Run Vent Push Button Switch Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11643382
Replace your dryer's control knob if it's broken, cracked, or missing. This knob installs on the control panel to select drying cycles and settings.
Do-It-Yourself Stories from Customers like You
Broken timer knob Michael K. • Crivitz , WI • March 30, 2024
The knob broke off the plastic arm that came out of timer. Had to replace timer and knob. Very easy repair.
Read more
More
$27.37
- Compare At:
-
$32.30
- You Save:
-
$4.93
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3399639
Dryer not heating or stuck on one temperature? This temperature selector switch controls heat settings. Moderate DIY repair with video guide available.
Do-It-Yourself Stories from Customers like You
1 no heat on high or low settings and sometimes on medium heat setting 2 no auto cool down Robert H. • Renton , WA • March 11, 2015
I replaced the cycle switch, fixing the lack of heat. The timer switch replacement fixed the auto cool down. I watched a cycle switch replacement on Youtube, demonstrating removal of the top console, which answered the only question I had about the repair. The timer switch was a hundred bucks. The only thing to be said about that is that it was a lot cheaper than a repairman or replacing the dryer.
Read more
More
$59.48
- Compare At:
-
$71.38
- You Save:
-
$11.90
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10114608
The Drain Hose is an OEM replacement part for Whirlpool washing machines. It connects the washer tub to the drain pipe, facilitating the drainage of water after a wash cycle is complete.
Causes of a bad drain hose can include regular wear and tear, blockages from debris or lint, cracks or splits due to aging, or damage from improper installation or handling. A compromised drain hose can lead to water leaks and drainage issues.
Symptoms of a bad drain hose include:
- Incomplete water drainage after cycles
- Puddles or leaks near the base of the washer
- A blocked or restricted flow through the hose
- Detached or disconnected hose ends
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The drain hose cracked and sprung a leak Linda W. • Mt. Ulla , NC • May 25, 2014
This hose did not just attach to the back of the washer--that would have been too easy. This hose went into the back of the washer, under the tub & attached to the pump at the front of the washer. Both the back & front of the washer had to be removed to access the hose. Luckily the crack was at an external spot where it was easily seen; unluckily my husband was out of town at the time & I had to take the washer apart & put it back together. Actually it was not that hard. Before I took the...
Read more
More
$52.68
- Compare At:
-
$62.69
- You Save:
-
$10.01
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304505436
Fix E11 error code and washer not filling issues. This pressure sensor switch monitors water levels and signals the control board. DIY repair in under an hour.
Do-It-Yourself Stories from Customers like You
Washer would not let hot or cold water in diagnostic tests. Allowed both hot and cold water in had 120v on 5vdc fill sensor. Wayne K. • Stockbridge , MI • March 21, 2020
Replaced fill sensor and Main control board. Payed next day shipping and washer was up and running an hour after receiving the parts.
Read more
More
$59.48
- Compare At:
-
$70.78
- You Save:
-
$11.30
Genuine Samsung part
By: Samsung
Part Number: DA34-00011B
Fix a refrigerator that won't dispense water or ice with this dispenser switch. Requires removing the display cover and disconnecting housing connectors.
Do-It-Yourself Stories from Customers like You
There was no water dispensed and one led was burned out Ralph T. • Fishers , IN • August 15, 2016
I replaced the control board and the microswitch.
Read more
More
$30.76
- Compare At:
-
$36.91
- You Save:
-
$6.15
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10415587
This switch monitors water levels in the washing machine tub and signals when the correct amount has been reached. Located near the control panel or top of the washer, connected to a pressure tube. Replace when the washer overfills, underfills, or won't start filling with water.
Do-It-Yourself Stories from Customers like You
Whirlpool washer has a f35 code (analog pressure sensor) Paul M. • Carlisle , PA • June 13, 2014
I was searching the web for solutions and came across two folks who had similar trouble code. One fixed his by removing the pump strainer from the pump to find coins blocking water flow, thus the analog water pressure sensor provided a failure response. My issue was solved by following the other hints I got. I ordered a new sensor (switch). It was expensive for what it is, but the washer will not run correctly without it! The part arrived in a very timely manner, and it was the right part....
