Hardware Hand Snowblower Friction Ring Parts
Genuine Ge part
By: Ge
Part Number: WC15X20161
Complete sink flange mounting kit for garbage disposals. Includes gaskets, seals, and hardware for secure installation. Replace if leaking or corroded.
Do-It-Yourself Stories from Customers like You
Leaking disposal Richard W. • Fernandina Beach , FL • January 09, 2016
We have a 3/4 HP GE disposal. It was installed when we built the house approximately ten years ago. It has been fantastic except for one thing. Every six months or so it would start leaking. I would tighten the Support Ring and off we would go for another six months. This time the Sink Flange began to "separate" (break apart at the top). I called my plumber but they said they only work on one brand (it was not GE) so my only option was to buy a new unit from them. That was unacceptable!! I...
Read more
More
$45.37
- Compare At:
-
$54.44
- You Save:
-
$9.07
Genuine Ge part
By: Ge
Part Number: WB01X34910
The Door Removal Tool is an OEM replacement part for GE microwave ovens. It is a specialized tool designed to assist in the safe and proper removal of the microwave door. This tool is essential for servicing, repairing, or replacing components within the microwave cavity, ensuring that the door can be securely detached and reattached without causing any damage.
Symptoms of needing the Door Removal Tool include:
- Requirement to access the interior components of the microwave for repairs or maintenance
- Difficulty in removing the microwave door using conventional methods
- Potential risk of damaging the door or other components without the proper tool
Causes for needing the Door Removal Tool can vary, but it is typically required when performing tasks such as replacing the magnetron, waveguide cover, or other internal parts that necessitate door removal for access.
This OEM replacement is also compatible with Hotpoint, RCA, and some Kenmore microwave models.
Do-It-Yourself Stories from Customers like You
The broken upper door for GE microwave/oven combo. Charles S. • Triangle , VA • October 03, 2021
The repair was fairly straightforward. I used the enclosed door removal tools to remove the old door. Then I slid the new door into place. The whole process probably took 1 minute.
Read more
More
$12.95
- Compare At:
-
$15.41
- You Save:
-
$2.46
Genuine Ge part
By: Ge
Part Number: WB01K10112
Secures the ignition electrode on gas range burners. Replace if burners won't spark, igniter clicks continuously, or clip is corroded or loose. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
Stove wouldn't spark Steven L. • Olympia , WA • December 17, 2014
Replaced spark module and all electrodes/igniters.
Read more
More
$12.95
- Compare At:
-
$15.41
- You Save:
-
$2.46
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304453707
This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.
- Fastens metal or plastic parts to the cabinet/frame
- Helps maintain alignment and reduce vibration or rattling
- Direct replacement for lost, damaged, or rusted hardware
- Keeps covers and brackets safely in place
What's included: 1 screw Install notes:
- Disconnect power before servicing; for gas appliances, also shut off gas supply
- Match one-for-one with the original screw; verify length/type before installation
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- Use the correct driver bit to prevent stripping the screw head
Do-It-Yourself Stories from Customers like You
Ice dispenser not working auger not turning Roger H. • Chesapeake , VA • August 21, 2016
Replace dispenser micro switch. Also replaced broken faceplate and rusty screws. Appliance parts Pro YouTube video was helpful in diagnosis and disassembly. Parts arrived quickly.
Read more
More
$23.61
- Compare At:
-
$27.86
- You Save:
-
$4.25
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
- Fastens panels, brackets, covers, or internal parts to the chassis or frame
- Helps maintain alignment and support, reducing rattle, vibration, or looseness
- Replaces missing or damaged screws that have backed out, broken, or stripped
- Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supplies before servicing
- Use the correct driver; start threads by hand to avoid cross-threading
- Match length and thread to the original location; do not substitute with longer hardware
- Tighten snugly; do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$21.46
- Compare At:
-
$25.54
- You Save:
-
$4.08
Genuine Whirlpool part
By: Whirlpool
Part Number: 8205948
This hardware kit contains the screws, bolts, and mounting components needed to install an over-the-range microwave to the wall and upper cabinet. It provides the necessary fasteners to securely anchor the microwave in place during installation. Use this kit if you are missing the original mounting hardware or if existing hardware is stripped, damaged, or incompatible during a replacement installation.
