Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Vent Rotary Switch Parts

Best Seller
Door Release Lever (Microwave)
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304509458

This door release lever connects the push-button to the latch assembly inside the microwave. Replacing a worn lever restores smooth, reliable door opening so the button works on the first press.

  • Transfers motion from the door-open button to the latch hooks to release the door
  • Helps resolve a door that won't open when the button is pressed
  • Addresses a button that feels loose, sticks, or lacks resistance
  • Replaces a cracked or broken lever causing intermittent door operation
What's included: 1 lever Install notes:
  • Unplug the microwave and discharge the high-voltage capacitor before servicing
  • Remove the grille and control panel to access the interlock/latch area
  • Note spring and pivot orientation and transfer any reusable hardware
  • Test door release action before completing reassembly

Do-It-Yourself Stories from Customers like You Microwave blew line fuse   Gerald G. • St. Louis , MO • August 05, 2019

It took a long time to determine the problem but eventually I discovered that the plastic bracket (latch hook) that held the three door-switches showed appreciable wear from repeated door openings and closings. This wear stopped the door from sealing properly and the door switch safety mechanism blew the line fuse. I replaced the worn bracket (AP6230612) as well as the plastic latch mechanism (AP4553585) on the door that engages this bracket (and of course the fuse too) and the microwave now... Read more

More
$7.67

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Cooktop Infinite Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293824

Fix a burner that won't turn off or requires repeated knob turning. This infinite switch controls surface element heat settings. DIY repair.

Do-It-Yourself Stories from Customers like You The stove element would not turn off.   Randall D. • Lake Charles , LA • November 06, 2017

The problem was fixed by ordering a switch. Read more

More
$76.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Hose Assembly,Connec
Genuine Lg part
By: Lg
Part Number: 5215EA3003A

The Hose Assembly & Connector is an OEM part for LG washing machines. This assembly includes the hose and connector, which are essential for supplying water to the washer during operation, ensuring a steady and reliable flow.

Causes of a bad hose assembly and connector can include wear and tear over time, cracks or splits due to pressure or temperature changes, and damage from improper installation or handling. 

Symptoms of a bad Hose Assembly & Connector include:

  • Water leaks from the hose or connector
  • Low water pressure or flow to the washer
  • Visible cracks or splits on the hose
  • Water not entering the washing machine properly

This OEM LG part is also compatible with some Kenmore models.

Do-It-Yourself Stories from Customers like You Kick clog error code   Darin D. • Odessa , WA • May 05, 2016

Checked all hoses for clogs cleaned them out and problem still existed so it was time for a new pump and since I was in there I replaced the drain hoses as well. Pump and hoses were exact oem replacement parts project took 30 minutes and the wife was happy again!!! Read more

More
$46.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Door Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3391902

Dryer won't start or keeps running with door open? A faulty door switch prevents proper start/stop control. Easy DIY fix in under 30 minutes restores safety.

Do-It-Yourself Stories from Customers like You Dryer wouldn't start   Victor C. • Johnson City , TX • July 27, 2019

Troubleshooting the problem on your web guides. Ordered part online. Repaired. Yea Read more

More
$52.68

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Range Infinite Switch Top Burner Control
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10149355

Fix burners stuck on high or not regulating temperature with this range infinite switch. Controls heating element power for precise cooking control.

Do-It-Yourself Stories from Customers like You I had to change the burner switch   Paul C. • Rochester , NY • November 09, 2014

Using the video on your site I was able to make the repair. It was a pretty straight forward repair. Thanks for having the diagram on your site for helping me find the right part. Read more

More
$148.53

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Range Infinite Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293830

If your range burner won't turn on or off properly, or the indicator light stays on when turned off, this infinite switch restores control. DIY repair.

Do-It-Yourself Stories from Customers like You Burner control bad, could not tell if it was on the number   Chalmer M. • Tipp City , OH • January 21, 2022

Remove front panel and replaced. Received parts fast. Read more

More
$81.60

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Range Infinite Switch
Genuine Ge part
By: Ge
Part Number: WB23K10002

Burner stuck on high or not heating? This infinite switch regulates cooktop burner power. Typical DIY repair takes about 30 minutes with basic tools.

Do-It-Yourself Stories from Customers like You The surface burner temperature erratic   Roy R. • Uniontown , PA • April 26, 2023

We replaced the Control Switch, Read more

More
$37.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Inlet Hose (Washer)
Genuine Lg part
By: Lg
Part Number: 5214ER4001J

This inlet hose routes incoming water from the washer's fill valve into the machine to support proper filling. Replace a cracked or leaking hose to stop drips, prevent water damage, and restore reliable fill performance.

  • Directs incoming water from the fill valve to the dispenser/tub during wash cycles
  • Maintains a sealed path to prevent internal or external leaks
  • Helps the washer reach proper fill levels and timing
  • Common symptoms of failure: water on the floor, leaks during fill, visible cracks or bulges, long/no fill or IE error
What's included: 1 inlet hose Install notes:
  • Unplug the washer and turn off both hot and cold water supplies
  • Keep towels or a pan handy; relieve residual water pressure before disconnecting
  • Note the original routing; fully seat the hose on fittings and secure with existing clamps
  • Restore water and power, then run a quick fill to check for leaks

Do-It-Yourself Stories from Customers like You Little black specks in the dispenser tray calicum build up and rusted clamps on rear of dispenser   Paul B. • San Diego , CA • January 30, 2017

I figured after 10.5 years that it might be time to replace the dispenser hoses because I was noticing black stuff in the dispenser trays. I replaced two or the four hoses and clamps on the far left side and for good measure the hot water inlet valve. The inlet valve was okay but the screen had all kinds of crap in there that I couldn't clean out so now I have an extra solenoid just in case one of the others fails. While I was at it I removed the dispenser and cleaned the calcium build up on... Read more

More
$26.72

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Water Fill Hoses
By: Pro
Part Number: TJ725RBFFP

Replacement water fill hoses for washing machines. Connect home water supply to washer. Replace when cracked, leaking, or showing rubber wear or corrosion.

