Run Vent Push Button Switch Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 134399700
The Start Switch is an OEM replacement part for Frigidaire dryers. This part initiates the dryer's cycle once the user selects the desired settings. By pressing the start switch, the motor activates, and the drying process begins, ensuring clothes are dried according to the selected specifications.
Symptoms of a bad Start Switch include:
- The dryer not starting when the switch is pressed
- Intermittent starting issues, where the dryer sometimes starts and sometimes doesn’t
- The need to hold the switch in place to keep the dryer running
- Unusual noises when the switch is pressed
Causes for a malfunctioning Start Switch can include electrical issues, such as faulty wiring or connections, wear and tear from frequent use, or internal failures within the switch mechanism that prevent it from signaling the motor to start.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryers.
Do-It-Yourself Stories from Customers like You
Start switch knob broke off. Jeff O. • Laurier , WA • March 07, 2018
I went online, ordered the part and installed it,,, took 15 minutes to install,,,saved huge $$$
easy peasy!! :-)
Read more
More
$77.66
- Compare At:
-
$92.42
- You Save:
-
$14.76
Genuine Samsung part
By: Samsung
Part Number: DA34-00011B
Fix a refrigerator that won't dispense water or ice with this dispenser switch. Requires removing the display cover and disconnecting housing connectors.
Do-It-Yourself Stories from Customers like You
There was no water dispensed and one led was burned out Ralph T. • Fishers , IN • August 15, 2016
I replaced the control board and the microswitch.
Read more
More
$30.76
- Compare At:
-
$36.30
- You Save:
-
$5.54
Genuine Ge part
By: Ge
Part Number: WE4X782
Fix a dryer that won't start or has a broken start knob. This rotary start switch is located in the control panel. Easy 5-10 minute DIY repair.
Do-It-Yourself Stories from Customers like You
Dryer knob broke 8 years ago post finally wore down so it could not be turned with pliers Patrick H. • Saint Albans , VT • December 29, 2014
Ordered parts arrived in two days. Ten minute fix with one wrench. Should have done it years ago.
Read more
More
$72.95
- Compare At:
-
$86.81
- You Save:
-
$13.86
Genuine Ge part
By: Ge
Part Number: WH41X10077
Guides water from the inlet valve into the wash tub. Replace if cracked, broken, leaking, or causing uneven water distribution in your top-load washer.
Do-It-Yourself Stories from Customers like You
Ge top load washer linking along the inside of the outside metal frame Robert L. • Guttenberg , NJ • November 07, 2014
Replaced the hose and water inlet. Part #:
AP3189243 (WH41X10077). This connects the solenoid valves to bring water into the tub.
Read more
More
$13.61
- Compare At:
-
$16.33
- You Save:
-
$2.72
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8273103
The Control Knob is an OEM replacement part for Whirlpool gas ranges. It is the manually operated rotary component that selects cooking features and temperature settings on the stovetop burners. Measures about 2 inches in diameter. For white order WP8273104. For biscuit order WP8273106.
Causes of a bad control knob include normal wear of internal components over extensive cooking cycles. Stripping or deterioration of the knurled gripping surface also reduces functionality.
Symptoms of a failed control knob involve:
- Difficulty in turning or fully engaging desired burners
- Loose, detached, or misaligned positioning on the control panel
- Inaccurate burner selection leading to scorched pans or undercooked meals
- Knob continuously self-adjusting from intended temperature settings
Compatible brands include KitchenAid, Jenn-Air, and some Kenmore gas ranges and cooktops as well.
Do-It-Yourself Stories from Customers like You
Sotve knobs were broken and cracked underneath not able to turn the stove on Terri M. • Burlington , NJ • July 17, 2014
We were able to order 4 new stove knobs from ApplicanceParts. The process was easy and fast. After getting the correct knobs (we ordered from another company...not so good), we were so elated. We will certainly order from this company again.
T. McCall
Read more
More
$21.46
- Compare At:
-
$25.54
- You Save:
-
$4.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9758060
Burner stuck on high heat or only working at maximum setting? This infinite control switch regulates burner temperature. DIY-friendly, 10-15 minute repair.
Do-It-Yourself Stories from Customers like You
One cooking element would only go on high Aaron H. • Sumas , WA • February 13, 2017
Replaced the switch in the back panel, SUPER easy!!
Read more
More
$65.74
- Compare At:
-
$78.23
- You Save:
-
$12.49
Genuine Ge part
By: Ge
Part Number: WR02X11174
Color: white. Measures about 3-1/2 inches wide by 1 inch high.
Do-It-Yourself Stories from Customers like You
Broken crisper drawer Tim M. • Altura , MN • February 08, 2016
Ordered new parts
Read more
More
$11.06
- Compare At:
-
$12.92
- You Save:
-
$1.86
Genuine Ge part
By: Ge
Part Number: WB03X10316
Replace your broken, cracked, or melted cooktop control knob. Installs on the control panel to adjust burner temperature settings. Chrome finish.
Do-It-Yourself Stories from Customers like You
The knobs were broken on my cooktop. Kimberly M. • Hot Springs , AR • March 14, 2022
We had searched everywhere for replacement knobs on my cooktop. We had even ordered some from other vendors, but they were wrong. I found AppliancePartsPros.com and they had them and were able to deliver them within 3 days of my order.
Read more
More
$47.95
- Compare At:
-
$57.06
- You Save:
-
$9.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74010205
Replacement control knob for range and cooktop burners. Installs on the control panel stem to adjust heat levels. Order when knobs are cracked, broken, or worn.