Do-It-Yourself Stories from Customers like You
We needed an assembly kit and turntable for wmh32517as 1 Jewell L. • Cincinnati , OH • March 01, 2015
We found the parts on this website. Thanks to your search bar, we could see if the parts would work on our model microwave.
Read more
More
$18.23
- Compare At:
-
$21.69
- You Save:
-
$3.46
Genuine Ge part
By: Ge
Part Number: WB02T10017
This is a genuine OEM replacement nut that is used on convection oven fans. This nut holds the fan onto the spindle. If the nut becomes lost during repairs to the fan, it will need to be replaced before the fan will work. This nut locks the fan to the spindle to turn and move the air around inside the oven. The fan helps the food to cook more evenly and reduces areas in the oven that are not cool enough or hot enough. If the fan is not working, the convection oven will not cook correctly.Convection ovens are different from regular ovens, and the fan is part of the reason. Convection ovens use the fan and an exhaust system to move the heat around inside the oven to cook food more evenly and faster. Many convection ovens have a setting that allows the oven to be used as a regular oven. If the nut is missing and the fan is inoperable, the oven can be used for regular cooking if it has this feature. Otherwise, the convection oven should not be used until the nut is replaced.This nut is a silver metal replacement part that is sold individually. It is designed for use in convection ovens made by GE and Kenmore.
Do-It-Yourself Stories from Customers like You
Convection fan screaming like the undead are coming Diego G. • Eden Prairie , MN • February 04, 2017
I took the cover off and the fan had separated from the bushing.
Ordered a new fan and nut and it took all of 5 minutes to replace.
Probably saved $159.99 service call repair and that is with a coupon.
Any one can do this repair, just make sure the oven is cold as you will come in contact with metal parts.
Read more
More
$8.95
- Compare At:
-
$10.56
- You Save:
-
$1.61
Genuine Ge part
By: Ge
Part Number: WB1M1
ST10-16 X 7/16"
Do-It-Yourself Stories from Customers like You
Bottom heating element not working on a ge electric range David K. • Portsmouth , RI • December 21, 2014
Move stove to unplug, remove rear center panel, indentify the two spade connectors that feed the heating element and remove (unplug) them. Remove two screws that hold the element to the inside rear wall of the stove and remove element. Install new element, plug in the previously removed spade connectors, re-install rear center panel, plug range (power) in, move stove back into place and enjoy.
Read more
More
$9.48
- Compare At:
-
$10.43
- You Save:
-
$0.95
Genuine Samsung part
By: Samsung
Part Number: DE92-90508A
Secures microwave to mounting bracket. Replaces stripped, cross-threaded, or missing cage nuts. Installs inside cabinet housing for stable installation.
Do-It-Yourself Stories from Customers like You
Removed 1 year old microwave to paint kitchen internal thread assembly stripped Joel L. • North Richland Hills , TX • December 01, 2016
I took the machine screws out of the outer panel for the right side only. Then pull the panel back a bit to release the lips from the front of the machine and had immediate access to the internal assembly that housed mounting nut.
Order the new parts from AppliancePartsPro.com during the Thanksgiving week. Still received via FedEx in short time due to their same day shipping - which was greatly appreciated and surprising. Most small part places take a while to get the product out the door,...
Read more
More
$20.39
- Compare At:
-
$24.26
- You Save:
-
$3.87
Genuine Frigidaire part
By: Frigidaire
Part Number: 134716700
Washer that fits between the support roller and shaft in your dryer. Replace if worn, cracked, or missing to maintain proper drum alignment and support.
