Power Small Engine On-Off Switch Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11445850
Fix interior lights that won't turn on or water dispenser issues with this refrigerator door switch. Easy DIY repair with video guide included.
Do-It-Yourself Stories from Customers like You
Socket and door switch for freezer not working. John M. • Westlake , LA • April 28, 2021
Replaced those two items listed above, please continue reading! I'm a mechanic by trade, so I have the basics. And what made this job easy? Appliance parts pros! very easy access to Part numbers and Diagrams, Online help, Customer service, and the list goes on. You will see several other sites, However! Wouldn't it be nice, knowing the above? Go no further! If you get stumped on anything during your Maintenance or Repair, They will Help.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10847984
Dryer won't start or tumble? This belt switch monitors drive belt tension and cuts power if the belt breaks or slips. Moderate DIY repair with video.
Do-It-Yourself Stories from Customers like You
Loud noise and squealing from bottom of Cabrio dryer. Mark B. • Goodyear , AZ • November 24, 2018
Remove bottom panel, remove top panel, remove drum. Had to cut old squirrel cage off. Remove motor to remove old wheel shank. Remove belt switch, and replaced. Videos from AppliancePartPros helped a lot..
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134813663
Dryer won't start or stops mid-cycle? This door switch detects when the door is closed, allowing your dryer to run. Simple DIY fix in 15-30 minutes.
More
Genuine Ge part
By: Ge
Part Number: WB23K34830
If your cooktop burner is stuck on high or won't adjust temperature, the infinite control switch likely failed. This part controls heat levels.
Do-It-Yourself Stories from Customers like You
We couldn't control the burner temperature. Steven A. • New Carlisle , OH • December 20, 2021
The parts are under the stovetop and the knobs are attached to them. We bought the correct ones from AppliancePartsPros, these were the correct ones. Seems we have an oddball stovetop. It's a GE drop in stove. The parts were easy to change. It was a simple matter of putting the wires on the new switch in the same place there were on the switch. I took phone pics of the wire locations before I took them off and only did one switch at a time. Turn the power off at the breaker panel first of...
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00422272
Dryer not heating or shutting off mid-cycle? A faulty temperature limiter is often the cause. Simple 15-minute fix—just remove back panel and replace.
Do-It-Yourself Stories from Customers like You
Dryer was not heating Kyle C. • Springhill , TN • December 06, 2016
I have a Bosch nexxt 500 series dryer that stopped heating. It was still running fine, just no heat. I did some research and found the Limiter as the possible problem. I pushed the red reset button. The dryer started heating up, but with in 1 cycle kicked off again. I called A.P.P. and spoke to Cecilia. She was very helpful. After a brief description of my situation she recommended just to replace the Limiter. I did so and that fixed the problem. Very simple replacement. It look longer to take...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392027
Microwave won't start or runs only when door is pulled? Replace faulty door interlock switches. This 2-pack covers top and bottom switches. DIY repair.
Do-It-Yourself Stories from Customers like You
Kitchen aid architect ii microwave turntable stopped rotating Stephanie M. • Colorado Springs , CO • March 25, 2017
First, it was going to cost $95 for an appliance guy just to look at it! I figured there would be an upcharge on the parts + labor on top of the $95, so I took a chance & decided my husband & I could fix it cheaper; we were right, but it was a 3 week process (luckily, we have another microwave in the basement we were able to use in the meantime). I googled the microwave model #, then price checked the same item I thought we needed; printed off the diagrams of the various microwave "systems" &...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10339334
Fix a washer that won't fill properly or overfills with this pressure switch. Controls water level sensing. DIY-friendly repair, about 5-10 minutes.
Do-It-Yourself Stories from Customers like You
Switch control water volume from small medium high was not function get stuck and not able to turn Ty L. • Gaithersburg , MD • August 10, 2014
After the part arrives, I was double check to make sure I got the right part. Importantly, unplug the electrical power first before do anything, also turn off the water hose for safety.
Then removed 4 screw out side panel and 2 screw in side to get lose.
After all, replaced a new part and put all panel and screw back together.
Finally, plug in electrical power then a water hose and test a new part just installed.
So far so good, seem like everything was function OK.
Again, thanks for your web...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3403607
Fix a dryer that won't heat or shuts off after 10-15 minutes with this thermal cutoff fuse. Common DIY repair for temperature detection issues.
Do-It-Yourself Stories from Customers like You
Dryer would run but wouldn't heat Todd B. • Dummerston , VT • August 14, 2016
I replaced the thermal cut-off sensors and the cutoff-Tml
Read more
More
Genuine Lg part
By: Lg
Part Number: 4930EL2003B
This is a mounting holder or grille that secures the moisture sensor bars inside the dryer drum area. The moisture sensor detects how wet the clothes are and signals the control board to end the cycle when they're dry. Replace this holder if it is cracked, broken, or missing, which can cause the sensor bars to be misaligned and lead to clothes coming out still damp or the dryer running too long.
Do-It-Yourself Stories from Customers like You
Sheets broke cover guide with filter and sensor Stefan H. • Ponte Vedra Beach , FL • March 15, 2019
I have order three parts, guide filter, cover guide, and sensor assembly. My previous cover guide was from two parts, when sensor assembly was one of them. New part ( guide cover ) was all in one piece so I just transfer old metal part of sensor to new cover guide and I don't need that sensor assembly anymore. I have ordered all three parts overnight by Fedex, ordered 15 min before 5pm, so next day it was here.
