remaining on even when the door is closed
- An inconsistent or flickering oven light
- The switch itself becoming loose, cracked, or non-responsive
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
1 of the 4 burners would not ignite with its own control Shane W. • Fullerton , CA • November 15, 2022
Removed & replaced igniter switch assembly. The hardest part was figuring out how to remove the range top...look up a YouTube video with your manufacturer and model number to see how to do it.
Read more
More
$15.50
- Compare At:
-
$18.45
- You Save:
-
$2.95
Genuine Lg part
By: Lg
Part Number: 6750C-0004R
The Compressor Overload Protector is an OEM replacement part for LG refrigerators. It plays an important safety role in protecting the compressor from damage due to excessive heat. Located near the compressor unit, the overload protector functions to shut off power to the compressor if temperatures become too high during operation.
Causes can include normal wear over time rendering it less responsive to temperature changes. Mineral or refrigerant deposits may also impede its ability to detect overheating conditions accurately.
Symptoms of a faulty overload protector include:
- Refrigerator fails to properly cool or the compressor does not run
- Circuit board or electrical component failure or burnout
- Lack of cold air production and higher than normal freezer/fridge temperatures
This OEM LG part is also compatible with some Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Not cooling Paul B. • Frederick , MD • January 15, 2017
8 y/o LG unit was not cooling or freezing. There was a clicking on the back side every 2-3 minutes. Used these 2 issues in a internet search and top 2 cited problems were dirty coils then bad PTC & OLP. Tool off the back panel, compressor was quie hot. Coils did not look excessively dirty but cleaned them anyway. DId not resolve the problem. The OLP & PTC recommended for my unit. were different than the original TSD and I thought I would have to return the parts. However, I got on a chat...
Read more
More
$48.95
- Compare At:
-
$58.25
- You Save:
-
$9.30
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
- Fastens panels, brackets, covers, or internal parts to the chassis or frame
- Helps maintain alignment and support, reducing rattle, vibration, or looseness
- Replaces missing or damaged screws that have backed out, broken, or stripped
- Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supplies before servicing
- Use the correct driver; start threads by hand to avoid cross-threading
- Match length and thread to the original location; do not substitute with longer hardware
- Tighten snugly; do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$21.46
- Compare At:
-
$25.54
- You Save:
-
$4.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10411937
Dryer won't start or run? A faulty belt switch often causes this when the belt snaps or slips. This switch monitors belt tension and is a fairly easy fix.
Do-It-Yourself Stories from Customers like You
Drum wouldnt turn power to control panel but wouldnt start Andy S. • Arlington , VA • November 03, 2016
Replaced motor "triple switch" Part Number: AP6021090 and the thermal fuse
Read more
More
$28.43
- Compare At:
-
$33.83
- You Save:
-
$5.40
Genuine Frigidaire part
By: Frigidaire
Part Number: 318191000
Burner won't heat, stuck on high, or works intermittently? This cooktop burner control switch restores reliable on/off control. Easy DIY repair.
Do-It-Yourself Stories from Customers like You
Switch was bad on cooktop Carl S. • Farmville , VA • October 28, 2016
Replaced the switch
Read more
More
$77.23
- Compare At:
-
$103.97
- You Save:
-
$26.74
Genuine Samsung part
By: Samsung
Part Number: DA34-00006C
The Refrigerator Door Switch ensures your Samsung refrigerator operates smoothly by accurately detecting when the door is opened or closed. This genuine OEM part is specifically designed for Samsung refrigerator models, providing a reliable and secure fit. With the door switch functioning correctly, your refrigerator maintains optimal cooling and energy efficiency, preventing issues such as improper temperature control or excessive energy usage. Installing this switch is straightforward, allowing you to quickly restore your applianceGÇÖs functionality without hassle. By choosing this genuine OEM part, you benefit from guaranteed quality and compatibility, ensuring your refrigerator continues to keep your food fresh and organized. Enhance your refrigeratorGÇÖs performance and extend its lifespan with the dependable Refrigerator Door Switch .
This part fixes the following symptoms
-
Ice maker not making ice
-
Not dispensing water
-
Light not working
See more...
Do-It-Yourself Stories from Customers like You
Samsung refrigerator rb2055sl door alarm beeping continuosly light out and temperature would jump from 34 degrees to 67 degrees Helen L. • Miami , FL • December 05, 2015
Ordered the Door Switch. Arrived the next day. It took less than 5 minutes to install the new switch. The beeping stopped immediately, light worked and temperature gauge showed 34 degrees.
Read more
More
$46.26
- Compare At:
-
$54.59
- You Save:
-
$8.33
Genuine Ge part
By: Ge
Part Number: WR09X10106
Refrigerator won't cool or compressor clicking? The overload and start relay protects and starts your compressor. DIY fix in 30-60 minutes.
Do-It-Yourself Stories from Customers like You
Compressor not running. James F. • Cudjoe Key , FL • April 02, 2014
I did some research. Found a comment on this website... shake the ptc component it was ratteling... there's a ceramic disc inside the ptc. if broken, this could be the source for the ratteling sound. Sure enough that was happening... one new ptc later an all is good. Ran fridge for 3 days now... no issues
It was gamble, took it.. and came out ahead. The capicitor looked as if was OK... it was not buldging... no obvious burnt marks anywhere.
Tricky part was getting the 'bale' wire reattached...
