Power Strike Small Engine Spark Plug Parts
Genuine Bosch part
By: Bosch
Part Number: 00165263
Plastic cover that protects the drain pump mechanism from debris. Replace if cracked, broken, or tabs are bent preventing proper seal during drain cycles.
Do-It-Yourself Stories from Customers like You
No spray during wash cycle pump impeller was broken. Robert K. • Cazenovia , NY • February 22, 2019
Watched AppliancePartsPros video, disassembled the dishwasher and replace impeller and seals.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131298300
Dryer won't heat or overheats? A failed cycling thermostat can't regulate temperature. This direct-fit part takes 15–30 minutes to replace.
Do-It-Yourself Stories from Customers like You
Rubbing blocks and felt that seal the front of the drum are worn drum is sagging and staining clothes with smears of rust Seth W. • Upper Arlington , OH • January 23, 2016
Replaced upper and lower felts. Painted rubbing surface on inside of drum with refrigerator enamel. Took out drum and lubed rear bearing. Replaced 2 of the 3 thermostats, and the belt just on principle.
Spent a lot of time with shop-vac removing lint from drier and exhaust ducts.
Runs great and is no longer cooking or staining clothes.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11685315
This Whirlpool Dishwasher Handle is an OEM part compatible with various Whirlpool dishwasher models. As a crucial component for the user interface of the dishwasher, this handle ensures effortless opening and closing of the appliance.
The deterioration of dishwasher handles typically stems from regular wear and tear. Frequent usage, accidental impacts, or environmental factors can contribute to the handle becoming loose, misaligned, or entirely broken.
Symptoms of a malfunctioning dishwasher handle include:
- Resistance or difficulty in opening or closing the dishwasher door.
- The handle feels loose or unstable.
- Visible cracks or damages on the handle.
- The door does not seal correctly, leading to potential leaks.
This genuine Whirlpool OEM replacement part is also compatible with Maytag, Jenn-Air, and some Kenmore models
Do-It-Yourself Stories from Customers like You
Needed new dishwasher handle. Chris T. • Chelsea , AL • September 06, 2020
Installed new handle
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP31001590
Fix a dryer that won't heat or overheats with a new thermistor. This temperature sensor ensures accurate heating cycles. DIY repair in 30 minutes.
Do-It-Yourself Stories from Customers like You
Dryer ran but wouldn't heat the only thing i could find was the thremistor only real at 8 ohms instead of a little over 10 Ross M. • Ohiopyle , PA • October 24, 2016
Installed a new thermistor tempiture control and it heats up as it should.
Tools used was a ohlm meter, 1" stiff puty knife, #2 Philips screw driver, neadle nose pliers,1/4 & 5/16 nut drivers.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10329510
Color: Black - For White order WPW10401479 and for Bisque order W10401480.
Do-It-Yourself Stories from Customers like You
The plastic handle and control panel mounts broke on Maytag dishwasher Cory C. • Potomac Falls , VA • February 20, 2017
I found the part numbers for both pieces on an appliance repair forum. Looked the parts up on AppliancePartsPros.com. Ordered the two parts. Fast processing. Fast shipping. The exact OEM replacement parts arrived and installed just like the original.
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00263088
Detergent door won't close or stay shut? Replace the dispenser assembly. Takes about 20 minutes with basic tools—remove inner door panel and swap out.
Do-It-Yourself Stories from Customers like You
Dispenser no longer opened Douglas L. • Fountain Hills , AZ • April 22, 2014
Removed back of dishwasher with hex screw driver 5 min
Unplugged power cord 30 secs
Loosened metal bracket on top and bottom with screwdriver 5 min
Pushed dispenser in and removed from dishwasher 5 min
Positioned new unit in space and snapped into place 1 min
Plugged electrics back in 1 min
Screwed back on 3 min
Roughly 20 min. I am nontechnical and rarely do repairs.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB14T10053
Oven door won't lock for self-clean or latch jams? This lock lever assembly restores secure door locking. Moderate DIY with stovetop removal required.
Do-It-Yourself Stories from Customers like You
The handle was bent so the latch kept locking the oven door regardless of handle position Matthew H. • Kirkland , WA • January 08, 2016
I replaced the latch and handle assembly. It's easy when you see how it goes together. Unscrew the two screws under the front edge of the stovetop, have a helper lift the stovetop up, unscrew the six screws holding the metal plate down and remove the plate, unplug the wires connected to the latch switch, and unscrew the two front screws holding the latch assembly in place. Replace the latch assembly and put it back together in reverse.
Read more
More
Genuine Ge part
By: Ge
Part Number: WE1M1002
This CCMR 30-amp, 120-volt fuse protects the appliance's electrical circuit by opening when current exceeds safe limits. Replace a blown fuse to restore power to the affected circuit and help prevent damage to internal components.
