Power Strike Small Engine Ignition Coil Parts
Genuine Ge part
By: Ge
Part Number: WB44T10011
Oven not heating or baking unevenly? A faulty bake element is usually the cause. This bottom heating element is a straightforward DIY fix in 10-15 minutes.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Oven bake element malfunction Fred H. • Dacula , GA • March 19, 2014
Watched AppliancePartsPros.com instruction video.
Ordered new oven bake element, which arrived a couple days later.
Removed old oven bake elelment.
Installed new oven bake element.
I am very appreciative of the instructional video. It's a very handy way for me to figure out if it's a do-it-yourself repair or not. In this case, another key thing it pointed out was the fact that the two wires that attach to the oven bake element have a tendency to slip back into the insulation behind the...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11307244
Washer won't start or stops mid-cycle? A faulty lid lock assembly prevents operation. Moderately difficult DIY repair—installation video available.
Do-It-Yourself Stories from Customers like You
The washer would not go into spin mode only partial wash and drain Karen T. • Dearborn Heights , MI • August 11, 2017
The part is so new no video so I went onto a similar part and watched video that got me about 80%. Then, called and customer service sent me a service Manual but this still was not specific so I broke the old to get it out and in the process figured out how to do it correctly. So I installed the last bit of it which was the bezel through the machine top by myself correctly. So you take the old one out by pushing out to the right from the bottom side using a screw driver for leverage. It will...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB44T10010
Oven not heating or baking unevenly? A faulty bake element is often the cause. This heating element restores proper baking temperature. DIY-friendly.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
The radiant elements had been dead for years the bake element failed spectacularly on Thanksgiving Christine W. • Golden Valley , MN • December 04, 2020
It took a few of us. One to vacuum up the fire extinguisher residue. One to trip the breaker. One to provide light. One to clean out under the stove while it was pulled out. I disconnected the bake element. I needed help to disconnect one of them because it was very tight. I put the element into the oven and reconnected the right side, very easy. The left side fell back into the slot. Curses ensued. I removed the back plate and it was very easy to thread the left wire back into the oven and...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10308477
Oven won't heat or bakes unevenly? The bake element likely failed. Located at oven bottom, this part restores proper baking heat. 10-minute DIY fix.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
My electric oven would not fully heat up Richard Z. • Avon , MN • December 20, 2014
The first thing I did was call appliance pros. The tec told me it was a good chance it was the thermostat. He told how to test it with my ohm meter and what range it should be in. I pulled it out and tested it, which was out of the limits he told me it should be in. So I ordered the part. When it arrived in two days, I installed it. The oven now works perfect. Thank you so much. I was just about to go spend $800 on a new oven, and instead fixed it for $75. Awesome website. It was...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 279570
The Door Latch Kit is an OEM replacement part for Whirlpool washers. This component is responsible for securely locking the washer door during the wash cycle, preventing it from opening unexpectedly and ensuring a safe and efficient operation.
Symptoms of needing to replace the door latch kit include:
- Difficulty in closing or latching the washer door
- Door opening unexpectedly during the wash cycle
- Leaks or water seeping due to an improper door seal
- Excessive wear or damage to the latch components
Causes of a faulty door latch kit can include normal wear and tear over time, physical damage due to impact or mishandling, or issues with the door alignment or strike plate.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.
This part fixes the following symptoms
-
Door won't close
-
Shuts off too soon
-
Doesn't shut off
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Dryer door latch worn out Kathy M. • San Diego , CA • February 22, 2015
When I looked up the part number there was a handy video that popped up. I watched the video and thought "how easy!" so, I ordered that part and waited. The next day, I thought I better start to take the door off of my dryer (because that's what the video instructed, and I wanted a head start) so as I was going into the garage to get my tools, my son came in with a small package. It was the part. That came, to quote another customer, "Crazy Fast!" All the way from Kentucky to California! ...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387223
Dryer shuts off before clothes are dry? The moisture sensor bar detects dryness levels. Easy 10-30 minute DIY fix with video guide included.
Do-It-Yourself Stories from Customers like You
First longer to dry then no heat in dryer Bobbie M. • King George , VA • October 06, 2017
I am not an electrician, just a housewife with limited funds and a desire to DIY. I used the provided videos for knowing how to replace everything except the heating element which I just guessed based on other reviews and seeing how the other parts worked. Our dryer is 11 years old Whirlpool Gold HE and I have only ever cleaned the lint tray. My husband replaced the belt about five years ago and he did clean out the inside of the dryer.
Started by ordering a thermal fuse because it was...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP338906
The Flame Sensor is an OEM replacement part for Whirlpool gas dryers. This component plays a critical safety role by monitoring the presence of the gas burner flame during the drying cycle.
Causes of needing to replace the flame sensor can include normal wear and tear over extended use, exposure to high temperatures or corrosion, or physical damage to the sensor itself.
Symptoms that may indicate a faulty flame sensor include:
- The dryer not heating or producing heat properly
- Error codes related to the gas system or ignition failure
- The dryer shutting off unexpectedly during cycles
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models.
This part fixes the following symptoms
-
Shuts off too soon
-
No heat or not enough heat
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
11 year old kenmore elite gas drye stopped working initial diagnosis: burner would light but would shut off in 3 or 4 minutes Jay W. • Dallas , TX • April 05, 2015
I used Fixya as an initial source describing my problem. I got two responses which were very helpful. One that the "coils" were probably the problem. Two, that the problem could be the thermostat or a thermistor in the dryer. I verified that AC was coming from the timing control, that both the two terminal and three terminal coils,the igniter and shut off thermostat all had continuity. I then applied AC directly to the coils: the two terminal coil ""clanked" and I interpreted that as the coil...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR51X10055
Fridge warm but freezer cold? Frost buildup on evaporator coils means a failed defrost heater. This assembly prevents ice blockage, restoring airflow.