More
$1.36
- Compare At:
-
$1.50
- You Save:
-
$0.14
Genuine Whirlpool part
By: Whirlpool
Part Number: W11684512
The Screw is an OEM replacement part for Whirlpool ranges. This screw is used to secure various components of the range, ensuring that parts such as panels, brackets, or burners remain firmly in place during operation. It is designed to withstand the high-heat environment of a range, providing long-lasting durability.
Symptoms of a bad or missing Screw include:
- Loose or misaligned range components
- Rattling or unusual noises during operation
- Difficulty maintaining the range's structural stability
Causes of a failing or missing screw can include normal wear over time, accidental loss during maintenance or repairs, or damage from overtightening. Replacing faulty screws ensures the appliance remains safe and functional.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken dryer baffles Ann B. • Bridgeport , NY • September 20, 2014
I am a 78year old woman and 40 years ago I replaced the belt on a dryer but could not even consider such a feat today. I ordered the parts from you on line and also found the video that you very nicely have attached to the site and I saved this under my favorites. The baffles arrived within 3 days and due to my age was unaware that dryers now come in two sizes and the ones I ordered were for the smaller but same model. I worked with a very nice customer service agent on line who got me the...
Read more
More
$13.95
- Compare At:
-
$15.68
- You Save:
-
$1.73
Genuine Frigidaire part
By: Frigidaire
Part Number: 316021109
Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.
Do-It-Yourself Stories from Customers like You
Everything went great! Tiffanie H. • Ortonville , MI • January 12, 2016
Husband installed the glass and trim it looks great!
Read more
More
$13.54
- Compare At:
-
$14.89
- You Save:
-
$1.35
Genuine Whirlpool part
By: Whirlpool
Part Number: 814103
This metal clip secures and stabilizes surface burner components on gas cooktops. It prevents burner parts from shifting during cooking and ensures proper alignment for safe gas flow. Install this clip if burner grates move during cooking, flames appear uneven, or burner parts seem loose or misaligned.
Do-It-Yourself Stories from Customers like You
Two fo the burner retaining clips had broken and one of the burners was malfunctioning Michael G. • Renton , WA • December 05, 2015
It went very easily. The two original clips were riveted in the top but a small drill bit cut the last of the rivit free and the clips remainders just fell out. There was no damage to the stop top. The butner simply snaps in to its socket so that was easy to replace. Pulled the old one out and put in the new one.
Read more
More
$9.63
- Compare At:
-
$11.36
- You Save:
-
$1.73
Genuine Ge part
By: Ge
Part Number: WB1K5157
Hex washer head screw secures oven panels, brackets, and door handles. Replace missing, stripped, or damaged screws to eliminate looseness and rattling.
Do-It-Yourself Stories from Customers like You
Door handles were missing Dianne T. • Tacoma , WA • December 03, 2017
It was very easy!. Just removed the screws off the trim plate and access was right there. The double oven was given to me but the handles were missing and the end caps so I just had to replace them.
Read more
More
$9.88
- Compare At:
-
$10.87
- You Save:
-
$0.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 316001009
Secures the oven door handle to the door or front panel. Replace if your screw is stripped, missing, or damaged to restore a firm grip and proper alignment.
Do-It-Yourself Stories from Customers like You
Renter broke the handle off the oven Brian W. • Brunswick , GA • November 16, 2014
Who does that? I've lived in my house for many years and never have done the damage that a renter can do in just 1 year. Looked up the Serial number and found the parts I needed easily. Ordered them and they arrived in about 3 days. Fit perfectly.
Read more
More
$13.24
- Compare At:
-
$14.56
- You Save:
-
$1.32
Genuine Ge part
By: Ge
Part Number: WB1X1130
Replacement screw for securing panels, brackets, and internal components. Needed when original hardware is stripped, missing, or damaged during repairs.
Do-It-Yourself Stories from Customers like You
Broken door hinge on a ge wall mount double oven Cheryl A. • Mckinney , TX • June 18, 2018
We replaced the broken door hinge.
Read more
More