- Provides overcurrent protection for the circuit specified by the manufacturer
- If the fuse is open, the appliance may be dead, won't start, or certain functions won't operate
- Helps prevent wiring and component damage from shorts or overloads
- Repeated fuse failures indicate an underlying electrical issue requiring diagnosis
What's included: 1 CCMR fuse (30A, 120V) Install notes:
- Disconnect power to the appliance before servicing
- Locate the fuse in its holder/block and inspect associated wiring for heat or damage
- Test the old fuse for continuity; replace only with the identical rating specified
- Never bypass or upsize a fuse; correct the root cause of the failure before returning to service
Do-It-Yourself Stories from Customers like You
The dryer would not turn on Roland S. • Richmond , CA • August 02, 2014
First I check the breaker for the dryer then I check the power cord and the ohms to the power cord when all this things were in working order I then check the ohms to the fuse to the control panel.
The fuse had no ohms so I got a pair on needle nose pliers pulled out the fuse and replace it worked just find after that
Read more
More
Genuine Ge part
By: Ge
Part Number: WH01X37858
Washer won't start or lid won't latch? This lid lock striker engages the lock assembly to secure the lid during wash cycles. Simple DIY fix.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10178809
Fix a dryer that won't heat or overheats with this cycling thermostat. Regulates heating element temperature for consistent drying. Simple DIY repair.
Do-It-Yourself Stories from Customers like You
Worn or broken thermostat. Nicholas R. • Canyon Lake , TX • March 14, 2024
It’s a simple fix. Unplug the wires and remove the two screws and replace it with the new one.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10169881
Dryer not heating? A blown thermal cut-off is a common cause. This safety fuse opens if overheating occurs. Test with a multimeter for continuity.
Do-It-Yourself Stories from Customers like You
Dryer not heating (f31 error code Andrew D. • Kennewick , WA • April 17, 2015
Checked the heating element and found that it was shot so I bought a new one with out checking the thermostat and the cutoff-tml. I received the new element and it still wasn't heating so I had to wait another week for the cutoff-tml to be delivered. If your dryer isn't heating, make sure you check all parts of the heating system with a multimeter before you order new parts.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10883049
Oven door won't close or displays F5/E1 error? This door latch assembly secures the door and engages the safety interlock for proper operation.
Do-It-Yourself Stories from Customers like You
After self cleaning cycle our Kitchenaide oven quit working Charlie C. • San Luis Obispo , CA • April 23, 2018
Between YouTube, a multimeter and Appliance Parts Pro I was able to diagnose the problem and fix the oven without an expensive service call.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10616003
Soap dispenser door won't latch or detergent stays in compartment? This dishwasher dispenser assembly releases detergent at the right time. Moderate DIY.
This part fixes the following symptoms
-
Will not dispense detergent
See more...
Do-It-Yourself Stories from Customers like You
Soap dispenser door broke Janie C. • Raynham , MA • January 17, 2016
My husband Ron diagnosed the problem, that a new Soap dispenser assembly was needed. We ordered the part, and it arrived in 48 hours. The front dishwasher door was rusty, but my husband managed to dis-assemble and replace the dispenser. Pleased with purchase process. Part fit fine. Janie
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00615350
Fix a broken or cracked dishwasher handle cap. This end cap secures to the door handle. DIY-friendly repair takes about 20-30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Broken handle end cap on bosch diswasher Thomas R. • Oak Island , NC • July 20, 2015
One end cap was broken but I ordered 2 since the shipping was the same price. I replaced both by removing the Tork screws on both sides of the door panel (one side at a time). There was a bolt on the inside panel of the door that secured the end cap. I replaced the end cap and tightened the bolt moderately so as to not crack the plastic end cap. Total job was 30 mins replacing both end caps and including figuring out how to get to them.
NOTE - be careful to not open the door panel sections...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10864394
This is a small cap that covers and seals the rinse-aid reservoir on a dishwasher door. It keeps the rinse-aid liquid contained so it dispenses at the correct time during the wash cycle to prevent water spots on dishes. Replace this cap if it is cracked, warped, or no longer seals properly, which can cause rinse-aid to leak out prematurely or result in spotty dishes.
Do-It-Yourself Stories from Customers like You
My dishwasher needed a cap for the spotless dispenser Mark P. • Traverse City , MI • October 14, 2014
The part came by mail in a timely fashion and I seated the cap in the dispenser. It took all of 5 seconds. Thanks for your help in making sure I had the correct part APP.com.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11165163
The Electrode is an OEM replacement part for Whirlpool dryers. It is responsible for detecting the moisture levels in your laundry during the drying cycle, allowing the dryer to automatically adjust the drying time and temperature. It helps prevent over-drying or under-drying of your clothes, saving energy and protecting them from potential damage.
A bad electrode can occur due to wear and tear, damage, or a buildup of debris or lint. If you notice symptoms such as clothes taking longer to dry, the dryer shutting off prematurely, or inconsistent drying results, it may be time to replace the moisture sensor bar electrode.
Symptoms of a bad electrode include:
- Clothes taking longer to dry than usual
- The dryer shutting off prematurely
- Inconsistent drying results, with some items remaining damp
Repair your dryer by replacing the faulty or damaged electrode with this genuine OEM part.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
More