This part fixes the following symptoms
-
Too warm
-
Frost buildup
-
Fridge too warm
-
Freezer not defrosting
See more...
Do-It-Yourself Stories from Customers like You
Defroster in freezer not functioning causing the freezer to frost up and the fridge to not cool appropriately Eddie R. • Debary , FL • January 06, 2015
I unplugged the fridge and took all the food and shelving out of the freezer and then proceeded to take off the bottom sliding drawer rack on both sides off (4 Phillips head screws). Then took off the light bulb cover and then the light bulb. Then the back wall that covers the coils and tubes that the refrigerant runs through ( 2 screws with hex head). After sliding out the back wall I could see that the entire coil area was frosted and iced up. I took a blow dryer and melted all of it over...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP308180
Oven not heating or slow to preheat? The bake element is likely burned out. This bottom heating coil replacement is a simple DIY fix in minutes.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Oven is too hot
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Heating element lower broke creating a direct ground fault to the oven wall and resulted a flash of bright fire Stanley B. • Chula Vista , CA • June 16, 2017
My wife was using the oven and she shouted "emergency, oven fire" as i was half asleep in the reclining chair (I will be 86 in Oct.) As I dashed, well not quite, into the kitchen mentioning the fire extinguisher, she exclaimed "no, electrical fire, throw the circuit breaker"....which I very promptly did and the fire was no more; just a lot of bad odor.
Removing the severed 32 year old bake oven element was somewhat delayed due to corrosion of the element mounting screws and electrical...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB44X200
Oven not heating or takes too long to cook? The bake element provides heat from below. Easy DIY repair with a screwdriver in about 15 minutes.
This part fixes the following symptoms
-
Oven is too hot
-
Little to no heat when baking
-
Oven not heating evenly
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Broiler element burnt out on very old oven Deloris B. • Spokane , WA • November 23, 2015
I cannot not sing the praises of this company & their helpful & fast service. I am going to post the online site address w/my praises on my facebook page for my friends that live on ranches many miles from appliance repair shops & towns.
The Oven in our house is for sure over 20 yrs old it was in this home when we bought it, the home is 33 yrs old & the Oven is a Wall Oven, there is not room for a standard Oven in this Kitchen. The Oven itself still looks very nice. About 8 yrs ago or more...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10404050
Lid won't lock or keeps clicking? This washer lid latch assembly fixes locking failures. DIY-friendly repair with video guide, typically done in 30-45 minutes.
This part fixes the following symptoms
-
Lid or door won't close
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
My Maytag bravos mct (Maytag commercial technology) model # mvwx500bw0 washer was not agitating properly and was not spinning at all Mark P. • Mundelein , IL • October 14, 2020
Not wanting to spend hundreds of dollars on an appliance technician's service call, I searched online to troubleshoot the problems with my particular Maytag Washer Model Number MVWX500BW0. I stumbled across AppliancePartsPros.com and investigated there the most likely causes for my Maytag Washer's not agitating properly and not spinning at all. In order to acquire some additional information, I telephoned AppliancePartsPros.com and spoke with an extremely professional, knowledgeable and helpful...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10542314
Fix dishwasher leaks on the floor with this door gasket and strike kit. Easy 15-minute repair—gasket presses into groove, no glue needed. Video included.
Do-It-Yourself Stories from Customers like You
Leaking door gasket Scott N. • Myrtle Beach , SC • July 04, 2014
I followed your step by step instructional online video. That is one great tool you are providing for your customers!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11457841
Washer lid won't lock or stay closed? This lid strike assembly holds the lid securely in place. Simple DIY repair—lift top panel to access and replace.
Do-It-Yourself Stories from Customers like You
Lid wouldn't lock on washing machine Tim K. • P.O. Box 644 Sheridan , MT • August 12, 2025
Ordered parts from Appliance Parts Pros and replaced them.Works like new
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7406P428-60
Oven not heating or baking unevenly? The lower bake element produces heat for consistent baking. Simple DIY repair—unscrew, unplug, and replace in 5 minutes.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Lower oven would not heat up on maytag gemini electric range Jason B. • Boylston , MA • October 19, 2014
Replaced lower and upper element. Internet research suggested it was the control board. Thankfully it was a much quicker and cheaper fix.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 279769
Dryer not heating? This thermal cut-off kit prevents overheating by shutting off heat when temps get too high. DIY-friendly repair under $60.
This part fixes the following symptoms
-
No heat or not enough heat
-
Too hot
See more...
Do-It-Yourself Stories from Customers like You
Old Whirlpool dryer model LE8650XWW0 would not heat purchase in 1993. Byron V. • Huntsville , AL • December 08, 2017
Since the dryer was 24 years old I opted to replace all the possible problem components, instead of just the bad one. The parts aren't that expensive and do to their age I figured it was worth it to avoid having to go back into the dryer in a few months. The repair was surprisingly easy and went pretty much as the video instruction AppliancePartPros provided with one exception. Because, my model was much older than that used in the video, I had a more difficult time replacing the Heating...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11429587
This is the door catch that secures the dryer door in the closed position during operation. It engages with the door strike or latch to keep the door firmly shut so the dryer can run. Replace this part if the dryer door won't stay closed, pops open during a cycle, or the dryer won't start because the door switch isn't engaging properly.
Do-It-Yourself Stories from Customers like You
Dryer door catch broke, unable to close the door! Stella H. • Beverly Hills , FL • April 10, 2020
I watched your video and had it fixed in less than 1 minute!
Read more
More