Briggs Stratton Small Engine Start Switch Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304511344
The Switch is an OEM component specifically designed for Frigidaire washing machines. It controls various cycle options like water temperature levels, spin speeds, and additional settings like stain removal cycles.
Causes of a bad switch can include water or chemical damage leading to component failure over time, or loose wiring connections causing intermittent issues.
Symptoms of a bad switch include:
- Inability to select wash cycles or adjust settings
- Unresponsive or inaccurate temperature levels
- Lights/displays not functioning as normal
- Error codes indicating switch problems
This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. Replace yours today to avoid expensive repairs down the road.
More
$61.56
- Compare At:
-
$73.87
- You Save:
-
$12.31
Genuine Whirlpool part
By: Whirlpool
Part Number: W11417623
Fix a washer that won't fill with water or overfills with this water level pressure switch. Controls proper water amounts for each wash cycle.
Do-It-Yourself Stories from Customers like You
Water wouldn't fill the basket Mike R. • Essington , PA • December 03, 2016
Replaced the faulty switch with the new part. Found out tge problem by doing a simple Google search!
Read more
More
$52.68
- Compare At:
-
$63.22
- You Save:
-
$10.54
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304470340
Fix a humming compressor that won't start by replacing this capacitor. Restores proper startup and cooling. DIY-friendly repair under 30 minutes.
Do-It-Yourself Stories from Customers like You
The power was still on but the unit no longer cooled Kimberly B. • Santa Ana , CA • March 09, 2018
We replaced the starter and relay. Unit is working properly. We saved over $150 by replacing the parts in question.
Read more
More
$14.71
- Compare At:
-
$14.98
- You Save:
-
$0.27
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3399640
Dryer won't heat or overheats on low settings? A faulty temperature selector switch prevents proper heat control. Easy DIY fix in 10-15 minutes.
Do-It-Yourself Stories from Customers like You
Dead no power. Peter W. • Northfield , IL • January 29, 2024
APPs stellar videos got me started with confidence. Your parts diagram exactly match mine for my 28 year old Sears Kenmore Gas Model 110-97588210 (75882). Teacher at TMM Appliance convinced me to approach from the simpler, cheaper, easier to access parts inwards using the wiring diagram. I’ve designed products for Klein, Halo, and JUNO but am just an advanced electrical amateur. 3 parts totaling $110 and two hours and it runs and heats to spec. Even had time to vacuum out all over the lower...
Read more
More
$62.61
- Compare At:
-
$74.51
- You Save:
-
$11.90
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8286070
If your triple burner stays on high or won't adjust temperature, this infinite switch restores precise heat control for small, medium, and large rings.
Do-It-Yourself Stories from Customers like You
Lower front left burner would not shut off this burner is the single dual and triple element burner Maurice B. • San Diego , CA • May 07, 2015
Replace switch
Read more
More
$109.41
- Compare At:
-
$130.20
- You Save:
-
$20.79
Genuine Whirlpool part
By: Whirlpool
Part Number: 279872
This fixed-value resistor is an electrical component used in select dryers to limit current in a specific control circuit. It helps the timer or electronic control operate correctly by dropping voltage to safe, design-intended levels.
- Provides precise resistance to reduce voltage/current in the designated dryer circuit
- Supports proper operation of the timer, control board, or end-of-cycle signal (varies by model)
- Failure may present as a timer that won't advance, an inoperative signal/buzzer, or irregular cycle behavior
- Replace if visibly burned/damaged or if testing shows an open or shorted condition
What's included: One resistor Install notes:
- Disconnect power to the appliance before servicing
- Access the console/wiring harness and note original wire routing
- Make secure, insulated connections and route the resistor/leads exactly as original to avoid heat or chafing
- After installation, run a test cycle to ensure proper operation of the affected function
Do-It-Yourself Stories from Customers like You
Timer wouldn't advance on my dryer John L. • Oblong , IL • March 22, 2016
I ordered a new timer and installed it with the help of the videos provided and this did not solve my problem so I chated with the pros @ Appliance Parts Pros and told them my problem and they told me the problem and recommended the part I needed and With the incredibly fast shipping I had the part the next day. I installed it and now my dryer timer works great.Thanks to APPs for their help and ease of ordering and fast shipping. I highly recommend AppliancePartPros and will definitely use...