Dryer is fixed, I'm happy.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB24T10165
The Rocker Switch is an OEM part for GE ranges. This switch is used to control the surface heating elements, allowing users to turn them on or off and adjust the heat levels. It is designed to fit securely into the range's control panel, providing reliable operation and ease of use.
Causes of a bad switch rocker element can include regular wear and tear, electrical issues, or damage from spills or high temperatures. Over time, the internal contacts of the switch can degrade, leading to malfunction.
Symptoms of a bad switch rocker element include:
- The heating element not turning on or off
- Difficulty in adjusting the heat levels
- The switch feeling loose or unresponsive
- Flickering or intermittent operation of the heating element
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The burner size switch was bad Charles P. • Okeechobee , FL • October 16, 2015
Replaced the switch took a total of about five minutes. I pulled the stove out and turned the breaker off so I only had to pull it out enough to get a 1/4 " nut driver in behind it. Removed three screws and the back cover came off. I pushed the switch threw from the back and switched over the two wires then reversed the process. Completely easy if you can use a screw driver your crazy not to replace it yourself
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP53-1182
Dryer won't start or has no power? A blown thermal fuse is the likely cause. This safety device cuts power when overheating occurs. DIY fix.
Do-It-Yourself Stories from Customers like You
Our Maytag gas dryer was not producing heat— specifically it was cycling off after initially lighting Timothy E. • Bellvue , CO • September 15, 2019
When I pulled out the dryer from the wall, I could see dust/lint had accumulated everywhere and the vent system was compromised. I vacuumed up the dust/lint accumulation outside and then inside the vent system. I then opened the lower cabinet to clean and check its condition. I removed the water steamer bottle and its sub-assembly and then the drum. After cleaning and inspecting components — both visually and with a multi-meter I determined the problem was the appliance doing what it was...
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00189008
Burner won't spark or ignite? This spark switch signals the ignition module to light gas burners. Common DIY repair with basic tools, 15-30 minutes.
Do-It-Yourself Stories from Customers like You
Ignition spark would not work n one burner Shenton O. • Seattle , WA • September 28, 2017
Took out igniter module and porcelain was cracked. Replaced with ordered part and it worker fine!
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 318601500
The Control Switch is an OEM part for Frigidaire ranges. This part regulates the heat output of the range's burners. By turning the control knob, users can adjust the temperature to their desired level, ensuring precise cooking results.
Causes of a bad control switch can include electrical malfunctions, wear and tear from frequent use, or damage due to overheating.
Symptoms of a bad Control Switch include:
- Inconsistent or fluctuating burner temperatures
- Burners not turning on or off properly
- Difficulty in adjusting the temperature settings
- The control knob feeling loose or unresponsive
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The top oven kept beeping on and off when trying to use it. Jerry C. • Keenes , IL • March 07, 2022
I replaced both the probe and temp control. The problem came in calibrating the new control, the instructions that came with control did not factor in a double oven, called back and talked to Michael at tech support and he found proper instructions, walked me through the process and sent me a PDF file with all information needed. I can't thank Michael and AppliancePartsPros.com enough for their service after the sale. I would definitely recommend and use it again.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304508926
Burner won't turn off or element light stays on? This range burner control switch regulates temperature and power. Moderate DIY repair, 30-60 minutes.
Do-It-Yourself Stories from Customers like You
The control knob was orginal equipment but the switch installed by a sears tech was not and the knob eventually would not work the switch Kevin W. • Yucca Valley , CA • December 19, 2016
I went on your website found the parts needed to make the repairs. I watched the short video on installation. The parts arrived just a few days after I placed the order. I finished the repair in less than an hour and had to wait a few minutes to test the switch since the power was off and on due to a wind storm. Simple easy to do repair and I saved $90.00 on service fee for a tech to do the repair.
Read more
More
Genuine Speed Queen part
By: Speed Queen
Part Number: D513505
This 3-position fabric selector switch is the control behind the knob that lets you choose the fabric setting on your unit. Replacing a worn switch restores positive detents and ensures your selection is recognized instead of ignored or stuck.
- Provides three selectable fabric settings to tailor operation
- Routes the chosen setting to the timer/control
- Typical symptoms: no response when changing settings, intermittent selection, or being stuck on one mode
- Physical clues of failure: loose/no detent feel, broken shaft, or heat-discolored terminals
What's included: One 3-position fabric selector switch Installation notes:
- Disconnect power before servicing
- Access the control console; remove the knob and retaining hardware to free the old switch
- Photograph/label wire positions and transfer each lead to the same terminals on the new switch
- Reassemble and test all three positions for proper engagement
Do-It-Yourself Stories from Customers like You
Dryer not heating Sandy H. • Burkesville , KY • January 14, 2017
Replaced the fabric selector switch. Took abut fifteen minutes. Dryer works fine.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10918003
Ice maker not harvesting or making ice? This rocker switch controls ice maker operation. Common fix when ice production stops despite good water flow.
More