Small Engine Start Switch Parts
Bestselling
Price High to Low
Price Low to High
By: Whirlpool
Part Number: WPW10285512
Fix erratic or unresponsive cycle selections with this laundry center rotary encoder switch. Mounts behind the cycle knob to restore accurate settings.
Do-It-Yourself Stories from Customers like You
Temperature control switch failed to cold only. Marilyn M. • Summerfield , FL • September 30, 2017
Replaced with a new one.
Read more
More
$83.44
Compare At:
$100.13
You Save:
$16.69
By: Whirlpool
Part Number: 279872
This fixed-value resistor is an electrical component used in select dryers to limit current in a specific control circuit. It helps the timer or electronic control operate correctly by dropping voltage to safe, design-intended levels.
Provides precise resistance to reduce voltage/current in the designated dryer circuit Supports proper operation of the timer, control board, or end-of-cycle signal (varies by model) Failure may present as a timer that won't advance, an inoperative signal/buzzer, or irregular cycle behavior Replace if visibly burned/damaged or if testing shows an open or shorted condition What's included: One resistor Install notes:
Disconnect power to the appliance before servicing Access the console/wiring harness and note original wire routing Make secure, insulated connections and route the resistor/leads exactly as original to avoid heat or chafing After installation, run a test cycle to ensure proper operation of the affected function
Do-It-Yourself Stories from Customers like You
Timer wouldn't advance on my dryer John L. • Oblong , IL • March 22, 2016
I ordered a new timer and installed it with the help of the videos provided and this did not solve my problem so I chated with the pros @ Appliance Parts Pros and told them my problem and they told me the problem and recommended the part I needed and With the incredibly fast shipping I had the part the next day. I installed it and now my dryer timer works great.Thanks to APPs for their help and ease of ordering and fast shipping. I highly recommend AppliancePartPros and will definitely use...
Read more
More
$46.35
Compare At:
$55.16
You Save:
$8.81
By: Lg
Part Number: EBF60662911
This is a spark ignition switch assembly with wiring harness that controls the electric igniters on a gas range cooktop. It sends voltage to the spark modules when a burner knob is turned, initiating the clicking ignition sequence. Replace this part if your burners won't spark when turned on, spark continuously even when knobs are in the off position, or if only some burners ignite properly.
This part fixes the following symptoms
Doesn't shut off
Gas igniter glows, but will not light
See more...
Do-It-Yourself Stories from Customers like You
All the igniters spontaneously began to fire Michael S. • Adams , NY • October 12, 2019
Found a YouTube video online that provided instruction on how to change out the part.
Read more
More
$74.95
Compare At:
$89.94
You Save:
$14.99
By: Whirlpool
Part Number: WP3399640
Dryer won't heat or overheats on low settings? A faulty temperature selector switch prevents proper heat control. Easy DIY fix in 10-15 minutes.
Do-It-Yourself Stories from Customers like You
My kenmore dryer was not gnitind so therefore no heat also my washer was leaking under the machine Bill K. • Midland Park , NJ • November 24, 2014
THE WSHER WAS EASY BECAUSE THE DRAIN PUMP HAD TWO PENNIES INSIDE IT AND THEY CRACKED THE HOUSING.EASY FIX REPLACING THE DRAIN PUMP. WORKS LIKE A CHARM. DRYER WAS A BIT MORE WORK.I CHANGED THE IGNITER FIRST WITH YOUR ADVICE. STILL NOTHING. I THEN CHANGED THE COIL VALVE KIT. NO LUCK. NEXT WAS THE TEMP SWITCH ON THE PANEL. STILL NO GOOD.FINALLY THE THERMAL FUSE WAS RECOMMENDED. I WAS ABLE TO PURCHASE ONE LOCALLY AND IT WORKED . GREAT RELIEF.THANKS FOR ALL THE HELP AND RECOMMENDATIONS. YOUR...
Read more
More
$62.61
Compare At:
$75.13
You Save:
$12.52
Do you need help?
Get Questions Answered Instantly.
By: Frigidaire
Part Number: 216594300
The Starter is an OEM replacement part for Frigidaire refrigerators. This component is crucial for initiating the compressor, which is responsible for cooling the refrigerator. The starter works by providing the necessary electrical power to get the compressor running, ensuring that the refrigerator maintains the correct temperature.