Read more
More
$229.61
- Compare At:
-
$275.53
- You Save:
-
$45.92
Genuine Ge part
By: Ge
Part Number: WB3X5699
The Clock Knob Kit is an OEM replacement part for GE ranges. It contains the necessary knobs to control clock and timer functions from the control panel. This 3 pack of range clock knobs is all you need to cover one timer control. Color: Black. Each knob measures about 1/2 an inch in diameter, and 1 inch deep
Symptoms of faulty knobs include:
- Knobs no longer stay securely attached to shafts
- Issues selecting timer options or adjusting clock settings
- Incorrect rotation feel or knobs difficult to turn
- Display issues arising from loose or faulty internal connections
This GE replacement kit is also compatible with Hotpoint, RCA and some Kenmore ranges for convenient cooking.
NOTE: For chrome order WB3X459.
Do-It-Yourself Stories from Customers like You
Discolored burner rings and missing oven timer/clock knobs on 30 year old ge electric stove Edward S. • Marietta , OH • December 05, 2015
Replaced above parts, easy to do, looks like a new stove. Needed to pry open knob stem slot segments very slightly to remove broken plastic from previous knobs. Spreading stem slot metal sides too much and they will break. With slots cleaned out, pinch stem sides almost together for new knobs to slide on. Customer service rep was helpful and parts delivery was next day as promised. Before contacting Appliance Parts Pros, I found their on-line customer reviews were much better than their...
Read more
More
$22.95
- Compare At:
-
$27.54
- You Save:
-
$4.59
Genuine Bosch part
By: Bosch
Part Number: 00600072
Replacement control panel button for dishwashers. Installs on the front control panel. Replace if cracked, broken, or missing from normal wear.
Do-It-Yourself Stories from Customers like You
The top plastic panel facia which houses the handle to open the door broke the panel is held on with two screws at the bottom which is a stress point and design flaw Randy E. • Hancock , ME • September 01, 2017
The parts from AppliancePartsPros.com arrived a day ahead of schedule. (I'm a big APP.com fan.) I removed the metal front door panel, then removed the broken plastic Panel-Facia which houses the handle. Because the buttons and handle trim needed to be transferred from the old Panel-Facia to the new one, I expected that, also being plastic, they may break when making the transfer, so I ordered all of those parts as well, which only drove the cost up about $32. If I broke one item in the...
Read more
More
$33.34
- Compare At:
-
$39.67
- You Save:
-
$6.33
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304504077
Fix i20 or i30 error codes with this dishwasher pressure sensor. Monitors water pressure to prevent overfilling. Common DIY repair for continuous filling.
Do-It-Yourself Stories from Customers like You
If yor fridgidaire dishwasher is showing an i30 error code do not assume there is a leak Kenneth T. • Vineland , NJ • April 24, 2017
I had to pull and clean the pressure sensor switch four times in a year. Each time more gunk accumulated. When that happens the sensor does not close the water valve. The dishawsher keeps filling and the water comes out through the overfill port. The water then goes in the catch basin under the washer and floats the emergency switch. This cuts off the water but keeps the pump running just in case. Tripping the circuit breaker is only a temp fix. What happens is the water level may have...
Read more
More
$85.95
- Compare At:
-
$101.42
- You Save:
-
$15.47
Genuine Whirlpool part
By: Whirlpool
Part Number: W11239985
Black stainless steel control knob for gas range control panels. Replaces worn, cracked, or broken knobs with reduced grip from repeated use.
Do-It-Yourself Stories from Customers like You
Knob broke Meriwether M. • St Petersburg , FL • January 29, 2021
Bought a new knob.