Do-It-Yourself Stories from Customers like You Washer would not spin nor adgitate   Jeff A. • Stow , OH • June 28, 2015

Motor control board was flashing 4 times, indicating that the mode shifter had an error. I disconnected the mode shifter's wire from the controller and measured the resistance between the 2 leads with an ohmmeter. Since the reading was infinite, that meant that the mode shifter coil or in-line thermal sensor was electrically open, i.e. bad. As this fix is near a complete tear-down of the washing machine, here are a few tips I discovered. 1) the hub nut is difficult to remove and you need a... Read more

More
$13.71

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Lid Switch
Genuine Ge part
By: Ge
Part Number: WH12X10141

Fix a washer that won't agitate or spin with this lid switch. This safety part detects if the lid is closed. Easy DIY repair with basic tools.

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Washing machine would agitate but not spin   Kevin T. • Overland Park , KS • January 27, 2020

Replaced lid switch and capacitor Read more

More
$39.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Standpipe Drain Hose Adapter
Genuine Speed Queen part
By: Speed Queen
Part Number: 36878

Connects your washer's drain hose to household standpipe for a secure fit. Replace if cracked, loose, or missing to prevent hose movement during drainage.

More
$12.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Range Spark Ignition Switch And Wiring Harness Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 316580614

This assembly includes the spark ignition switches and wiring harness that control the igniter circuits on a gas range or cooktop. The switches detect burner position and signal the igniters to spark when a burner knob is turned. Replace this assembly if burners fail to ignite, click continuously without lighting, or if the spark module does not activate consistently.

Do-It-Yourself Stories from Customers like You The back left burner didn't light and didn't click when turned the knob   Oceanna C. • Watsonville , CA • April 07, 2016

My husband and myself didn't agree on which part was the exact problem. He felt it was the valve. I felt it was the ignitor/ orifice. And we both agreed the Harness-Ignitor needed to be replaced. So we ordered all 3, and I'm not sure if in fact all three were needed or not, but now with those parts replaced, the range is working like brand new!! Thanks to all the videos and diagrams on the website we were able to fix it ourselves easily. And the price was cheaper then other websites, also it... Read more

More
$83.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Push Button Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10330137

The Push Button Switch is an OEM part for Whirlpool washing machines. This part activates various functions and cycles on the control panel of the washer. The switch is designed to ensure responsive and reliable operation when selecting wash settings.

Causes of a bad push button switch can include wear and tear from frequent use, exposure to moisture, or physical damage from impacts.

Symptoms of a bad push button switch include:

  • Unresponsive buttons on the control panel
  • Inability to start or change wash cycles
  • Intermittent operation of washer functions
  • Error codes related to control panel issues

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer was humming when pushing start button   Chris K. • N. Wildwood , NJ • May 28, 2017

Removed front of dryer panel, removed top, and removed drum. Replaced motor and wheel, because the old wheel was rusted on the motor shaft, and could not be removed, so I had to break it off. Replaced motor, and reassembled. Everything works now. I also replace the switch-Pb, because the start button was getting stuck. Read more

More
$229.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Water Level Pressure Switch
Genuine Speed Queen part
By: Speed Queen
Part Number: 202937

If your washer overfills, underfills, or won't advance cycles, the water level pressure switch may have failed. Takes about 10-15 minutes to replace.

Do-It-Yourself Stories from Customers like You Broken pressure switch   Carole Y. • Yakima , WA • November 06, 2019

Bought part from you and got a repairman to put it in. Darlene of your staff found part I needed. Nice lady! Repairman charged $82 to do a 10 minute job. Not your fault! Read more

More
$123.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Cooktop Infinite Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: 8203534

Fix a burner stuck on high or that won't heat properly with this cooktop infinite switch. Restores accurate temperature control. 30-minute DIY repair.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You Failed dual element switch on whirlpool ceramic cooktop model #gjc3034gb0   Rodney S. • Kuttawa , KY • August 17, 2014

This cooktop has a dual element with an inner burner surrounded by an outer burner. The switch controls either the inner burner alone or both. The switch failed in that it would not operate the inner burner by itself, both burners would come on and only on high. On 8/14/2014 I replaced the failed dual element switch as follows: • Turned power off to cooktop. • Removed unit from cabinet. • Removed metal edging and glass top. • Removed screws holding switch panel access underside. • Removed old... Read more

More
$97.77

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dishwasher Pressure Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: A00055408

Fixes dishwasher leaking, error code i20, or pump that won't stop running. Monitors water pressure to control wash cycles. DIY-friendly repair.

Do-It-Yourself Stories from Customers like You Leaking dishwasher.   Richard W. • Louisville , KY • April 20, 2020

Replace the pressure switch. Read more

More
$66.95

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google