Causes of a bad starter can include electrical malfunctions, wear and tear over time, or damage from power surges. A faulty starter can prevent the compressor from starting, leading to cooling issues.
Symptoms of a bad Starter include:
The refrigerator not cooling properly
The compressor not running or frequently cycling on and off
Unusual clicking or buzzing noises from the compressor area
The refrigerator being warmer than usual or food spoiling quickly
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Overload protector done its job we had not defrosted the freezer for a long time causing the compressor to run more than it should it got overloaded found it defrosting Wanda L. • Belle Rose , LA • December 09, 2014
First checked the power then took off the compresser connections cover looked for burnt wires or loose or disconnected wires they were none of those I then removed the wires from the starter an overload protector removed them checked both for contunuaty overload protector no contunuaty then I checked the 3 poles on the comp. for contunuaty they were ok then I checked each pole to ground on the com. to final check that the comp. was still good
Read more
More
$43.95
Compare At:
$52.74
You Save:
$8.79
By: Whirlpool
Part Number: WP74011489
Fixes burner that won't heat or indicator light stuck on. This infinite switch controls surface burner power and heat settings. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Knob twisted off Glenn M. • Aurora , OR • August 20, 2018
Replaced switch
Read more
More
$78.75
Compare At:
$93.71
You Save:
$14.96
By: Lg
Part Number: 6600W1K001Q
The Switch, Micro is an OEM part for LG microwaves. This micro switch is crucial for the operation of the microwave door mechanism, ensuring that the microwave only operates when the door is securely closed.
Causes of a bad micro switch can include wear and tear from frequent use, damage due to electrical faults, or physical impact that disrupts its functionality.
Symptoms of a bad micro switch include:
The microwave not starting or stopping unexpectedly
The door not latching properly
The microwave light not turning on or off correctly
Error messages appearing on the control panel
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Interior light and turntable failed at the same moment. Stacey B. • New Bern , NC • February 01, 2021
Knowing the odds of 2 failures occurring at the same exact time was unusually high, I just searched your site for what other broken items might affect these two failures. Came up with next control item upstream and tallied that item failure with percentages of successful repairs, (4 mins.) door safety switch.
Since I had to change out the most likely of the 3 and since I was already was going to be into the switch panel I ordered all 3 and swapped them all out to cover my butt, as they were...
Read more
More
$12.54
Compare At:
$14.92
You Save:
$2.38
By: Samsung
Part Number: DG44-01003A
This is a selector switch that controls a surface burner element on an electric range. It allows you to select different heating zones or power levels for a multi-ring burner. Replace this switch if the burner does not respond to the control knob, only heats on certain settings, or if the switch fails to cycle the element properly.
Do-It-Yourself Stories from Customers like You
Burner indicator light stays on always Joseph S. • Waldron , AR • August 02, 2015
Replaced DG44-01003A (AP4336838) Energy regulator. Fixed it with no problem.
It was the the big burner on my Samsung range that had three settings for pot size.
Read more
More
$197.95
Compare At:
$233.58
You Save:
$35.63
By: Frigidaire
Part Number: 316445501
This control-panel switch restores reliable on/off control of a selected function on your range or wall oven. Replacing a worn or intermittent switch helps ensure the appliance responds consistently when you toggle that function.
Directs power to the associated circuit when switched on or off Common symptoms: function won't turn on/off, intermittent operation, or the switch feels loose/sticks Helps restore positive, consistent control from the backguard/control panel What's included: One switch Install notes:
Disconnect power at the breaker before servicing Access the switch from the control panel/backguard; retain screws/clips Label/photograph wire positions and transfer leads one at a time to the new switch Ensure firm terminal connections, reassemble, restore power, and test operation
Do-It-Yourself Stories from Customers like You
Oven door switch replacement Vince W. • Melbourne , FL • January 13, 2017
Easy to replace, remove front control panel to get at all inside parts, the range is screwed together, look at the parts diagram to see how it was assembled, unplug old switch and install new one.Youtube has many DIY videos to review before you start.....