Read more
More
$37.95
- Compare At:
-
$44.78
- You Save:
-
$6.83
Genuine Frigidaire part
By: Frigidaire
Part Number: 5309918806
This door-activated light switch controls the interior lamp in your refrigerator. Replace a worn or sticking switch to restore dependable lighting and prevent the bulb from staying on and warming the compartment when the door is closed.
- Opens and closes the light circuit as the door is opened and closed
- Helps prevent the light from staying on with the door shut
- Common symptoms: interior light won't turn on, stays on with the door closed, or works intermittently
- Physical signs may include a stuck/broken plunger or damaged housing
What's included: One light switch Install notes:
- Disconnect power before servicing
- Gently pry the old switch from the liner/panel and release its locking tabs
- Transfer wires one at a time to the same terminals on the new switch
- Press the new switch fully into place; restore power, and test
Do-It-Yourself Stories from Customers like You
Light didnt turn on Robert R. • New Britain , CT • May 25, 2015
Well started with the bulb switch when that didn't work, i continue with the next switch which was the door switch, then it worked just make sure the light bulbs are good, because i went thru 4 bulbs
Read more
More
$31.95
- Compare At:
-
$38.02
- You Save:
-
$6.07
Genuine Samsung part
By: Samsung
Part Number: DE92-90508A
Secures microwave to mounting bracket. Replaces stripped, cross-threaded, or missing cage nuts. Installs inside cabinet housing for stable installation.
Do-It-Yourself Stories from Customers like You
Removed 1 year old microwave to paint kitchen internal thread assembly stripped Joel L. • North Richland Hills , TX • December 01, 2016
I took the machine screws out of the outer panel for the right side only. Then pull the panel back a bit to release the lips from the front of the machine and had immediate access to the internal assembly that housed mounting nut.
Order the new parts from AppliancePartsPro.com during the Thanksgiving week. Still received via FedEx in short time due to their same day shipping - which was greatly appreciated and surprising. Most small part places take a while to get the product out the door,...
Read more
More
$20.39
- Compare At:
-
$24.26
- You Save:
-
$3.87
Genuine Ge part
By: Ge
Part Number: WB1M1
ST10-16 X 7/16"
Do-It-Yourself Stories from Customers like You
Bottom heating element not working on a ge electric range David K. • Portsmouth , RI • December 21, 2014
Move stove to unplug, remove rear center panel, indentify the two spade connectors that feed the heating element and remove (unplug) them. Remove two screws that hold the element to the inside rear wall of the stove and remove element. Install new element, plug in the previously removed spade connectors, re-install rear center panel, plug range (power) in, move stove back into place and enjoy.
Read more
More
$7.65
- Compare At:
-
$9.10
- You Save:
-
$1.45
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001656
This is the washer's water level switch that senses tub level via air pressure and provides five selectable fill settings. Replacing a failed switch restores accurate filling and lets the cycle advance properly through wash, rinse, and spin.
- Monitors air pressure from the tub to detect actual water level
- Controls the inlet valves to start/stop filling at the selected setting
- Signals the timer/control to begin agitation and advance the cycle once full
- Common symptoms: overfilling or water keeps running, stops filling too soon or won't fill, inconsistent water levels, cycle won't advance due to incorrect level detection
What's included: 1 water level pressure switch with 5-position rotary selector Install notes:
- Disconnect power and turn off water supply before servicing
- Access the control console; remove the selector knob/dial and panel as needed
- Note wire locations (take a photo), move the harness, and transfer the pressure hose; ensure the hose is clear and firmly seated
- Securely mount the new switch, reassemble the console/knob, restore utilities, and test each fill level
Do-It-Yourself Stories from Customers like You
Water level in Maytag washer was always high and was not adjustable Von D. • San Bernardino , CA • December 21, 2017
Replaced the water level switch and water level pressure switch hose. Video on AppliancePartsPros.com detailed the procedure.
Read more
More
$127.65
- Compare At:
-
$151.90
- You Save:
-
$24.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10249845
This water level pressure switch senses tub water level and signals the control to stop filling and advance the cycle. Replacing a failed switch restores proper fill shut-off and allows the washer to move to wash, drain, and spin.
- Detects water level via air pressure in the attached hose from the tub air dome
- Signals the timer/control to close inlet valves at the selected fill level
- Enables agitation and spin only when the level is appropriate or the tub is empty
- Typical symptoms of a failed switch include overfilling or underfilling, continuous filling, cycle not advancing, or no spin
What's included: 1 water level pressure switch Install notes:
- Disconnect power and turn off water supply before servicing
- Access the switch in the control console or top panel; note wire locations for reassembly
- Transfer the pressure hose and wire connectors to the new switch one at a time; ensure the hose is clear, not kinked or cracked, and fits snugly
- After installation, run a quick fill test to ensure proper shut-off and cycle progression
Do-It-Yourself Stories from Customers like You
Intermitten f21 error Bill D. • Hornell , NY • March 11, 2015
After trouble shooting what f21 error was. I cleaned all hoses from the tube hose to all discharge hoses. I actually replace the washer discharge hose. I still got the same error. I had a few conversations with your service techs. They gave me great advice each time I called. At the end I had to replace the washer drain pump and pressure switch. we have gone 1 week without errors code so I consider the problem solved. I really like the replacement part videos. I also like the ease of...
Read more
More
$161.76
- Compare At:
-
$192.49
- You Save:
-
$30.73