Do-It-Yourself Stories from Customers like You
Top burner control knobs were all damaged Paul P. • Spartanburg , SC • January 27, 2015
Purchased and replaced all five knobs. It looks and operates like new.
Read more
More
$27.37
- Compare At:
-
$32.57
- You Save:
-
$5.20
Genuine Frigidaire part
By: Frigidaire
Part Number: 134639920
Connects the outer tub to the drain pump in front-load washers. Replace if cracked, torn, leaking, or clogged to stop water damage and restore drainage.
Do-It-Yourself Stories from Customers like You
E21 water not pumping out fast enough (eiflw55hmb washer) Helmut D. • Rancho Palos Verdes , CA • April 20, 2020
Replaced pump. All components are accessible from the front of the machine. You have to remove two screws in the back that hold on the top cover, then slide the cover back. This will allow access to the screws that hold on the control panel. Remove the control panel (unplug cable), then remove the spring/wire that holds on the door bellows to the front panel (removing and installing that is the most difficult part of the job) and carefully remove the bellows from the front panel. Then remove...
Read more
More
$88.56
- Compare At:
-
$104.50
- You Save:
-
$15.94
Genuine Whirlpool part
By: Whirlpool
Part Number: W10337780
Washer overfilling or not filling correctly? This water level pressure switch kit fixes fill issues. Includes switch, tube, and clamp. Easy DIY repair.
This part fixes the following symptoms
-
Will not stop filling with water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Washer overfilling David C. • Pine Mtn. Club , CA • May 09, 2014
Reviewed troubleshooting tips and identified problem as "water level switch".
Watched repair video, which was very helpful.
Ordered part on a Sunday, which arrived the following Tuesday.
Repair was easy the fix was successful.
Read more
More
$62.46
- Compare At:
-
$74.33
- You Save:
-
$11.87
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3399639
Dryer not heating or stuck on one temperature? This temperature selector switch controls heat settings. Moderate DIY repair with video guide available.
Do-It-Yourself Stories from Customers like You
1 no heat on high or low settings and sometimes on medium heat setting 2 no auto cool down Robert H. • Renton , WA • March 11, 2015
I replaced the cycle switch, fixing the lack of heat. The timer switch replacement fixed the auto cool down. I watched a cycle switch replacement on Youtube, demonstrating removal of the top console, which answered the only question I had about the repair. The timer switch was a hundred bucks. The only thing to be said about that is that it was a lot cheaper than a repairman or replacing the dryer.
Read more
More
$59.48
- Compare At:
-
$70.19
- You Save:
-
$10.71
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293827
Burner won't turn on or heat properly? This range burner control switch restores heat level adjustment. Moderate DIY with wiring terminal labels.
Do-It-Yourself Stories from Customers like You
Large burners would go to high when turned on Charles H. • Prestonsburg , KY • October 25, 2016
Replaced infinite switch on large burners and just went ahead and replaced the infinite switch on the small burners while I had it apart and installed all new surface elements as well...parts were shipped the next day and I received them within 2 days...
Read more
More
$80.26
- Compare At:
-
$95.51
- You Save:
-
$15.25
Genuine Lg part
By: Lg
Part Number: 5214ER4001B
Directs water from inlet valve to detergent dispenser in LG washers. Replace if hose is cracked, leaking, won't stay attached, or damaged from wear.
Do-It-Yourself Stories from Customers like You
Little black specks in the dispenser tray calicum build up and rusted clamps on rear of dispenser Paul B. • San Diego , CA • January 30, 2017
I figured after 10.5 years that it might be time to replace the dispenser hoses because I was noticing black stuff in the dispenser trays. I replaced two or the four hoses and clamps on the far left side and for good measure the hot water inlet valve. The inlet valve was okay but the screen had all kinds of crap in there that I couldn't clean out so now I have an extra solenoid just in case one of the others fails. While I was at it I removed the dispenser and cleaned the calcium build up on...
Read more
More
$29.48
- Compare At:
-
$35.08
- You Save:
-
$5.60
Genuine Lg part
By: Lg
Part Number: 5214FR3188G
The Pump Hose is an OEM replacement part for LG washing machines. It is a flexible tube that connects the pump assembly to the internal tub and spins through the detergent dispenser area. The pump hose is responsible for circulating and removing water during the wash and rinse cycles.
Symptoms of a bad pump hose include:
- Leaks or water not fully draining from the washer
- Slow or inefficient filling and draining of water
- Pump running loudly or continuously
- Wet areas under or around the washer
Causes of failure can be cracks or splits developing in the tubing from repeated bending and flexing over time, or blockages restricting water flow.
It is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
Drain hose cracked Tommy W. • Pensacola , FL • August 18, 2015
REMOVED BACK PANEL, USED PLYERS TO REMOVE CLAMP, PULLED OLD HOSE OFF, REVERSED PROCEDURE TO INSTALL NEW HOSE. TOTAL TIME ABOUT 10 MINUTES.
Read more
More
$40.95
- Compare At:
-
$48.73
- You Save:
-
$7.78
Genuine Whirlpool part
By: Whirlpool
Part Number: W11239985
Black stainless steel control knob for gas range control panels. Replaces worn, cracked, or broken knobs with reduced grip from repeated use.
Do-It-Yourself Stories from Customers like You
Knob broke Meriwether M. • St Petersburg , FL • January 29, 2021
Bought a new knob.
Read more
More
$62.61
- Compare At:
-
$73.88
- You Save:
-
$11.27