Read more
More
$78.95
Compare At:
$93.95
You Save:
$15.00
By: Frigidaire
Part Number: 5304525097
Fix water or ice dispenser not working with this 4-button control switch assembly. Common fix when buttons fail to respond or dispense incorrectly.
Do-It-Yourself Stories from Customers like You
No water from dispenser. Steve N. • Malverne , NY • April 10, 2021
Replaced the four-button switch assembly.
Read more
More
$77.76
Compare At:
$92.53
You Save:
$14.77
By: Whirlpool
Part Number: W11417623
Fix a washer that won't fill with water or overfills with this water level pressure switch. Controls proper water amounts for each wash cycle.
Do-It-Yourself Stories from Customers like You
Water wouldn't fill the basket Mike R. • Essington , PA • December 03, 2016
Replaced the faulty switch with the new part. Found out tge problem by doing a simple Google search!
Read more
More
$52.68
Compare At:
$62.69
You Save:
$10.01
By: Whirlpool
Part Number: WP3147265
Exhaust fan won't turn off or stuck on? This rocker switch restores reliable blower control. Simple 5-minute fix—just disconnect wires and snap in new.
Do-It-Yourself Stories from Customers like You
Broken exhaust fan rocker switch on jenn air Howard R. • Madison , WI • October 19, 2016
First check to see how many leads your switch has before ordering - I ordered before I took things apart, and got an incorrect 2 lead version when I needed a 3. On starting the repair, at first thought I might have to take apart console - but happily, no. After turning off power, just carefully pried the old switch out (putty knife to depress plastic clips above & below), pulled out gently (not much slack on wires) and removed the old wires by gently easing them off the broken switch with a...
Read more
More
$72.95
Compare At:
$86.08
You Save:
$13.13
Shop With Confidence
Over 15 million customers served!
By: Frigidaire
Part Number: 316445500
Oven light stays on or won't turn on when door opens? This door-activated switch restores automatic light control. Easy 15-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Oven door wouldn't lock & oven light stayed on Michael B. • Dubois , PA • November 26, 2015
Replaced light switch
Read more
More
$59.50
Compare At:
$70.21
You Save:
$10.71
By: Frigidaire
Part Number: 5304470340
Fix a humming compressor that won't start by replacing this capacitor. Restores proper startup and cooling. DIY-friendly repair under 30 minutes.
Do-It-Yourself Stories from Customers like You
The power was still on but the unit no longer cooled Kimberly B. • Santa Ana , CA • March 09, 2018
We replaced the starter and relay. Unit is working properly. We saved over $150 by replacing the parts in question.
Read more
More
$13.95
Compare At:
$16.60
You Save:
$2.65
By: Whirlpool
Part Number: W11087492
The Switch is an OEM replacement part for Whirlpool refrigerators. It is designed to control the water dispensing function of your refrigerator, providing a convenient and easy way to access filtered water. It is responsible for activating the water flow when pressed, allowing you to dispense water into your glass or container.
A bad refrigerator water dispenser switch can occur due to wear and tear, physical damage, or electrical malfunction. If you notice symptoms such as the switch not responding when pressed, inconsistent water flow, or a complete lack of water dispensing, it may be time to replace the switch.
Symptoms of a bad refrigerator water dispenser switch include:
Switch not responding when pressed
Inconsistent water flow
Lack of water dispensing
Restore your refrigerator's water dispenser by replacing the faulty or damaged water dispenser switch with this genuine OEM part.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
More
$28.43
Compare At:
$33.83
You Save:
$5.40
By: Whirlpool
Part Number: WP3191049
Fix a burner that won't heat or has no temperature control by replacing this 6-inch element switch. Restores smooth low-to-high heat adjustment in 30 minutes.
Do-It-Yourself Stories from Customers like You
2 of 4 burners lost variable heat finction James R. • Centreville , VA • August 04, 2015
Trial and error only cooktop unit. Everything mounted into the counter and needed to pull unit out. I figured it was a control switch or the burner itself. Based on costs, I took the less expensive route and replaced the 2 known malfunctioning switches. All on-line videos said it was a 2-3 hour process to replace. I finished mine in less than 30 minutes. Turned breaker back on and it works like a charm. 30 years old and still going strong.
Read more
More
$83.36
Compare At:
$100.03
You Save:
$16.67