Read more
More
$46.35
- Compare At:
-
$55.62
- You Save:
-
$9.27
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304525097
Fix water or ice dispenser not working with this 4-button control switch assembly. Common fix when buttons fail to respond or dispense incorrectly.
Do-It-Yourself Stories from Customers like You
No water from dispenser. Steve N. • Malverne , NY • April 10, 2021
Replaced the four-button switch assembly.
Read more
More
$77.76
- Compare At:
-
$92.53
- You Save:
-
$14.77
Genuine Whirlpool part
By: Whirlpool
Part Number: W11206737
Fix a range hood control knob that stops responding or only works in one position. This rotary switch restores precise fan and light selection.
More
$19.95
- Compare At:
-
$23.74
- You Save:
-
$3.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 316445501
This control-panel switch restores reliable on/off control of a selected function on your range or wall oven. Replacing a worn or intermittent switch helps ensure the appliance responds consistently when you toggle that function.
- Directs power to the associated circuit when switched on or off
- Common symptoms: function won't turn on/off, intermittent operation, or the switch feels loose/sticks
- Helps restore positive, consistent control from the backguard/control panel
What's included: One switch Install notes:
- Disconnect power at the breaker before servicing
- Access the switch from the control panel/backguard; retain screws/clips
- Label/photograph wire positions and transfer leads one at a time to the new switch
- Ensure firm terminal connections, reassemble, restore power, and test operation
Do-It-Yourself Stories from Customers like You
Oven light would not go off Robert K. • New York , NY • November 30, 2019
I ordered a part to replace the oven door light switch. I got the oven apart easy enough, but when I was ready to install the part, I found the replacement part only had 2 tabs and not the 4 tabs the original one had. I called AppliancePartsPros.com and spoke to a customer service rep who was able to assist. He determined that the replacement part was defective and said he'd ship out another one. While I wasn't enthusiastic about having to assemble and reassemble the oven,...
Read more
More
$78.95
- Compare At:
-
$94.74
- You Save:
-
$15.79
Genuine Ge part
By: Ge
Part Number: WE4M411
Dryer won't heat or overheating? The temperature switch controls heat settings. DIY-friendly repair—just swap wires and reassemble. Takes 20 minutes.
Do-It-Yourself Stories from Customers like You
The timer was sticking to the point where the knobs were stripping out Peter A. • Dallas , OR • December 16, 2014
I unscrewed the 3 Phillips screws on the back of the dryer controls housing, then it folds forward for access to each control switch. the old one popped out, and I swapped the wires using a needle nose pliers, one by one, from the old switch to the new switch. The part was an exact fit, and popped right back into the housing. I screwed the 3 screws back in, pushed on the new knob, and it looks and works like new !
Read more
More
$64.70
- Compare At:
-
$76.99
- You Save:
-
$12.29
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10285512
Fix erratic or unresponsive cycle selections with this laundry center rotary encoder switch. Mounts behind the cycle knob to restore accurate settings.
Do-It-Yourself Stories from Customers like You
Temperature control switch failed to cold only. Marilyn M. • Summerfield , FL • September 30, 2017
Replaced with a new one.
Read more
More
$83.44
- Compare At:
-
$99.29
- You Save:
-
$15.85
Genuine Bosch part
By: Bosch
Part Number: 00629722
This is a spark ignition switch used on a range or cooktop that controls the electric spark to ignite the surface burners when the control knob is turned. It connects to the burner igniter circuit and signals when to fire the spark module. Replace this switch if your burners won't ignite, the spark clicks continuously even after the flame is lit, or the igniter fails to spark when the knob is engaged.