Read more
More
$62.61
- Compare At:
-
$75.13
- You Save:
-
$12.52
Genuine Ge part
By: Ge
Part Number: WB03X20563
Replacement control knob for your range cooktop. Installs on the control panel to adjust burner temperature settings. Order when original is cracked, broken, or finish has peeled off.
Do-It-Yourself Stories from Customers like You
Needed replacement burner knobs. Virgie Bright E. • New York , NY • July 02, 2021
ApplicancePartsPros are OUTSTANDING.
Every person I spoke with gave super helpful tips and information, AND -
Called me to double check on an order I didn't realize I had placed in error.
I couldn't believe it.
Thank you Thank you for all you do!!
Read more
More
$27.95
- Compare At:
-
$33.26
- You Save:
-
$5.31
Genuine Ge part
By: Ge
Part Number: WB24X10205
Microwave tripping breaker when door opens or at startup? A failed monitor switch with welded contacts is the likely cause. 30-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Stopped working tripped breaker Roberto M. • Pembroke Pines , FL • March 08, 2019
By replacing the switches.
Read more
More
$57.95
- Compare At:
-
$68.38
- You Save:
-
$10.43
Genuine Ge part
By: Ge
Part Number: WH12X10476
Fix washer overfilling or not filling properly. This pressure switch controls water level for proper washing. DIY-friendly, takes about 5-10 minutes.
Do-It-Yourself Stories from Customers like You
Washer was leaking water Jerry M. • Mansfield , TX • June 06, 2014
I thought initially it was a hose because it was leaking water from the bottom. On the small and medium load it didn't leak. I watched it on the large setting and noticed the water didn't shut off initially so therefore it was over filling. I ordered a switch pressure switch from Appliance Parts Pros and received it in two days. I replaced the switch, put the washer together and now it works like new. The wife is very happy to have her washer back working better than ever! Thanks!
Jerry
Read more
More
$48.95
- Compare At:
-
$58.25
- You Save:
-
$9.30
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001664
The Timer Knob Insert is an OEM replacement part for Whirlpool dryers. This is a cap located on the timer knob on the control panel. Color: White. This is the timer knob cap only. For the complete assembly, you must also order the knob and skirt.
Causes of timer knob Insert failure can include cracked plastic from years of repeated turning motions. Wear on components also occurs due to extensive lifetime usage cycles.
Symptoms of a faulty timer knob insert include:
- Knob becomes loose, detached or inoperable for timings scrolling
- Cracks appear exposing internal timer parts
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken knob James G. • Decatur , IL • November 16, 2014
It's working now
Read more
More
$9.63
- Compare At:
-
$11.46
- You Save:
-
$1.83
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10254672
Connects portable dishwasher hose to kitchen faucet. Replace if cracked, worn, or threads are stripped causing loose connection or leaks at sink.
This part fixes the following symptoms
-
Will not fill with water
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Needed a faucet adapter for portable dishwasher Lisa S. • Washington , MO • May 04, 2014
SCREWED IT ONTO FAUCET
Read more
More
$47.41
- Compare At:
-
$56.42
- You Save:
-
$9.01
Genuine Ge part
By: Ge
Part Number: WE14M119
Replaces a broken, cracked, or damaged lint trap duct assembly in your dryer. Directs airflow from the drum to the exhaust vent and houses the lint trap.
Do-It-Yourself Stories from Customers like You
GE front loader dryer making loud noise and clothes were getting caught and twisted inside! Victoria M. • Falmouth , ME • January 23, 2018
Our GE front loader dryer is approximately 10 years old. It started making a loud noise. Before we sank another $600 for a new dryer, I decided to go online to search Youtube videos to try to find out if anyone else had the same problem. I found that a lot of dryers had drum support bearings that wore out and needed to be replaced and a lot of dryers were also having clothes caught up in them.
I then found an Appliance Parts Pro video on how to fix this problem and found out what parts...
Read more
More
$199.95
- Compare At:
-
$235.94
- You Save:
-
$35.99