Do-It-Yourself Stories from Customers like You
My dryer started showing error codes. I had the repair company come to look at the oven, they told me that the oven was not repairable. Dominick M. • Tinton Falls , NJ • December 12, 2021
I ordered all the parts from AppliancePartsPros.com and in two days I had every new part that was. Ordered. After being told from the appliance repair company that I wouldn’t get parts for months. I received all parts within 4 days, 19 different parts!
Read more
More
$63.69
- Compare At:
-
$75.79
- You Save:
-
$12.10
Genuine Frigidaire part
By: Frigidaire
Part Number: 216594300
The Starter is an OEM replacement part for Frigidaire refrigerators. This component is crucial for initiating the compressor, which is responsible for cooling the refrigerator. The starter works by providing the necessary electrical power to get the compressor running, ensuring that the refrigerator maintains the correct temperature.
Causes of a bad starter can include electrical malfunctions, wear and tear over time, or damage from power surges. A faulty starter can prevent the compressor from starting, leading to cooling issues.
Symptoms of a bad Starter include:
- The refrigerator not cooling properly
- The compressor not running or frequently cycling on and off
- Unusual clicking or buzzing noises from the compressor area
- The refrigerator being warmer than usual or food spoiling quickly
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Overload protector done its job we had not defrosted the freezer for a long time causing the compressor to run more than it should it got overloaded found it defrosting Wanda L. • Belle Rose , LA • December 09, 2014
First checked the power then took off the compresser connections cover looked for burnt wires or loose or disconnected wires they were none of those I then removed the wires from the starter an overload protector removed them checked both for contunuaty overload protector no contunuaty then I checked the 3 poles on the comp. for contunuaty they were ok then I checked each pole to ground on the com. to final check that the comp. was still good
Read more
More
$48.95
- Compare At:
-
$58.25
- You Save:
-
$9.30
Genuine Bosch part
By: Bosch
Part Number: 00499500
This pressure chamber is part of the water level sensing system in the dishwasher. It connects to the tub and the water level sensor, using air pressure changes to detect how much water has filled the machine so it knows when to stop filling. Replace this component if the dishwasher overfills, underfills, or displays water level error codes during a wash cycle.
Do-It-Yourself Stories from Customers like You
Internal water leak on a bosch shu5316 uc/06 dishwasher David B. • Aspinwall , PA • March 13, 2015
Using instructions I obtained over the internet, I first removed the DW's bottom cover panels so I could look inside the DW (with a flashlight) while it was running. I had to put their dishwasher through several wash cycles before I could pinpoint the location of the leak. (The water appeared to be coming from above on the left side of the DW, near the top, rear of the DW's blue "Pressure Chamber." Thinking that the problem likely lay in either a malfunctioning Pressure Chamber or in a...
Read more
More
$60.55
- Compare At:
-
$72.05
- You Save:
-
$11.50
Genuine Frigidaire part
By: Frigidaire
Part Number: 903097-9040
Element won't heat or overheats? This infinite switch kit restores precise temperature control to your cooktop's burners. Fixes erratic heating issues.
More
$78.95
- Compare At:
-
$93.16
- You Save:
-
$14.21
Genuine Samsung part
By: Samsung
Part Number: DG44-01003A
This is a selector switch that controls a surface burner element on an electric range. It allows you to select different heating zones or power levels for a multi-ring burner. Replace this switch if the burner does not respond to the control knob, only heats on certain settings, or if the switch fails to cycle the element properly.
Do-It-Yourself Stories from Customers like You
Burner indicator light stays on always Joseph S. • Waldron , AR • August 02, 2015
Replaced DG44-01003A (AP4336838) Energy regulator. Fixed it with no problem.
It was the the big burner on my Samsung range that had three settings for pot size.
Read more
More
$197.95
- Compare At:
-
$237.54
- You Save:
-
$39.59